Shark IR100 Series ION X30 Cordless Vacuum User Manual
- June 9, 2024
- Shark
Table of Contents
Shark IR100 Series ION X30 Cordless Vacuum User Manual
IR100 Series
QUICK START GUIDE
[Please make sure to read the enclosed Shark® Owner’s Guide prior to using your vacuum.]
This article contains the Owner’s Guide for the IR100 Series Shark® ION™ X30. This supports the following product SKUs IR101, IR100, IR100C, and IR101C.
Use this Quick Start Guide to start using your new vacuum’s great features.
For questions, visit us online at sharkclean.com
Register your vacuum at registeryourshark.com
WHAT’S INSIDE:
A. Handheld Vacuum
B. Motorized Floor Nozzle
C. Wand
D. Onboard Storage Hook
E. 8˝ Crevice Tool
F. ION Power Pack
G. ION Power Pack Charger
ASSEMBLY
For complete maintenance instructions, see the enclosed Owner’s Guide.
For additional parts and accessories, visit
sharkaccessories.com.
For additional batteries and charging accessories, visit
sharkclean.com/batteries.
SMART RESPONSE™ TECHNOLOGY
Press the Surface Settings button to switch floor types. Press the ION BOOST button to intelligently switch between ION POWER AND ION BOOST.
NOTE : For deep cleaning per ASTM F 608 (embedded dirt in carpets) please select CARPET and ION BOOST settings.
NOTE : Select Carpet setting for stuck-on dirt and debris.
ION POWER PACK
NOTE : Full charge takes approximately 3.5 hours.
Battery Indicator Lights
NOTE : ION Power Pack comes with a partial charge.
Fully charge prior to first use and then completely discharge to condition the
pack.
VERSATILE CHARGING
Easily Insert or Remove the ION Power Pack
To insert, slide the ION Power Pack into the slot in the back of the hand vac.
To remove, pinch the release tab then slide out the ION Power Pack.
VERSATILE CLEANING
FLOOR:
Press the Power button, then choose your Surface setting and your Suction setting. Place your foot gently on the floor nozzle and tilt the handle back.
NOTE : Brushroll will only engage when the handle is tilted back.
ABOVE-FLOOR:
Stand the vacuum upright.
Step on the Floor Nozzle Release button and pull the wand up to disconnect it
from the motorized floor nozzle.
OR
Press the Wand Release button on the top of the wand to disconnect it from the handheld vacuum.
Attach desired cleaning accessory, then choose your Suction setting.
CONVENIENT STORAGE
Release the handvac and hook onto wand for convenient storage in small spaces.
Wall Mount and additional charging options available at sharkaccessories.com.
EMPTYING THE DUST CUP
1. To empty dust cup, first remove the handvac from the wand by pressing the Wand Release button and pulling up on the handvac.
2. Position dust cup over a trash bin, then open the bottom of the dust cup by pressing the Dust Cup Release button on the side.
©2018 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC. SHARK ION and SMART RESPONSE are trademarks of SharkNinja Operating LLC.
IR100_QSG_REV_MP_180621
DOWNLOAD
Shark IR100 Series ION X30 Cordless Vacuum:
Quick Start Guide – [Download PDF]
Owner’s Guide – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>