Hornady LOCK-N-LOAD Case Prep Trio Gunsmithing Tool Instructions
- June 9, 2024
- Hornady
Table of Contents
Hornady LOCK-N-LOAD Case Prep Trio Gunsmithing Tool
Introduction
The Lock-N-Load® Case Prep Trio makes case preparation faster and easier than ever. Included are chamfer and deburr tools, with plenty of onboard storage for optional case prep accessories like our primer pocket cleaners, case neck brushes, and many other 8-32 threaded tools.
WARNING
Before operating the unit please carefully read and understand the instructions.
Contact Hornady Customer Service at 1-800-338-3220 with question regarding the use of the Lock-N-Load® Case Prep Trio.
- Do not use in wet location.
- Only use the included power supply.
- Do not wear loose clothing when operating.
- Tie back long hair when operating.
- Chamfer tools are very sharp. Use caution when operating or removing tools.
SPECIFICATIONS
Item No. 050160
Power: 12V DC 1A
Output Shafts: 8-32 thread
WARRANTY
All Hornady® reloading tools and accessories are warranted against material defects and workmanship.
Hornady® electronic components are covered by a one-year warranty from the date of purchase.
This warranty is void if the product (1) has been damaged by accident or unreasonable use, neglect, improper service or other causes not arising out of defects in material or workmanship; or (2) has been altered or repairs have been made or attempted by other than authorized factory personnel; (3) is used commercially; or (4) has been altered or defaced in any way.
This warranty supersedes all other warranties for Hornady® products either written or oral. No other warranty is expressed or implied.
PRODUCT REGISTRATION AND SERVICE
You must register your product to obtain Warranty Service.
Complete the registration form at
hornady.com/warranties.
Scan to register your product to receive the full benefit of its warranty.
TO RECEIVE WARRANTY SERVICE
To report a warranty claim, call Hornady® at 800-338-3220 to request a return authorization number. Returns will not be accepted without prior return authorization by Hornady.®
POST-WARRANTY SERVICE INFORMATION
For issues concerning service after the Limited Warranty expires, contact Hornady® at 800-338-3220.
PRODUCT SERIAL NUMBER AND REFERENCE INFORMATION
You must register your product in order to obtain warranty service. In the event you should need service for your product, please note the following information:
Serial __
Number____
Date __
Purchased___
Retailer ____
Customer Service
Hornady Manufacturing Company
P.O. Box 1848, Grand Island, NE 68802-1848
hornady.com/contact
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>