SOLEKICK MagClick 10000 mAh 15W Wireless Power Bank Instruction Manual

SOLEKICK MagClick 10000 mAh 15W Wireless Power Bank

Product Information

• Product Name: Receiver
• Usage: Radio/TV receiver
• Size: 165x100mm

Product Usage Instructions

• Ensure that the receiver is connected properly. In case of any difficulty in connecting the receiver, consult the dealer or an experienced radio/TV technician for help.
• It is recommended to maintain a distance of at least 20cm between the user and the product.
• Do not make any changes or modifications to the product as it could void the user’s authority to operate the equipment.

Functions

1. 2-in-1 Tip
2. Type-C Tip
3. Micro Tip
4. USB-A Input Cable
5. Power Display LED Screen
6. Type-C Input/Output Port
7. USB-A Output Port
8. Wireless Charging Surface
9. -Magnetic Surface
10. ON/OFF Power Button
11. LED Indicator

What’s included

• 1x Wireless Power Bank with Built-in Cables
• 1x Instruction Manual
• 1 xUSB-A to Type-C Cable

Tech Specifications

• Capacity: 10000mAh/3.7V/37Wh
• Type-C Input(20W max): DC 5V/3A 9V/2.22A 12V/1.67A
• Type-C Output(20W max): DC 5V/3A
  • 9V/2.22A 12V/1.67A
• USB-A Output(18W max): DC 5V/3A,9V/2A,12V/1.5A
• Wireless Output: 15W
• Built-in cable Output: DC 5V/3.1A(MAX)
• Built-in cable Input: DC 5V/2.1A

Instructions

Charging the Powerbank

• Be sure the power bank is fully charged before usage.
• Using the built-in USB input cable(4), insert the USB-A tip into a certified AC adapter.
• Or using the included USB-A to Type-C cable, insert the Type-C tip into Input Port(6) and USB-A tip to a certified USB AC adapter or input port of power source.
• Once connected, the LED display(5) will show the percentage of charge remaining and when fully charged the LED display will show “100%”
• Once the power bank is fully charged remove the device from the power source.

Charging Mobile Phones and Other Electronic Devices

• Press the ON/OFF button(10) to turn OON the power bank.
• Once power bank is ON, connect the appropriate built-in charging cables to your mobile phone/device
• Or you can also connect your own charging cable to your mobile phone/device using the appropriate connector. Connect the USB tip of the cable into USB-A Output(7) or Type-C tip into the Type-C output(6).
• The phone will begin to charge automatically, the LED display will show the percentage of remaining charge in the power bank.
• Disconnect the charging cable from your mobile device when it is fully charged.

Wireless Charging Mobile phones and other electronic devices

• Press the ON/OFF button(10) once to turn on the power bank, the LED display(5) will show the remaining power.
• Place the wireless charging supported mobile device on the wireless charging surface(8), it will begin to charge automatically and there is wireless charging symbol on the LED screen(5).
• Once fully charged remove the device.
• Double-press the button to turn off the power bank.

Note: When wireless charging, if the LED indicator(11) shows RED the device is either NOT a wireless charging device or there is an object between the the device and charging surface interfering with thee charging process.

Wireless Charging with Magnetic Surface:

• If your device supports MagSafe, the magnets in your iPhone will connect to the magnetic surface(9) of the pad for more secure charging.
• This item is also compatible with other items, the magnetic function just won’t Work.

SAFETY PRECAUTIONS

WARNING: When using this product, basic precautions should always be followed:

1. Read all the instructions before use.
2. Never store or use this product in temperatures below 32° F(0°C) or above 115° F(45°C).
3. Do not overcharge your phone. The unit may become hot under excesSive use. Remove your phone once it is fullycharged. Never charge your phone for more than 7 hours at a time.
4. The unit will only achieve full performance after 2 or 3 completed charge and discharge cycles.
5. To reduce the risk of injury, close supervision is required when the product is used near children.
6. Do not expose the device to moisture.
7. Do not use the device in excess of its output rating. Overload outputs above the rating may result in a risk of fire or injury
8. Do not use the device if damaged or modified.
9. Do not disassemble the device. For repairs, seek a qualified service professional. incorrect reassembly may result in a risk of fire or injury.
10. Do not expose the device to fire or excessive temperature. Exposure to fire or temperatures above 104°F may cause explosion.
11. Ensure that qualified service professionals use only identical replacement parts to ensure product safety.
12. Attachments on the back of your phone can impede the effectiveness of the Wireless charger, and lead to overheating.
13. Please remove any attachments from the phone before charging on this device, attachments can interfere with wireless charging and lead to over heating.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The distance between user and the products should be no less 20cm.

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>