TECHNAXX TX-163 2-Way 12V-24V Splitter TX-163 with 2x USB USB-C and Smart Charging User Manual
- June 4, 2024
- Technaxx
Table of Contents
TECHNAXX TX-163 2-Way 12V-24V Splitter TX-163 with 2x USB USB-C and Smart Charging User Manual
The manufacturer Technaxx Deutschland GmbH & Co.KG hereby declares that this
device, to which this user manual belongs, complies with the essential
requirements of the standards referred to the Directive
EMC 2014/35/EU. The Declaration of Conformity you find here:
www.technaxx.de/ (in bar at the bottom
“Konformitätserklärung”). Before using the device the first time, read the
user manual carefully.
Service phone No. for technical support: 01805 012643 (14 cent/minute from
German fixed-line and 42 cent/minute from mobile networks). Free Email:
support@technaxx.de
The support hotline is available Mon-Fri from 9am to 1pm & 2pm to 5pm!
Keep this user manual for future reference or product sharing carefully.
Do the same with the original accessories for this product. In case of
warranty, please contact the dealer or the store where you bought this
product.
Warranty 2 years
Enjoy your product. *Share your experience and opinion on one of the well- known internet portals.
Products marked with this symbol meet all applicable community regulations of the European Economic Area. Technaxx Deutschland GmbH & Co KG has issued a “declaration of conformity” in accordance with the applicable directives and relevant standards. has been created. This can be viewed at any time upon request.
Hints for Environment Protection: Packages materials are raw materials and can be recycled. Do not disposal old devices or batteries into the domestic waste. Cleaning: Protect the device from contamination and pollution (use a clean drapery). Avoid using rough, coarse-grained materials or solvents/aggressive cleaner. Wipe the cleaned device accurately. Important Notice: Should battery fluid leak from a battery, wipe the battery case with a soft cloth dry. Distributor: Technaxx Deutschland GmbH & Co.KG, Konrad-Zuse-Ring 16-18, 61137 Schöneck-Kilianstädten, Germany
Product overview
Features
- Use of up to 5 devices with one 12V / 24V socket
- 2 USB ports and 1 USB-C port with QC3.0
- On/Off switch for separate usage of both 12V/24V sockets
- LED screen for voltage indication
- Swivel for easy access
- Replaceable 10 Ampere safety fuse
Technical specifications
Operation
This product is a 2-way splitter and charging adapter for cigarette lighter sockets and is intended for use in indoor areas only.
Functions
Splitter
Power/charge two devices e.g. dash cam and navigation with one cigarette
socket simultaneously. Each device can be switched on/off separately using the
switches (1) on top of the device.
USB ports
Orange USB port supports QC3.0. If your mobile phone supports Quick-Charge, it
will be charged based on QC3.0 like DC 3.56.5V/3A, 6.5-9V/2A, 9-12V/1.5A. For
further instructions or explanations please check the manual of your device.
The other USB port is a regular charging port and supports 5V/2.4A. USBC port
supports 5V/3.4A.
Safety
Fuse
This device is secured by a 10A automotive fuse at the bottom against power
peaks and short circuits. If the TX-163 doesn’t work in regular condition,
please check and change the fuse.
Voltage display
The display indicates the current voltage of the car battery. If it drops
below 12V the numbers will flash. In this case please check the battery power
of your car. It may be don’t support enough power anymore
Warnings
-
Never put any electric conductive into the plug of the cigarette
lighter socket! Risk of electric shock occurs. -
To protect the TX163, pull it out when starting the car.
-
Improper use may result in damage to itself or attached products. Therefore, never dismantle / disassemble / remove any cover of it to avoid the risk of an electric shock, damages or short-circuit.
-
Do not drop or shake it (it may break internal circuit boards or mechanics).
-
Keep it in dry, ventilated environment and avoid high temperature (keep it away from direct sunlight, do not install it near any heat source)
-
Avoid humidity (rain, moisture, dripping, splashing) to reduce the risk of fire or electrical shock.
-
Never immerse the product in water or other fluids.
-
Only use this device with voltage specified on the device.
-
Never use the device if it shows visible signs of damage.
-
Keep it away from children.
-
Technical specifications are subject to change without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>