OLIGHT i3T Plus Ancient Bamboo Flashlight User Manual

: June 9, 2024
: OLIGHT

Table of Contents

IN THE BOX
SPECIFICATIONS
TEAR HERE TO TAKE OUT THE PRODUCT AND DEOXIDIZER
INSULATING FILM
AVAILABLE BATTERIES
DANGER
WARNING
EU-DECLARATION OF CONFORMITY
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OLIGHT i3T Plus Ancient Bamboo Flashlight

Thank you for purchasing this Olight Product. Please read this manual carefully before use and keep it for future reference!

IN THE BOX

i3T Plus Ancient Bamboo
AAA Alkaline Batteries (Installed Inside The Flashlight)

SPECIFICATIONS

HIGH 250lumens

LOW 15lumens

All above specifications are test results based on ANSI/NEMA FL1-2009 Standard. The tests are performed using the batteries included in the flashlight.

TEAR HERE TO TAKE OUT THE PRODUCT AND DEOXIDIZER

INSULATING FILM

Before first use, unscrew the tailcap and remove the insulating film.

AVAILABLE BATTERIES

2*1.5V AAA alkaline battery (included)
2*AAA lithium-iron battery (compatible)
2*AAA NiMH battery (compatible)

DANGER

DO NOT shine the light directly into human eyes. This may cause temporary blindness, or permanent damage to the eyes.
DO NOT cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials.

WARNING

Keep out of reach of children.
If the light is about to be put aside for a long time or be transported, please unscrew the tailcap and remove batteries to cut off the circuit.
DO NOT use batteries other than the ones mentioned in the “available batteries”, especially rechargeable lithium batteries, otherwise, it could lead to the damage of the flashlight or even result in unexpected disasters.
DO NOT use rechargeable batteries with a nominal voltage higher than 3.6V. This may cause damage to the product.
DO NOT clean the lens with alcohol or any other chemicals.

When the light is first turned on, it will go to low as the default mode. Soft press without fully clicking for momentary on. Cycle through momentary low and high mode by quickly soft pressing, letting go, and soft pressing again. Deep press for constant on (you will hear a click). Continue to click on and off within 2 seconds after it was turned off to shift between low and high brightness levels. If it is turned on over 2 seconds after it was switched off, it will go directly to low mode as default again.

EU-DECLARATION OF CONFORMITY

WARRANTY

Within 30 days of purchase:
Contact the original seller for repair or replacement.

Within 5 year of purchase:
Contact Olight for repair or replacement.
This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an authorized retailer or Olight itself.

USA Customer Support
cs@olightstore.com
Global Customer Support
customer-service@olightworld.com
Visit www.olightworld.com to see
our complete product line of
portable illumination tools.