ASUS 770A Smartx Bike Lock Height User Manual
- June 9, 2024
- Asus
Table of Contents
770A – Bicycle lock with alarm.
Fitting and operating instructions
770A Smartx Bike Lock Height
Thank you for choosing this ABUS product!
Please read this guide carefully before installation and use. Keep these
instructions and provide all users with instruction on how to use it.
Possible uses
This lock not only deters thieves with mechanical security, but also triggers
a loud alarm as soon as someone tampers with your bicycle if the alarm mode is
activated.
A Bluetooth® -enabled smartphone and the ABUS Smart X app are required in
order to correctly operate the lock.
Only use this lock for bicycles and not for motorbikes, scooters etc.
1.1 Icon explanation
| Symbol | Signal word | Remark |
|---|---|---|
| Warning | Security note indicating a risk of injury or health hazards. |
Failure to observe these warnings can lead to death or seriuos injury.
| Caution| Security note indicating a risk of injury or health hazards.
Failure to observe these warnings can lead to injury.
| Attention| Warning about possible damage to the device. Failure to observe
these warnings can lead to
material damage or malfunctions.
| Notice| Informative note
Safety information regarding the lithium-ion batteries
Please read and observe these safety instructions. Non-observance of these
instructions could lead to fire, injury to persons and/or device damage!
Warning
– This product contains built-in lithium-ion batteries. Built-in batteries
may only be replaced or removed by qualified personnel.
– Batteries must be kept out of reach of children. Children could put
batteries in their mouths and swallow them. This can cause serious harm to
their health. Seek immediate medical attention in this event.
– Keep packaging material away from children! Danger of suffocation!
– Do not use or charge the product in areas with a risk of explosion, e.g. due
to flammable liquids, gases or dust.
– Never burn the product. The battery could explode in the fire.
This would also release toxic substances.
– Only use the USB cable provided and a suitable charging device (5V DC power
supply unit, charging current at least 500 mA) to charge the device. Do not
leave the lock unattended while it is charging!
Caution
– A damaged battery could irritate your airways, skin and eyes. In the event
of contact, immediately rinse the affected area with water and seek medical
attention. The liquid inside the battery is flammable.
Attention
– The battery may only be charged if the lock body housing is not damaged.
If there is visible damage on the lock body such as cracks or holes, the
battery must not be charged.
– Do not use or store the product in areas where the temperature could reach
below -20°C or above +40°C. Do not expose the product to direct sunlight for
long periods of time.
– Never attempt to open the product and remove the battery. This could lead to
damage (battery outgassing, short circuit, etc.)
General safety information
Attention
– Do not use a high-pressure cleaner (IP class 44) or aggressive cleaning
agents to clean the lock.
Only grease the ends of the shackles sparingly and specifically, do not use
oily substances!
– Check the lock for damage at least once a year. If there is visible damage
on the lock body such as cracks or holes, the lock must no longer be used.
1.2 Technical data
Weight approx. 2000 g
Transmission power < 10 mW
Radio frequency 2,402 GHz – 2,480 GHz
Scope of delivery
It is imperative to keep the code card in a safe place.
You need the QR code for the set up, software updates, if you lose your
smartphone, and for proof of ownership for matters related to warranty claims
and repair.
Do not give the card to third parties.
First commissioning
When delivered, the lock is closed and in transport mode* (→ 5.1).
In order to use the lock, the battery must first be fully charged.
Please observe the safety information on pages 20 and 21.
The side of the lock on which the charging socket is located is marked by a small raised point.
Attention
Always remove the cap by hand without using tools (to avoid damaging the
charging socket)!
While charging the device, install the Smart X app (from chapter 4).
Charge the battery to 100% (the charge level of the battery can be displayed
in the app), and the lock will be ready for use.
Attention
After charging, remember to properly close the cap again!
The cap seals the device and protects the electronics from humidity and dirt.
Smart X App
– Download the ABUS Smart X app, install it and follow the instructions in the
app until you have scanned the QR code on the ABUS code card provided.
– It is imperative to keep the code card in a safe place even after completing
the setup. You need the code card for software updates, if you lose your
smartphone, and for proof of ownership for matters related to warranty claims
and repair.
Do not give the card to third parties.
– Bluetooth® must be switched on in your smartphone to operate the lock
electronics. The smartphone must be connected to a network and not be in
flight mode.
While setting up the app, you will be prompted among other things, to actuate
the slide switch.
Hold the slide switch in the pushed position until the signal tone (=
confirmation tone) sounds.
Operating the lock
Signal tones
| Downward sound sequence Lock is opened
---|---
| 2 deep
tones
Transport mode (>5.1) activated
| Pre-alarm
| Upward sound sequence Lock is closed
| 2 high tones
Monitoring mode
(> 5.1) activated
| Alarm
5.1 Transport mode / monitoring mode
In transport mode, the lock only provides mechanical security.
It does not communicate or search for the authorised smartphone. Moving the
lock will not trigger the alarm.
In monitoring mode, the lock additionally provides electronic monitoring for
shock/movement and triggers a loud alarm upon detection.
When delivered, and automatically after locking the lock, transport mode will
be activated.
5.2 Opening the lock
- Smartphone with functioning SmartX app in range (approx. 2-5 m)
- Actuate (and hold) the slide switch
- Lock automatically unlocks, confirmed by tone sequence
- Remove the shackle (within 10 seconds)
If, while in transport mode, there is no authorised smartphone in the vicinity
or the Bluetooth® function is deactivated when the slide switch is activated,
the lock remains closed.
In monitoring mode, this event would trigger the alarm when movement occurs.
5.3 Closing the lock
- Insert the shackle into the lock body
- Lock automatically closes, confirmed by tone sequence
- Transport mode is activated after 5 seconds, confirmed through a signal tone (deep tones)
- In order to activate monitoring mode, the slide switch must be actuated (and held) within 5 seconds of inserting the shackle, confirmed with a signal tone (high tones)
5.4 Alarm triggering
If lock movement is detected in monitoring mode and the authorised smartphone
is not in range, a pre-alarm will sound.
If strong movement is still detected afterwards, the main alarm will trigger
(15-second duration). The process repeats if movement continues.
Mounting the bracket ABUS USKF
Select a suitable location to mount the bracket on your bicycle.
Attention
Danger of material damage due to falling out
The lock can fall out of the holder and be damaged if the bracket is not
mounted correctly.
- Mount the bracket on your bicycle so that the opening for inserting the lock is facing upwards.
Please ensure that the lock is able to fit in smoothly, particularly within the frame triangle. Installation and operation instructions USKF.
Warning
Danger to life by falling out during transport by car or trailer If the
lock is in the bracket when transporting your bicylce with a car or trailer,
it can fall out and injure or kill other road users.
- Always remove the lock from the bracket during this transport.
Charging the battery
You can view the battery charge status on the Smart X app. Charge your lock as
soon as the app prompts you to do so.
If the battery is depleted, the lock will still provide mechanical security,
but you will be unable to open and close it!
Charge the battery even before a longer period of non-use of the lock (e.g.
winter break).
Charging process → 3.1–3.4 under consideration of the safety information on
pages 20 and 21.
Legal information
EU Declaration of Conformity
Hereby, ABUS August Bremicker Söhne KG declares that the radio equipment type
770A is in compliance with Directives 2014/53/EU and 2011/65/EU.
The full text of the EU declaration of conformity is available at the
following internet address: docs.abus.com
UK Declaration of Conformity
Hereby, ABUS August Bremicker Söhne KG declares that the radio equipment type
770A is in compliance with the Radio Equipment Regulations 2017 and the
Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012. The full text of the UK declaration of
conformity is available at the following internet address:
docs.abus.com
Disposal
It is your responsibility to delete all stored personal data prior to disposal
of the product. This product contains valuable raw materials.
At the end of its service life, dispose of the product in accordance with the
applicable legal requirements. Electrical appliances, rechargeable batteries
and batteries must not be disposed of with household waste. Disposal must be
carried out in accordance with Directive 2012/19/EU on waste electrical and
electronic equipment (WEEE), or Directive 2006/66/EC on batteries and
accumulators and waste batteries and accumulators.
Batteries must be removed from electrical appliances and disposed of
separately before disposal.
Dispose of the packaging according to type.
Separate the cardboard, foil and plastic elements for recycling.
Please contact the local authority responsible for disposal if you have any
queries.
You can obtain information on collection points for your old appliances, for
example, from the local municipal or city administration, the local waste
disposal companies, or your specialist dealer.
**** WEEE-Reg.-Nr. DE79663011
Licence texts
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by ABUS August Bremicker Söhne
KG is under license. Other trademarks and brand names are those of their
respective owners.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S.
and other countries and regions. App Store is a service mark of Apple Inc.
Google Play and the Google Play logo are trademarks of Google LLC.
Warranty
ABUS products are designed, manufactured and tested in accordance with
applicable regulations with great care. The warranty exclusively covers faults
that are caused by material or manufacturing defects. If a material or
manufacturing defect can be proven, the product will be repaired or replaced
at
the discretion of the warrantor. In such cases, the warranty ends with the
termination of the original warranty period. Any further claims are expressly
excluded.
ABUS assumes no liability for defects or damage that has been caused by
external influences (e.g. transport, external forces), improper use, normal
wear and tear or non-compliance with this operating and installation
instructions document. If a warranty claim is asserted, the product must be
returned with
the original receipt with date of purchase and a brief written description of
the fault.
Subject to technical alterations. No liability for mistakes and printing
errors.
Information regarding FCC certification for USA
Contains Transmitter Module FCC ID: 2ADHKBZR
It is not permitted to make any changes or modifications to this device.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Supplier‘s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier: 770A SmartX™
Responsible Party – U.S. Contact Information
ABUS Mobile Security, Inc.
1765 N. Elston Avenue – Suite 204
Chicago, IL 60642
Phone: 312-640-1111
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
I nformation regarding ICES certification for Canada
Contains IC: 20266-SAMB11ZR
CAN ICES-003 (B)
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
© ABUS
2022
ABUS August Bremicker Söhne KG | D 58292 Wetter | Germany.
Tel.: +49 (0) 23 35 63 40
T390604 | V4 | A22