SUNNY EX Series 4 Emergency Exit Sign Light User Manual
- June 9, 2024
- Sunny
Table of Contents
SUNNY EX Series 4 Emergency Exit Sign Light
Product Information
The Emergency Exit Sign Light Box Series comes in two Slim Line Series variants – Type C,W and Type R. The product features LED AC indicating input status and LED Full LED Charge indicating charging and battery status. The product has a switch for turning it on/off and testing its availability during normal circumstances. The product is designed with a clear acrylic sheet that evenly diffuses light, ensuring even illumination even after extended use. The product is automatically recharged with constant voltage and limited current, and it uses high-temperature type Ni-MH batteries suitable for installation in areas with high temperatures such as above ceiling spaces, walkways, fire escapes, and other areas. The product supports long-distance testing using the infrared remote (Only Series 4 or Special Order), and it automatically self- tests every 30 days and discharges the battery for 30 minutes to help extend its life (Only Series 4).
Product Usage Instructions
- Test the power outlet to ensure it is providing 220 Volts AC electricity. If not, correct the issue before proceeding.
- Install the emergency lighting unit in an area where emergency illumination is required. Perform inspection checks to ensure it is installed correctly to prevent accidents such as the unit coming loose and falling.
- Plug the unit into a power outlet with 220 Volts AC 50Hz electricity.
- Check that the AC LED light is on to indicate that the unit is receiving a 220Vac power supply.
- Verify the CHARGE or FULL LED light to see the status of the battery. The CHARGE LED will be on when the battery is charging, and the FULL LED will be on when the battery is fully charged.
- Check if the TEST switch is working. When pressed, the sign should illuminate, and the AC LED should turn off.
- The ON and OFF switches are used to turn the sign on and off when the emergency exit sign is not plugged in.
- The product should be installed indoor and away from moisture, humidity or direct sunlight.
- The product should be kept within room temperature of around 25-degree Celsius.
- The battery should be immediately charged after each use to prevent a shortened battery life.
- If the unit is not receiving power after being plugged into a power socket, check that the power socket is providing 220 Volts AC power, inspect the 220 Volts AC Fuse, and verify that the unit’s plug has not become loose.
- If the unit and lamp do not illuminate when the power goes out, inspect the unit’s electrical plug, check that the unit’s lamp is secure in its socket, and replace the DC fuse if necessary.
- If the unit’s lamp only turns on for a short duration after the power goes out, it is likely that the unit’s battery is not fully charged.
Features
- Having LED lifetime of over 50,000 hours.
- The sign is made with clear acrylic sheet that evenly diffuses the light throughout the whole sign, even after an extended period of use.
- Automatically recharged with constant voltage and limited current.
- The High-Temperature type Ni-MH (Nikle Metal Hydride) batteries are suited for emergency exit signs that are installed in areas with high temperatures such as above-ceiling spaces, walkways, fire escapes and other areas.
- Support long-distance testing using the infrared remote (Only Series 4 or Special Order).
- Automatically self-test every 30 days and discharge the battery for 30 minutes to help extend the life of the battery (Only Series 4).
Status Indicators and Testing Buttons
Installation and Operation
-
Test the power outlet to make sure it is providing 220 Volts AC electricity. If this is not the case, correct the issue before moving for ward to the next step.
-
Install the emergency lighting unit in an area where emergency illumination is desired. Perform inspection checks to make sure the unit is installed properly to prevent accidents such as the unit coming loose and falling.
-
Plug the unit into a power outlet with 220 Volts AC 50Hz electricity.
-
Check that the “AC” LED light is on to indicate that the unit is receiving a 220Vac power supply.
-
Check the “CHARGE” or “FULL” LED light to see the status of the battery.
The “CHARGE” LED will be on when the battery is charging and the “FULL” LED will be on when the battery is fully charged. -
Check if the TEST switch is working. When pressed the sign should illuminate and the “AC” LED should turn of.
-
The ON and OFF switches are used to turn the sign on and of when the emergency exit sign is not plugged in.
Important Note on Using the Unit
- The unit should be installed indoor and away from moisture, humidity or direct sunlight.
- The unit should be kept within room temperature of around 25 degree Celsius.
- The battery should be immediately charged after each use to prevent a shorten battery life.
Initial Trouble Shooting
| Problem | Cause | What to do |
|---|
– Unit is not receiving power
after being plugged into a power socket. The LED lamp does not illuminate.
| – The power socket might not be providing sufficient power.
– The unit’s plug has become loose.
– The 220 Volts AC fuse is blown
| – Check that the power socket is providing 220 Volts AC power.
– Inspect the 220 Volts AC Fuse
– The unit and lamp does not illuminate when the power goes out
|
– The unit’s lamp is blown out.
– The unit’s lamp is loose from its socket.
|
– Inspect the units electrical plug.
– Replace the DC fuse.
– The unit’s lamp only turns on for a short duration after the power has gone out.
|
– The unit’s battery is not fully charged.
– The unit’s battery might have expired and need to be replaced
|
– Charge the unit’s battery for 12 hours.
– Contact our service department for battery replacement
Installation Types
Terms for Warranty and Service
-
The product will only be under warranty if the customer fills in the “warranty card” and return the “return part” to the company within 7 days of purchasing the product.
If this is not done within the specified time then the warranty will be considered void. -
The warranty only covers the unit’s internal parts for the duration specified by the company counting from the date of purchase.
-
Please show the warranty card every time when contacting our service department or the dealer you purchased the unit from.
-
The warranty will be considered void in the following cases.
- The unit has been used outside of its intended use specified in the manual.
- The unit has been used with equipment that does not meet the specifications specified within the manual.
- The unit has been damaged from impact, for example parts are dented, scratched missing or distorted.
- The unit has been modified or repaired by people not ofcially certified by our company.
- The Sticker Warranty Void has been removed or torn.
- The unit is damaged from negligence or incompetent use, for example, the battery is swollen, the batter has been overcharged, the battery has been damaged from quick charging, the battery has been short-circuited, the battery’s charged has been completely drained.
- The unit has been stored improperly, for example, it was exposed to moisture causing rust and damage to the internal circuitry.
- Damaged was caused by a malfunction in the AC power supply.
- Damage from natural disaster such as fire, moisture, submersion in liquids,chemical damage or from unavoidable circumstances.
- Damage from animals or insects.
Note: Please read the manual carefully before installation and operation to understand how to properly operate the unit.
For any further questions about your product
please feel free to contact SUNNY’s customer service department.
Tel. (+66) 02-948-4450-2
E-mail:
service@sunnyemergencylight.com
IsOn Import-Export Co., Ltd.
2915-2917 Ladprao Road, Klongjan,
Bangkapi, Bangkok 10240
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>