ROCONIA Q8 Series WiFi Bluetooth HD Projector User Manual

ROCONIA Q8 Series WiFi Bluetooth HD Projector

Product Information

The Q5/Q6/Q8 models are projectors produced by ROCONIA. They are designed for home and small office use. The projectors support HDMI and Airplay connectivity for video input. The device has a built-in keystone function to adjust the image if it’s wider at the top/bottom of the screen. The projector also has a static screen that is prone to dust accumulation. The device has an exhaust fan to cool the device and avoid overheating issues. If the lamp (bulb) switches off after a period of time, the device may have some blockages in the ventilation vents.

Product Usage Instructions

Before using the projector, remove the lens cover. If you encounter any problems while using the device, please contact the ROCONIA customer team by email (roconia@hotmail.com) or phone (02 03 03 04 04 05 07 08 09 10 14 15 17 18 21 24 26 28 29 30 31 32 32 01).

Problem: No Image, a Projected Image, or a No Signal Message is Displayed

1. Leave the projector to cool for a few moments
2. Once cooled, check if anything is blocking the ventilation vents
3. Turn on the projector. If the issue persists, please contact your support provider for further assistance.

Problem: The Image is Wider at the Top/Bottom of the Screen (Keystone)
Use the projector’s built-in keystone function to adjust the image and make it perpendicular to the screen.

Problem: Stains on the Screen

1. Turn off the projector
2. Gently vibrate or shake the projector to remove dust
3. Use a vacuum cleaner to absorb the inside of the projector and suck the dust from the screen

Problem: The Image Brightness Has Faded
If the ambient light in the room is not causing the issue, the lamp (bulb) may need replacement.

Problem: There is No Sound

1. When playing video from a laptop via an HDMI cable, make sure that the Bluetooth receiver status on the Bluetooth setting page is not selected. Press the setting button-Bluetooth-Press ok-Choose Bluetooth ON/OFF
2. When using Airplay/ScreenMirroring function wirelessly, ensure the Bluetooth receiver status on the Bluetooth setting page is not selected. Press the setting button-Bluetooth-Press ok-Choose Bluetooth ON/OFF

If you require additional guidance, ROCONIA provides instructional videos that are simple to follow. Please contact their service team via email (roconia@hotmail.com).

IC Caution
The device complies with Industry Canada license-exempt RSS Standard(s). The operation is subject to the following two conditions:

1. The device may not cause interference
2. The device must accept any interference, including interference that may cause undesired operation.

To maintain compliance with RSS-102 RF Exposure guidelines, this equipment should be installed and operated with a minimum 20cm distance between the radiator and your body. Use only the supplied antenna.

ROCONIA Customer Team guarantees every customer the best services and the best of your experience with us, any problem, please feel free to contact us by email
at roconia@hotmaii.com.

Troubleshooting

Before resorting the maintenance service, please check by yourself with the following chart

No Image, s Proiected

or a “No Signal” message is displayed

| 1.  Is the power high? If, tis not on, check the projector,s plugged into the m, an n s, that the socket is switched on, and then press the power button on the projector

2.  Check the lens cover has been removed

3.  Check the cables are secu「ely attached and installed as per the User Manual

4.  The image source may not be set correctly. Press the Source button on the Control Panel or the Remote, to select the correct setting

5.  Check in the Menu section under Video input signal to make sure that has been set correctly

---|---

The Lamp (Bulb) switches off after a period of time

| 1 L eave the projector to cool for a few moments

2.0nce cooled, check if anything is blocking the ventilation vents 3.Tu In on the project

If the issue persists please contact you support to provide for further assistance

The Image is wider at the top/bottom of the screen

| This is called a keystone and is due to the projection angle not being perpendicular to the screen. To correct use the projector’s inbuilt keystone function to adjust the image
Stains on the screen| The screen of the running projector is static, so it is easy to adsorb dust. Please turn off the projector,

1. Gently vibrate or shake the p「ojecto「 to remove dust

2. In the air outlet of the projector, use the vacuum cleaner to absorb the inside of the projector, and suck the dust from the screen

The image brightness has faded| This could possibly be caused by the ambient light in the room If not, the chances are that you need to replace the lamp (bulb)
There 1s no sound| 1 When playing video from a laptop via an HDMI cable
2. When using Airplay/ScreenMirroring function wirelessly Please make sure that you do not choose Bluetooth Receiver status on the Bluetooth Setting page

Steps: Press the setting button-Bluetooth-Press ok-Choose Bluetooth ON/OFF

We have prepared a lot of instructional videos, and the operation is very simple, if you have any questions, please contact our service team by email: roconia@hotmail.com.

Important Satety Instructions

1. Read these instructions
2. Keep these Instructions
3. Heed all Warnings
4. Follow all instructions
5. Do not use this apparatus near water
6. Clean only with a dry cloth
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat
9. Protect the power cold from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus
10. Only use attachments/accessories specified by the manufacturer
11. Unplug this apparatus during lightning storms or when unused for long periods of time
12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain moisture and does not operate normally, or has been dropped
13. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over

Additional Warnings and Precautions

1. Do not look directly into the projector light
2. Don’t touch the projector lens
3. The mains adapter is used as a disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely the mains plug should be disconnected from the mains socket outlet completely
4. CAUTION: Use of controls adjustments or performance of procedures other than those specified may result in hazardous radiation exposure
5. WARNING: Changes or modified to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
6. WARNING: Use of this unit near fluorescent lighting may cause interference regarding the use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause
7. WARNING: Shock hazard-do Not Open
8. Caution and marking information is located at the rear or bottom of the apparatus
9. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing
10. Objects filled with liquids, such as vases, shall not be placed on the apparatus.

FCC STATEMENT WARNING

This device complies with Part 15 of the FCC rules

Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help

IC Caution

This device complies with Industry Canada license-exempt RSS Standard(s).

Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation.

To maintain compliance with RSS-102 RF Exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Accessory List

• 1 X Projector
• 1 X Lens Cover
• 1 × Power Cord
• 1 X HDMI Cable
• 1 XAV Cable
• 1 X Remote Control

Remove the lens cover before using

Close the lens cover when unit not using

The projector can be installed four different configurations (see picture below) Press the Setting button .. Enter the “PICTURE” option .. Select the “Projection Direction Front/Rear/Front Ce1l1ng/Rear Ceiling

Front Table:
Select this location with the projector placed near the floor in front of the screen. This 1s the most common way to position the projector for quick setup and portability.

Front Ceiling:
Select this location with the projector suspended upside-down from the ceiling in front of the screen NOTE: A projector mount is required to install the projector in a ceiling

Rear Table:
Select this location with the projector placed near the floor behind the screen.

NOTE: A special rear projection screen is required

Rear Ceiling:
Select this location with the projector suspended upside-down from the ceiling behind the screen NOTE: A prorector mount is required to install the projector in a ceiling A special rear projection screen is required.

Projector installation

It is recommended to move the projector as close to the center of the screen

Measure the distance between the Projector and where you want to position the screen This 1s the projection distance.

When 1nstall1ng the projector,n the ceiling, please purchase a projector mount recommended by an installation professional and follow the instructions that come with the mount. Before installing the projector, please check to make sure the ceiling structure can support the weight of the projector and the mount. If in doubt, please ask the advice from an installation professorial

NOTE: Projector mount and screw(s) not included.

Adjust the Focus and Keystone

Follow the below picture to adjust the vertical location

Follow the below picture to adjust the focus and trapezoidal screen

• Adjust the focus by turning the knob while observing the image pixels near the center of the screen. Optimal focus is obtained when the pixels are clearly visible. Depending on the
  projected screen size, the focus near the screen edges may be less sharp than the screen center.

• Keystone image 1s created when the projector beam is projected to the screen at an angle Keystone correction will restore the distorted image to a rectangular or square shape

Remote Control

1. PowerOn/Off
2. Mute
3. Source
4. SoundBar Function 5 Setup
5. Arrow Keys
6. Home
7. Menu
8. Exit 10Volume Key

Caution:

• Do not submerge the remote control in water
• Do not put the remote control near a fire or in hot places
• Do not use old and new batteries together in the remote control
• Please take the batteries out if not using the remote control for a long time to avoid battery leakage
• Please point the remote control at the IR receiver

Functional Overview

Connecting the projector to power

A. Connect the power cable to the projector.

B. The projector will display an indicator light when connected to power.

Power ON/OFF
Press the “   “button on the projector or on the remote control to power on.

Multimedia bootscreen
After 10-20 seconds, the multimedia screen will be displayed

Focus & keystone correction

• A. If the image is displayed as a trapezoid shape, you can adjust it with the keystone correction function by pressing button 3, this should normalize the display image
• B. image focusing: Make sure the projector is horizontal to the projector screen and adjust the focus by pressing button 2, you can display video or the menu screen to check the adjustment.

Optical Adjustments

The projector uses an optical keystone correction function, so the image can be adjusted as.

However, this projector does not have a horizontal keystone correction function The projector must be placed horizontally to the projection screen. If you encounter the problem as shown above, It is probably because the projector has not been placed horizontally to the projection screen, or the projection screen is not vertically positioned
Solution: Adjust the projector’s position so that it is horizontal to the screen.

Connect multiple devices and applications

Menu Setting

1. Remote control user guide
   Press the Key to enter the main menu, then press “ ” to enter each sub-menu.
   Press “ ” to select the sub-menu, then adjust the parameters as required, and press the “OK” key to confirm.

2. The function of sub-menus.
   Bluetooth On/Bluetooth Off/Bluetooth Receiver

Function Sub-menus
Bluetooth on/Bluetooth Off/Bluetooth Receiver

Picture Sub-menus
Picture Mode/Color Temperat /Aspect Ratio/Noise Reduction/Screen/Projector Direc/HDMI Mode

Sound sub-menus
Sound Mode/Balance/Auto Volume/Volume

Option Sub-menus:
DSD Language/Restore Factory/Blending/Osd Duration/Blue Screen/ Sleep Timer/Software Update

Multi-screen interactive connection for mobile and projector

First, ensure the projector and the phone is connected to the same wireless network. Following the below steps.

Setup WiFi network

1. Press the button to turn on the unit and the power indicator will light GREEN.
2. Press the home button , use the buttons to select the Wireless Screen Mirroring, and press the button to enter screen mirroring for iOS/Android system.
3. Press the button to enter Wi-Fisetting.
4. Choose “search” and press the button to search available WiFi.
5. Select your home Wi-Fi and input your password (using buttons to input the password ) then press “Enter” to connect.
6. After connecting, press the exit button twice to return to the “Screen Mirroring for Android/iOS System” page.
7. Turn on your phone wifi to search and select the same home WiFi router and input the password to connect.
8. 5150-5250MHz indoor use only.

Note:

1. When the projector is on the “waiting for projection” page, you can press “OK” to enter the WiFi setting, and press “ ” to return home page.
2. Note: No matter whether the projector is connected to a 5GHZ or 2.4GHZ network, the phone must be connected to the same WIFI as the projector.

Wireless connection to Smartphone/Tablet

Wireless connection to Smartphone/Tablet

Connection guide| Wireless Connection| 10S (Two Methods)| WithWiF,
Without W们
Android (Two Methods)| WithWiF1
Without WiF1
Wired Connection| 10S(One Method)| USB/SM to Lightning Cable
Android(One Method)| USB/SM to Micro USB/Type C Cable (Need to Download the APP)
Please check your wireless environment first and then connect your device in the correct way by the below introduction

wireless connection

10S screen

1. Airplay Function
   Method: Wireless connection with Wi-Fi router

   • Connect the same Wifi network as the previous Setup WiFi network section for the projector and mobile device (Page 17). After connecting, press the exit button twice to return “waiting for projection” page
   • Open the App and Select the video/movie on your phone
   • Click Projection Screen “ ” and connect with the projector device Roconia-XXX XXX are numbers and letters. It shows on the projector screen
     Note: No matter whether the projector is connected to a 5GHZ or 2.4GHZ network, the phone must be connected to the same WIFI as the projector

2. Screen Mirroring Function (1)Wireless connection with Wi-Fi router

   • Connect the same Wifi network as the previous Setup W network section for the projector and mobile device, and stay on the “wang for projection” page
   • Swipe up from the bottom of your phone, and click screen mirroring
   • Connect with projector device Roconia-XXX
     Note: No matter whether the projector is connected to a 5GHZ or 2.4GHZ network, the phone must be connected to the same WIFI as the projector.

3. Wireless connection without Wi-Fi router

   • Make sure the projector disconnects from any Wifi
     Note:lf the projector has been connected to Wi-Fi, you can enter Wifi setting and select “Forget” Wifi

   • Press the home button and Choose Wireless Mirroring Screen to enter the “waiting for projection ” page

   • Turn on the Wifi on your 10S device to Search the WLAN

   • Input the PIN (12345678) to connect with the projector device Roconia-XXX

   • Swipe up from the bottom of your phone, and click screen mirroring

   • Connect with projector device Roconia-XXX

Android screen

1. Airplay/DLAN Function
   Method: Wireless connection with Wi-Fi router

   • Connect the same wifi network as the previous Setup WiFi network section for the projector and mobile device.
   • After connecting, press the exit button twice to return “waiting for projection” page
   • Open the App and Select the video/ movie on your phone
   • Click Projection Screen and connect with projector device Roconia-XXX
     Note: No matter whether the proejctor is connected to a 5GHZ or 2.4GHZ network, the phone must be connected to the same WIFI as the projector.

2. Screen Mirroring Function

3. Wireless connection with Wi-Fi router

4. Connect the same Wifi network as the previous Setup Wifi network section for projector and mobile device, stay on the “waiting for projection” page

5. Swipe up from the bottom of your phone, and click screen mirroring. (different mobile models with different names, for example, Multi-screen, Wireless Display, Screen Mirroring, Smart View, etc… ).

6. Connect with projector device Roconia-XXX.
   Note: No matter whether the projector is connected to a 5GHZ or 2.4GHZ network, the phone must be connected to the same WIFI as the projector.

7. Wireless connection without Wi-Fi router

8. Turn on the Wifi on your phone and do not connect any Wifi

9. Enter the control center and open “Multi-screen”

10. Search and connect the prorector device Roconia-XXX

Note: When using Airplay/Screen Mirroring function wirelessly, please make sure that you do not choose Bluetooth Receiver status on the Bluetooth Setting page

Wired connection
Press the home button fu’, and use the buttons to select the Wired Screen Mirroring and press the button to enter.

10S Screen Mirroring Function

1. Make Sure to use the original Lightning cable
2. Use the Lightning cable to connect iPhone to USB/SM interface
3. For the first time, your 10S device will pop up a trust prompt
4. Click “Trust” on your phone

Note:
Do not turn off screen m1rronng on your iPhone, otherwise, you need to restart your iPhone to use this function If you want to stop the mirroring function, please unplug the lightning cable directly.

Android Screen Mirroring Function

Press the home button , the buttons to select the Wired Screen Mirroring, and press the button to enter.

1. Make sure to use the original data cable
2. Use a USB to Micro/Type-C cable to connect your Phone to the USB/SM interface
3. Choose USB Transfer Method(Transferfiles) and download the app “ByteFly mirror” according to the prompts
4. Press the menu button “ ” on the projector to enter the Bluetooth setting, then select Bluetooth and press select “Bluetooth receiver”
5. Enter the Bluetooth setting on your phone and turn on Bluetooth, then you can find the name ” Roconia-BT ” of the projector Bluetooth and connect

Remind:

1. Some phones are not compatible and cannot use this function on
2. When connecting the Android phone and the projector with the original data cable, please be sure to select the Bluetooth receiver” status, otherwise, there will be no sound
3. Please switch Bluetooth to an “on/off ‘ state after use, do not stay in Bluetooth “receiver state, otherwise, there will be no sound when using other functions

If you have any questions, please contact us via the after-sale email:
roconia@hotmail.com

Bluetooth Function
Press the “ “Key to enter the main menu, then press to enter.

Bluetooth Sub-menus

Bluetooth On

1. Open the Bluetooth function of your Bluetooth devices
2. Press” .,./ ” to choose Bluetooth and the projector will begin searching for Bluetooth devices, the Bluetooth devices will be shown on the screen
3. Select it and you can connect the projector to your Bluetooth devices

Bluetooth Off

Bluetooth Receiver

1. Select Bluetooth Receive
2. Enter the Bluetooth setting on your phone and turn on Bluetooth, then you can find the name ” Roconia-BT ” of projector Bluetooth.
3. Connect the projector Bluetooth ” Roconia-BT ” and you can use it as an independent speaker

NOTE:

1. Bluetooth is OFF by default when the prorector first powers ON, and it can be turned ON or OFF from the Bluetoothsub-menu

2. Power on the projector and open the projector Bluetooth,the projector will begin searching for nearby Bluetooth devices to connect to, the Bluetooth devices will be shown on the screen, select and press the OK key to connect it

3. When successfully paired, the Bluetooth receiver should indicate it 1s
   connected, usually with a chime or other audible noise. Check the user manual on your Bluetooth receiver for more information

4. When successfully connected, the projector will display the Bluetooth receiver’s name on the top right portion of the Main Menu screen, and sound played from the projector will be heard through the Bluetooth receiver

5. After the initial pairing, the projector and the Bluetooth speakers will keep the pairing status all the time when Bluetooth functions for both devices are opened.

6. To ensure that you can hear the sound clearly when playing a video next time, we suggest that you turn off the Bluetooth function before you are ready to turn off the projector each time. Otherwise, the projector will automatically connect to your previous Bluetooth device and may lead to no sound emitted from the projector.

7. When you try to connect a new Bluetooth speaker, please turn off the previous speaker headphone and research your new Bluetooth device for connecting

8. Please switch Bluetooth to the “on/off “state after use, do not stay in Bluetooth “receiver” state, otherwise, there will be sound when using other functions. (Press setting button–Bluetooth–Press”OK”–Choose Bluetooth ON/OFF)

If there is no sound with the Bluetooth speaker, please follow the steps below to troubleshoot

1. Make sure the mute button is turned off

2. Check if the Bluetooth is turned on correctly. When you turn on the projector’s Bluetooth and Bluetooth speakers, they will automatically connect. If the Bluetooth
   speaker emits a “beep” sound, the connection is complete

3. Use the HDMI cable in the package to connect to your computer and play music to test

4. If you find that a movie cannot play sounds, please try another movie. Since the projector does not support Dolby Sound, the movie with Dolby Sound cannot play the sound. You can check if the movie’s audio number is “ac3” (Dolby Sound)

5. Turn off Dolby Digital on your device (Settings> Display and Sound> Audio> Dolby Digital Out>, and then choose another Sound effect)

6. A few types of Bluetooth speakers are not compatible with the projector’s Bluetooth, please try other Bluetooth speakers to see if it works We have prepared many Instructive videos so you can learn how to operate them visually. If you need it please let us know

Playing media from a USB
Insert the U Disk into the USB slot or use USB to Micro/Type-C cable to connect your Phone with USB/SM.

Press the home button “ ” and choose USB mode.

Supported multimedia formats

Choose the content which you need to display:
Movie/Music/Photo/Text

Choose the file you want to display. Press “ ” to display or stop.

HDMI connection
Use the HDMI slot to connect computers and HDMI-compatible devices. Once connected, select the HDMI mode to enter

Supported resolutions
576P.480P,720P,1080P,640X600,800X746,1280X1024,1280X720,1440X900, 1366X768,1920X1080,1280X800,1440X960,680X1050

Note:
When playing video from a laptop via an HDMI cable, please make sure that you do not choose Bluetooth “Receiver “status on the Bluetooth Setting page Steps: Press the Setting button –BLUETOOTH–press ok–choose Bluetooth On/Off

AV video connection
Use a 3-in-1 AV cable to connect the projector as shown below. Once connected, Select the AV mode to enter.

3.5mm audio connection
Use the 3.5mm audio jack to connect headphones and speaker equipment.

Note: This projector does not support Dolby Sound.

VGA Connection
Follow the below picture to connect the VGA cable and device

1. Turn off the unit before connecting the VGA cable
2. Press the button to turn off the power of your projector before the connection
3. After connecting, press the button to turn on the unit and the power indicator will light green.
4. press the direction button to VGA mode in the home menu and the video on the VGA device will be displayed on the projector screen

Please refer to the following table to adjust the output signal from the computer

Specification

USB Port

| Support USB device up to 64GB

Support format MPEG1. MPEG2 .MPEG4. MP3. JPEG

Weight|  | 1.4KG
D1mens1on|  | 235x 168x 83 mm
Bluetooth|  | Version 5.0

Ideal for dark viewing environments for optimal performance

Warranty

We are committed to improving the quality of service. It would be highly appreciated if you could make suggestions for us about our products in our store, which will be a great encouragement for us.

If you have any questions about the assembly of the product, accessories, the quality of the product or etc, please contact us via email: roconia@hotmail.com.

We will do our best to solve the problem. Thank you.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>