TWS-06P-NWT Ocely Lilt Sport Wireless Earbuds Bluetooth User Manual

TWS-06P-NWT Ocely Lilt Sport Wireless Earbuds Bluetooth

Product Information

This product is a set of wireless earbuds that come with a charging case. The earbuds have R, L, RS, and LS labels to indicate which ear they should be placed in. The charging case has a Type-C connector for charging and LED lights to indicate the charging status of the earbuds and the case.

Product Usage

1. Before using the earbuds, wipe off any water or sweat to avoid erosion.
2. Place the earbuds properly in the charging case with their respective labels facing up.
3. The red LED lights will turn on indicating that the earbuds are charging. Once fully charged, the blue LED lights will turn on.
4. If the battery of the charging case is low, the LED light will turn red and flash constantly until charged.
5. When putting the earbuds back into the charging case, the LED lights will display the battery capacity of the case.

By following these instructions, you can ensure that your wireless earbuds are properly charged and ready to use whenever you need them.

PACKING LIST

DIAGRAM

CHARGING

Please wipe off water and sweat before putting earbuds back into the case to avoid the risk of erosion. Please confirm that the earbuds are well placed in the charging case and the red LED lights turn on, indicating that earbuds are charging, if blue LED lights turn on, indicating that earbuds are fully charged.

The led light turns to red and flash constantly while the battery of the charging case is low. Will display battery capacity of case while earbuds put back charge case

POWER ON

1. The earbuds automatically turn on (With Blue LED lights flashing) and start pairing when taking the earbuds out of the charging case.
2. In the shutdown status, when the earbuds are not in the charging case, simultaneously press and hold the MFB of both earbuds for 2 seconds to power on (with the Blue LED lights flashing).

POWER Off

1. Put the earbuds back into the charging case to turn them off.
2. If the earbuds are in pairing mode for over 5 minutes, they will automatically turn off to save battery.

Pairing

When taking the earbuds out of the charging case, they will automatically enter pairing mode, select ‘Ocely Lit’ from your Bluetooth device setting to connect.

Note:
The earbuds will reconnect to the paired device, if you would like to pair a new device, please see ‘RESET”.

MUSIC

INCOMING CALL

MUSIC

1. Next/Previous Track
   • Next Track: Double-click the MFB button of either earbud.
   • Previous Track: Triple-click the MFB button of either earbud
2. Play/Pause
   Click the MFB of either earbud once.

Modes

Mode 1 (R) Hear Through Mode

Mode 2 (L) or (R) Game Mode

1. Press and hold the MFB button of the Left earbud for 2 seconds.
2. Click 4 times the MFB of either earbud.

VOICE ASSISTANT

Activate Voice Assistant(Siri or Google Assist)
Press and hold the MFB button of the Left earbud for 2 seconds.

RESET

When the earbuds are powered on, simultaneously press and hold the MFB of both earbuds for 5 seconds to clear pairing information. (The LED light will flash blue and red when successed)

CORRECT DISPOSAL OF THIS PRODUCT

(Waste Electrical & Electronic Equipment)
This Marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal., please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>