FUJITSU D3313 Industrial Mainboard Instructions
- June 9, 2024
- FUJITSU
Table of Contents
FUJITSU D3313 Industrial Mainboard Instructions
Congratulations on buying an innovative product from Fujitsu.
The latest information about our products, tips, updates etc. can be found on
the Internet at: “http://www.fujitsu.com/fts/” For driver updates, go to:
“http://support.ts.fujitsu.com/download” Should you have any technical
questions, please contact:
-
our Hotline/Service Desk (see the Service Desk list or visit:
“http://support.ts.fujitsu.com/contact/servicedesk“) -
Your sales partner
-
Your sales office
We hope you enjoy working with your new Fujitsu system!
Published by / Contact address in the EU Fujitsu Technology Solutions GmbH
Mies-van-der-Rohe-Straße 8 80807 Munich, Germany
“http://www.fujitsu.com/fts/”
Copyright © Fujitsu Technology Solutions GmbH 2015. All rights reserved.
Publication Date 07/2015 Order No.: A26361-D3313-Z321-1-7419, edition 2
D3313-A, D3313-E, D3313-G
D3313-B, D3313-F
D3313-S
Remarks
Product description information meets the design requirements of Fujitsu and
is provided for comparison purposes. The actual results may differ due to
several factors. Subject to technical changes without prior notification.
Fujitsu rejects any responsibility with regard to technical or editorial
errors or omissions.
Trademarks
Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited or
its subsidiaries in the United States and other countries.
Microsoft and Windows are trademarks or registered trademarks of the Microsoft
Corporation in the United States and/or other countries.
AMD Copyright, the AMD Arrow logo and combinations thereof are trademarks of
Advanced Micro Devices, Inc.
PS/2 and OS/2 Warp are registered trademarks of International Business
Machines, Inc.
Any other trademarks specified herein are the property of their respective
owners.
Copyright
No part of this publication may be copied, reproduced or translated without
the prior written consent of Fujitsu.
No part of this publication may be saved or transmitted by any electronic
means without the written consent of Fujitsu.
Brief description of mainboard
Information about boards
Be sure to observe the following for boards with ESD:
- You must always discharge static build up (e.g. by touching a grounded object) before working with the board.
- The equipment and tools you use must be free of static charge.
- Remove the power plug from the mains supply before inserting or removing boards.
- Always hold boards by their edges.
- Never touch connector pins or conductors on the board.
An overview of the features is provided in the data sheet.
Special features
Your mainboard is available in different configuration levels. Depending on
the configuration, your mainboard will be equipped with or provide support for
certain features. This manual describes the most important properties of this
mainboard.
Additional information on mainboards is provided in the “Basic information on mainboard” manual on the “User Documentation” or “OEM Mainboard” DVD, or on the Internet.
Interfaces and connectors
The location of the interfaces and connectors of your mainboard is specified
at the beginning of the manual.
The components and connectors marked are not necessarily present on the
mainboard.
External ports
The location of the external connections of your mainboard is specified at the beginning of the manual.
ℹ According to the USB 2.0 specifications, no more than 500 mA must be
connected to the external USB ports.
The use of a new chip set technology can mean that the procedure is different
when connecting older USB devices (Full speed, USB 1.1). This relates, for
example, to older digital cameras of which only one (not two or more at the
same time) can be operated at any one time. Newer devices with specification
USB 2.0 are not affected by this.
Processor technical data
SoC Type (Package / Platform), Host Interface (CPU)
- D3313-A: AMD FT3 / GX-415GA eKabini 1.5 GHz quad core (15W) 4cM
- D3313-B: AMD FT3 / GX-217GA eKabini 1.65 GHz dual core (15W) 2cM
- D3313-E: AMD FT3b / GX-424CC Steppe Eagle 2.4 GHz quad core (15W) 2CU GPU*
- D3313-F: AMD FT3b / GX-222GC Steppe Eagle 2.2 / 2.4* GHz dual core (15W) 2CU GPU
- D3313-G: AMD FT3b / GX-222GC Steppe Eagle 2.2 / 2.4* GHz dual core (15W) 2CU GPU
- D3313-S1: AMD FT3 / GX-210HA eKabini 1.0 GHz dual core (9W) 2cL
- D3313-S2: AMD FT3 / GX-217GA eKabini 1.65 GHz dual core (15W) 2cM
- D3313-S3: AMD FT3 / GX-420CA eKabini 2.0 GHz quad core (25W) 4cH
- D3313-S4: AMD FT3b / GX-222GC Steppe Eagle 2.2 / 2.4* GHz dual core (15W) 2CU GPU
- D3313-S5: AMD FT3b / GX-412HC Steppe Eagle 1.2 / 1.6* GHz quad core (7W) 2CU GPU
*CU = Computing Unit **Boost Frequency
Installing/removing main memory
Technical data
⚠ Only unbuffered 1.25V / 1.35V / 1.5V memory modules without ECC are
permitted to be used. DDR3 memory modules must comply with the PC3-10600,
PC3-12800 or PC3-14900 specification.
⚠ Module 1 must be equipped first!
ℹ The mainboards have up to two module slots. Depending on how the system is
configured, the visible main memory may be reduced.
The installation/removal is described in the “Basic information on mainboard”
manual.
BIOS Update
When should a BIOS update be performed? Fujitsu Technology Solutions makes new
BIOS versions available to ensure compatibility with new operating systems,
new software or new hardware. In addition, new BIOS functions can be
integrated. A BIOS update should also always be performed if there is a
problem that cannot be solved using new drivers or new software.
Where can I obtain BIOS updates? You can find the BIOS updates on the Internet
at “http://support.ts.fujitsu.com/“.
BIOS update under Windows with Desk Flash program
A BIOS update can also be carried out under Windows with the Desk Flash
program. The Desk Flash program is located on the “Drivers & Utilities” data
carrier (under Flash BIOS). or
► Download the “Flash BIOS Update Desk Flash Instant” update file from our
website to your PC.
► Run the update file.
► Follow the on-screen instructions.
BIOS update using a USB stick
► Make sure you have a bootable USB stick available.
► Download the “Admin package – Compressed Flash Files” for bootable USB
sticks from our website to your PC.
► Unzip the ZIP file and copy the files onto your bootable USB stick.
► Reboot the PC.
► Select the USB stick as the boot device.
► Boot from the USB stick and start DosFlash.BAT.
► Follow the on-screen instructions.
References
- Fujitsu Technical Support pages from Fujitsu EMEA
- Fujitsu Technical Support pages from Fujitsu EMEA
- Fujitsu Technical Support pages from Fujitsu EMEA
- Fujitsu EMEIA : Fujitsu Global
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>