KleanseAIR KA-DUO440 DUO Air Purifier User Manual

KleanseAIR KA-DUO440 DUO Air Purifier

PRODUCT INFORMATION

The KleanseAIR DUO Air Purifier is a portable commercial air filtration system that utilizes multistage treatment and filtration to remove airborne particles such as dust, debris, microorganisms, mold, spores, bacteria, viruses, pet dander, and smoke. The KleanseAIR DUO is equipped with a pre-filter and a custom-made deep HEPA filter that removes particles at 0.3 microns and larger.

Safety Notices/Use/Warranty

Before using the KleanseAIR DUO Air Purifier, read and save all notices, warnings, and safety instructions received with the equipment. If using the unit in a containment work area, turn off all sources of power to open combustion appliances such as fireplaces, boilers, furnaces, water heaters, and HVAC systems to avoid the risk of back drafting deadly carbon monoxide fumes from those appliances. Do not sit or ride on the unit. Do not set any liquids on the top of the unit or store items on top of the unit. It is not recommended to stack units on top of each other. When stacking units for storage or transportation in the original packaging, beware of tipping. Falling equipment could cause bodily harm.

Read and save all notices, warnings, and safety instructions received with equipment

Injury to Persons Hazard
If using the unit in a containment work area, turn off all sources of power to open combustion appliances such as fireplaces, boilers, furnaces, water heaters, and HVAC systems to avoid the risk of back drafting deadly carbon monoxide fumes from those appliances. Do not sit or ride on the unit. Do not set any liquids on the top of the unit or store items on top of the unit.

Tipping Hazard
It is not recommended to stack units on top of each other. When stacking units for storage or transportation in the original packaging, beware of tipping. Falling equipment could cause bodily harm.

WARNING Always disconnect power to the equipment and unplug before performing any service or maintenance.
CAUTION Do not operate without proper electrical ground.
DANGER On equipment with blowers keeps inlet and outlet vents, clean and clear of objects.

How It Works

The KleanseAIR DUO Air Purifier utilizes a multistage treatment and filtration process to remove airborne particles such as dust, debris, microorganisms, mold, spores, bacteria, viruses, pet dander, and smoke. The KleanseAIR DUO is equipped with a pre-filter and a custom-made deep HEPA filter that removes particles at 0.3 microns and larger.

The KleanseAIR DUO is your solution to improving your personal indoor air quality by removing particulates, microorganisms, and allergens, all at once through a 2-stage process. Stage l consists of a pre-filter that is used to maximize the life of the primary HEPA filter. Stage 2 uses a HEPA filter to capture harmful dust, allergens, pet dander, microorganisms, and other particulates larger than .3 microns. Stage 3 uses Carbon Fiber Bi-Polar Ionization to help agglomerate particles to be captured. The KleanseAIR utilizes multistage treatment and filtration enhanced to remove airborne particles such as dust and miscellaneous debris, and destroying microorganisms caught in the filter. The small size of the KleanseAIR allows it to be portable and easily maneuverable.

1. Stage 1: 14” x 14” x 1” MERV 8 Pre-Filter
   This filter is used to clean the air of larger particles to keep the primary HEPA filter clean. These are standard filters that can be purchased online or at a local hardware store.

2. Stage 2: HEPA Micro Pleated Media Filter
   This deep HEPA filter removes particles at 0.3 microns and larger such as atmospheric dust, mites, pollen, mold, spores, fungi, bacteria, viruses, pet dander, smoke, and more. We recommend changing this filter 12-24 months or as needed. This filter is custom-made by GallatinAIR, and you will need to contact us for replacements.

3. Stage 3 –Carbon Fiber Bi-Polarization Unit – UL Certified
   GallatinAIR’s latest CFBI™ technology creates millions of positive and negative ions deployed in government buildings, educational institutions, and medical offices. Also, ion bonding to particles increases their size to be more easily captured by the unit’s extra deep HEPA filter. This unit has a 7-10 year life expectancy.

Recommended Setup

The KleanseAIR DUO Air Purifier is portable and easily maneuverable. The airflow from the KleanseAIR DUO is controlled with a variable speed controller, which allows you to set the airflow at any speed you desire. The following provides you with an estimated airflow at each position:

• Off Position – In this position, the power to the fan is turned off.
• High Position – This is the maximum fan speed.
• Medium Position – This is the medium fan speed.
• Low Position – This is the low fan speed.

Set up the air system in an area where it will provide good air circulation but won’t get in the way. To help circulate air, you may want to set up one or more fans somewhat distant from the KleanseAIR unit(s). Have the fan(s) blow the air toward the air unit(s). This will help exchange the air so that it quickly gets processed through the system.

• Leaving a system running 24/7 will help clear the air faster.
• Do not place the air unit directly against a wall, as you want to ensure airflow.
• Please do not use it with an ozone-producing machine.

SETTING FAN SPEED

Airflow from the KleanseAIR™ is controlled with a variable speed controller. This allows you to set the airflow at any speed you desire. The following provides you an estimated airflow at each position.

TROUBLESHOOTING

Maintenance

Always disconnect the power to the equipment and unplug it before performing any service or maintenance. Do not operate without proper electrical ground. On equipment with blowers, keep inlet and outlet vents clean and clear of objects. Wear NIOSH-approved protective gear when changing the HEPA filter as it may contain mold spores and contaminants. Change the KleanseAIR Pre-Filter and HEPA filter after every remediation job. Dispose of used HEPA according to your local regulations. We recommend changing the HEPA filter every 12-24 months or as needed.

CONTACTING US
To contact us with questions of any kind, please call us at 855.250.2400 or email us at info@gallatinair.com.

REPLACING FILTERS

• MAIN HEPA FILTER: These filters are designed explicitly for GallatinAIR KleanseAIR units to maximize the effectiveness of the air filtration process. We advise replacing the filter every 12-24 months depending on the air you are filtering. When you need a new filter(s), please contact us directly at 855-250-2400. When this manual was printed, the replacement filters are $109 each (with free shipping). If you want to order several filters, we would be happy to extend you a discount depending on the number you purchase.
• PRE-FILTER (14″ x 14″ x 1″): We recommend purchasing a MERV 8 filter from an online provider such as Amazon as they are relatively inexpensive. You can also buy these filters at most local hardware stores.
• AUTO REFILL PROGRAM: For those who are busy and don’t want to worry about ordering new filters on time, GallatinAIR offers an automatic refill program. The yearly refill contains one (1) HEPA FILTER, (2) PRE-FILTERS, and (2) UVC LIGHTS. If you would like to sign up for yearly, please contact us at 855-250-2400.

Lifetime Limited WARRANTY

At GallatinAIR, we stand behind our products with a lifetime limit on the enclosure and a 1-Year warranty on major electrical components.

• Enclosure: Should you experience any defects in materials or workmanship with the enclosure over the unit’s lifetime, we will repair or replace the unit for free.
• Main Centrifugal Fan: If, within 12 months from the date of purchase, the primary fan fails, GallatinAIR will repair or replace the defective fan.
• All other electrical components: If within 12 months from date of purchase, any other electrical part fails (e.g., indicator lights, ballasts), GallatinAIR will repair or replace the unit for free.

The above is subject to the following conditions:

• Any claim made under this warranty must include a copy of a valid proof of purchase showing the date and place of purchase.
• Our obligation under this warranty is to the original purchaser only and may not be transferred.
• Product replacement does not include shipping costs or labor installation costs.
• GallatinAIR reserves the right to examine the product in question and its installation environment before replacement.
• If an identical replacement product is not available, GallatinAIR reserves the right to replace the defective product with a similar product.

This warranty relates to defects in manufacture, materials, or workmanship in a GallatinAIR KleanseAIR product supplied for use into commercial premises in the United States. It does not extend to:

• Damage resulting from failure to maintain the product in accordance with the Care and Maintenance instructions provided with the product.
• Normal wear and tear, scratches, or accidental damage
• Faults arising from improper use and/or installation.

All incidental or consequential damages are expressly excluded. No additional warranties, express or implied, are given, including but not limited to, any implied warranty of merchantability or fitness for a particular purpose.
When requesting warranty service, you will need to provide:

• an approved Return Merchandise Authorization number (RMA) issued by Customer Service
• a dated, valid proof of purchase (payment receipt from an authorized GallatinAIR reseller)
• a description of the problem

Shipping Your Unit to GallatinAIR: Items must be safely and adequately packed in such a manner to prevent damage to the part or product during shipment. For your safety, please ship via an insured carrier, which employs package tracking. GallatinAIR will provide a shipping label to the customer along with an RMA number.
Shipping Unit from GallatinAIR: After the warranty service is completed, any repaired or replacement parts/products will be return-shipped via Standard Ground Service paid for by the customer. Upgraded expedited shipment is available for a fee.

GallatinAIR will not service received items when:

1. The item is inspected and found to be not covered by the warranty.
2. The item is inspected and found to be damaged during shipment due to lack of proper packaging.

Return shipment of such products will be at the expense of the customer.
For products that are discontinued and no longer serviceable and/or replaceable, a pro-rated credit towards a purchase of another similar GallatinAIR brand product will be issued.

For Warranty Services, please contact for instructions:
GallatinAIR, LLC. 1-855-250-2400
www.gallatinair.com

GallatinAIR, LLC.
855-250-2400
info@gallatinair.com
www.gallatinair.com

References

• gallatinair.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>