PANMIN HI-3 Mini PC User Manual

PANMIN HI-3 Mini PC

Product Information

The mini PC comes with various accessories such as a power adapter, wall- mounted bracket, and quick installation guide. It has a range of ports including USB 2.0, USB 3.0, HDMI, Type-C, LAN, headphone jack, and microphone jack. The device can be upgraded using DDR4 memory, M.2 SSD card, and 4G module. It also has a SIM card slot for mobile data connectivity. The mini PC is compliant with Part 15 of the FCC Rules.

Products and Accessories

• MINI PC x1
• Power button (ON/OFF)
• Reset key (restart button for special cases)
• USB 2.0 port (connect with USB peripheral device)
• DC in port (connect with adapter)
• LAN port (connect with Ethernet cable)
• USB 2.0 port (connect with USB peripheral device)
• USB 3.0 port (connect with USB peripheral device)
• HDMI port (connect with HDMI cable)
• Type-C port (connect with Type-C cable)
• Headphone jack (connect with headphone)
• Microphone jack (connect with microphone)
• Power adapter x1

Installation Instructions

• Quick Installation

1. Connect the display device via HDMI line or DP line or Type-C line.
2. Connect the internet via network cable or Wi-Fi.
3. Connect the powersupply via the DC adapter (factory accessories).
4. Connect the keyboard and mouse (self-provided) via USB interface.

• Wall-Mounted Bracket Installation
  The accessory also comes with a Wall-Mounted bracket to hang the mini- console from a wall-mounted display on the back. Follow the steps below:

1. Attach the stand to the Mini-PC.
2. Attach the stand and mini-host to the back of the display device.

• DIY Installation
  If you want to upgrade the mini-host by DIY, follow the installation guide for installation. This mini-host can be easily upgraded by DIY using the quick disassembly method.

  • DDR4 Memory Installation:
    After disconnecting the power cord, align the memory strip to the card slot, insert it into the slot at an inclined angle, press the two ends downward until there is a clack if successful.

  • SSD M.2 Card Installation:

  • After disconnecting the power cord, align the SSD card with the card slot and tilt it into the slot (as shown in arrow).

  • Lay the other end of the SSD card flat and lock the screw (as shown in arrow).

  • 5G Module Installation:

  • Determine the front and back sides of the hard disk through the anti-stick port.

  • Align the 5G module with the card slot, insert it diagonally into the card slot, lay it flat, and tighten the screws.

  • SIM Card Installation:

  • Make sure to shut down and cool down the device before performing the following operations.

  • Use a screwdriver to remove the bottom six screws and open the bottom cover.

  • See the SIM card slot and push the slot in the direction of the arrow.

  • Open the card banknote and put the SIM card into the card inside and lock the clamping slot.

  • Finally, fix the bottom screw.

Usage Instructions

1. Read the user manual and keep it after use for future reference.
2. Connect necessary peripherals such as display device, keyboard, and mouse.
3. Connect to the internet via network cable or Wi-Fi.
4. Power on the device using the power button.
5. Use the device for your desired purposes.
6. Power off the device using the power button when finished.

Note:
Failure to use the included power adapter may violate regulatory compliance requirements and may expose users to safety hazards. Specifications are subject to the physical product.

Thank you for choosing mini PC. For your convenience in using the product, please read this User manual, and keep the User manual after use for future use.

Products and accessories

Failure to use the included power adapter may violate regulatory compliance requirements and may expose the user to safety hazards.
*Specifications are subject to the physical product.

Basic Operation

1. Power button (ON/OFF)
2. Reset key (Restart button for special cases)
3. USB2.0 port (Connect with USB peripheral device)
4. DC in port (Connect with adapter)
5. LAN port (Connect with ethernet cable)
6. USB2.0 port (Connect with USB peripheral device)
7. USB3.0 port (Connect with USB peripheral device)
8. HDMI port (Connect with HDMI cable)
9. Type-Cport (Connect with Type-C cable)
10. Headphone jack (Connect with headphone)
11. Microphone jack (Connect with microphone)

Quick Installation

Wall-Mounted bracket installation instructions

• The accessory also comes with a Wall-Mounted bracket to hang the mini-console from a wall-mounted display on the back;
• Remove the bracket first, then screw the mini to the bracket, and screw the hostand bracket to the back of the monitor.

DIY installation instructions

If you want to upgrade the mini host by DIY, please refer to the following installation guide for installation. This mini host can be easily upgraded by DIY using the quick disassembly method.

DDR4 Memory Installation
If you want to upgrade the mini host by DIY, please refer to the following installation guide for installation. This mini host can be easily upgraded by DIY using the quick disassembly method. Please follow belowing steps after turn off and cool down the device:

1. After disconnecting the power cord, align the memory strip to the card slot, insert it into the slot at an inclined Angle, press the two ends downward, there is a clack if success

SSD M.2 Card Installation（Only the M.2 interface is supported）

1. After disconnecting the power cord, align the SSD card with the card slot and tilt it into the slot.(As shown in Arrow ①)
2. Lay the other end of the SSD card flat and lock the screw. (As shown in Arrow ②)

5G module installation

• Before installation, ensure that the device is powered off and cooled down before performing the following operations.
• The 5G module is used as an example.
• Determine the front and back sides of the hard disk through the anti-stick port, align the 5G module with the card slot, insert it diagonally into the card slot, lay it flat, and tighten the screws.

SIM card installation
Before installation, please make sure to shut down and cool down, and then follow the following steps. then use a screwdriver to remove the bottom six screws and open the bottom Cover, see the SIM card slot, push the slot in the direction of the arrow, then open the card banknote and put the SIM card into the card Inside, and lock the clamping slot. Finally, fix the bottom screw.

FCC Requirement

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.
• Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  •  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.“
  CAUTION: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.”

Warranty Card

ABOUT COMPANY

• Producter: Shenzhen Panmin Technology Co.,Ltd
• Origin: Shenzhen, China
• Address: 501 Building A, Weihuada Industrial Park, No.5, Lirong Road,
• Dalang Street, Longhua District, Shenzhen, Guangdong,China
• Tel:400-998-3678
• Web: www.peladn.com
• E-mail: [email protected]

References

• PELADN: Beyond The Gamers

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>