KINESIS DXT3 Right and Left Handed Wireless Ergonomic Mouse User Manual

KINESIS DXT3 Right and Left Handed Wireless Ergonomic Mouse

Product Information

• Wireless: The product is wireless and does not require a wired connection.
• Buttons: The product has six buttons – Left click, Right click, Scroll Wheel, Button 4 (Right/Left-handed out of the box), Button 5 (Back button out of the box), and Button 6 (Forward button out of the box).
• DPI/CPI Button: The product has a DPI/CPI button that allows the user to switch between different sensitivity levels.
• USB Dongle: The product comes with a USB dongle that needs to be plugged into the computer for the product to work wirelessly.
• USB Dongle Storage: The product has a storage compartment for the USB dongle when not in use.
• Sensor: The product has a sensor that tracks its movement and translates it onto the computer screen.
• PTFE Feet: The product has PTFE feet that provide smooth movement on surfaces.
• On/Off button: The product has an On/Off button that allows the user to turn it off when not in use, conserving battery life.

Product Usage Instructions

1. Insert the USB dongle into the computer’s USB port.

2. Press the On/Off button to turn on the product.

3. Use the Left click and Right click buttons to perform their respective functions.

4. Scroll the Scroll Wheel up or down to navigate through documents or web pages.

5. Press Button 4 (Right/Left-handed out of the box) to switch between left and right-handed mode.

6. Press Button 5 (Back button out of the box) to go back to the previous page in a web browser or file explorer.

7. Press Button 6 (Forward button out of the box) to go forward to
   the next page in a web browser or file explorer.

8. Press the DPI/CPI button to switch between different sensitivity levels based on your preference.

9. Use the product on a flat surface for best results.

10. When not in use, press the On/Off button to turn off the product and store the USB dongle in the storage compartment for safekeeping.

Welcome to DXT Mouse 3
Your new ergonomic mouse is the result of our unyielding pursuit of perfection for over 12 years. We poured our hearts into creating the best
possible Ergonomic moOuse to promote comfort and accuracy.
The DXT Mouse 3 is designed to allow your hand to adopt the position of rest.
The position of rest helps prevent/recover from discomfort/injury while also allowing for accurate Cursor movements.
www.dxtmouse.com

Package contents

DXT Wireless Mouse 3

1. DXT Mouse 3
2. USB Dongle
3. USB C charging cable

Product Overview

DXT Mouse 3 Engine

Download DXT Mouse 3 Engine at www.dxtmouse.com/engine
DXT Mouse engine requirements = Windows only

Setup
Go to www.dxtmouse.com/videos for more information or scan QR Code

Holding the DXT Mouse 3
Go to www.dxtmouse.com/videos for videos showing the DXT Mouse 3 in use or scan QR code

Key Features

Go to www.dxtmouse.com/videos for videos showing key features or scan QR code

FAQS

Go to www.dxtmouse.com/faqs for information covering FAQs.

Important health information
Use of a keyboard or mouse may be linked to serious injuries or disorders. When using a computer, as with many activities, you may experience occasional discomfort in your hands, arms shoulders, neck, or other parts of your body. If you experience any physical discomfort, yoOu should secure advice from a qualified health professional. For more information on healthy computer use go to www.dxtmouse.com/support

Warranty information

Valid warranty claims are generally processed through the point of purchase during the first 30 days after purchase: however, this period of time may vary depending on where you purchased the product-please check with City Ergonomics or the retailer where you purchased the product for details. Warranty claims any other product related questions should be addressed directly to city Ergonomics via our contact us page

2 year limited warranty
City Ergonomics warrants to the original purchaser that this product (and the products name) is free from material and workmanship defects when used under normal conditions for a period of one (2) year from the date of purchase. Should the product contain defects in material or workmanship City ErgonomicS will repair or replace the product at our option. Purchaser will be responsible for al costs associated with packing and shipping the product to City Ergonomics and all other freignt or insurance costs associated witn tne return. City trgonomics Will bear the cost of shipping the repaired or replaced product to the purchaser. Product should be returned in its original package accompanied by a proof of purchase, either a sales receipt or other proof that the product is within the warranty period. This warranty is void if the owner repairs or modifies the product or the product has been damaged as a result of misuse. This warranty excludes any liability other than that expressly stated previously, including but not limited to, any incidental or inconsequential damages.

Limitation of Liability
City Ergonomics shall not be responsible for any special, indirect, incidental, or consequential damages whatsoever, including but not limited to loss of profits, revenue or data (whether direct or indirect) or commercial loss for breach of any express or implied warranty on your product even if City Ergonomics has been advised of the pOssibility of such damages.

Europe-EU Declaration of Conformity

Hereby, City Ergonomics Limited declares that the equipment which is compliance with directive RoHS 2.0 (IEC 62321-3-1:2013/ IEC 62321-4:2013+AMDI:2017/ EC 62321-5:2013/ IEC 62321-6:2015/ 1EC 62321-7-1:2015 / IEC 62321-7-2:2017 / IEC 62321- 8:2017), R.E. D (EN 62479:2010 / EN IEC 62368-1:2020+A11:2020/ ETSI EN 301489-1 V2.2.3(2019-11) / ETSI EN 301489-3 V2.1.1(2019-03) / ETSI EN 300440 V2.2.1(2018-07), EMC Directive (EN 55032:2015+A11:2020 / EN TEC 61000-3-2:2019+Al:2021/ EN 61000-3-3:2013+A2:2021 / EN 55035:2017+A11:2020), and LVD (EN IEC 62368-1:2020+A11:2020) which are issued by the Commission of the European Community.
The full text of the EU declaration of conformity is available at the following internet address: https://dxtmouse.com/ City Ergonomics Limited hereby confirms, to date, based on the feed back from our suppliers indicates that our products shipping to the EU territory comply with REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals (EC) 1907/2006) compliance program. We are fully committed to offering REACH compliance on the products and posting accurate REACH compliance status for the all of products.

WEEE
This product must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.

Safety Guideline for Lithium Battery
This battery must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product
“CAUTION” Risk of explosion if battery pack is not replaced by same type as specified by the manufacturer.
Please keep tollow all isted important warnings and cautions below while using this battery pack to avoId any damage or hazard.

1. The battery polarity (+) and (-) shall not be connected and charged reversely. Risk of explosion if the battery polarity (+) and (-)is reversed.
2. Please keep this battery pack away from fire and high heat sources due to explosion might happen. Do not place your battery pack close to any heater or hot location.
3. This battery pack shall not be hit or impacted. This battery pack shall not be dealt with any sharp or keen objects either.
4. This battery pack shall not be exposed to moisture, dripping or splashing.
5. If any electrolyte flow out of this battery pack when touch the users eyes and skin, please seek medical advice immediately.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and tound to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED Canada Statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence exempt RSS[s). Operation is subject to the following two conditions:

1. this device may not cause interference and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment
To maintain compliance with IC’s RF Exposure guidelincs, This cquipment should be.installed and operated with minimum distance of Smm the radiator
your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter

Contact information
2022 City Ergonomics Limited.
All Rights Reserved.
www.dxtmouse.com/contact

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>