newcential SP-107 Childrena Bicycle Helmet Owner’s Manual

: June 9, 2024
: newcential

newcential SP-107 Childrena Bicycle Helmet Owner

newcential-SP-107-Childrena-Bicycle-Helmet-Owner-PRODACT-
IMG

Kinder-Fahrradhelm SP-107/ Children’s Bicycle Helmet

The Kinder-Fahrradhelm SP-107/ Children’s Bicycle Helmet is a high-quality helmet that is manufactured and certified in strict adherence to the currently valid safety standards. It comes with an LED-rear light SP-09 for added visibility and safety while riding. The helmet is designed to provide maximum protection and comfort to children while riding their bicycles.

Safety Information

Before using the helmet, it is important to read and understand the safety information provided in the user manual. Here are some key safety features of the helmet:

The helmet is designed to provide protection against head injuries in case of an accident.
The helmet should be worn snugly on the head, with the chin strap securely fastened.
The helmet should be replaced after any impact, even if there are no visible signs of damage.
The helmet should not be modified or altered in any way.

Product Usage Instructions

Follow these instructions for proper use of the Kinder-Fahrradhelm SP-107/ Children’s Bicycle Helmet:

The correct helmet position

The helmet should be worn horizontally on the head, covering the forehead and extending down to the back of the head. The side straps should be adjusted so they form a V-shape just below the earlobes. The chin strap should be tightened so that it is snug underneath the chin.

Adjusting the single-hand twisting fastener

The single-hand twisting fastener is used to adjust the tightness of the helmet. It is located at the back of the helmet and can be tightened or loosened with one hand. Adjust the fastener until the helmet fits snugly on the head.

Adjusting the strap divider

The strap divider is used to adjust the position of the side straps. It should be adjusted so that the straps form a V-shape just below the earlobes.

Adjusting the chin strap

The chin strap should be tightened so that it is snug underneath the chin. The excess strap should be tucked into the strap retainer to prevent it from flapping around while riding.

Visor

If your helmet comes with a visor, adjust it to your desired position. The visor can be removed if you prefer not to use it.

Cleaning and care

The helmet should be cleaned regularly with mild soap and water. Do not use any harsh chemicals or solvents. The LED-rear light should be wiped clean with a damp cloth. Do not submerge the light in water.

Disposal

If your helmet is damaged or has been involved in an accident, it should be replaced immediately. Do not dispose of the helmet in regular household waste. Contact your local waste disposal facility for guidance on how to dispose of the helmet.

LED – Rear light SP-09

The LED-rear light SP-09 is designed to provide added visibility
and safety while riding. Follow these instructions for proper
use:

Before the first use

Open the battery compartment and remove the plastic tab to activate the batteries.

Removal and attachment of the tail light

The tail light can be easily removed and attached by pressing the button located on the back of the light. The light should be attached to the back of the helmet in the designated spot.

Functions

The tail light has three functions: steady mode, flashing mode, and off. Press the button once for steady mode, twice for flashing mode, and three times to turn it off.

Changing the batteries

The tail light uses a Lithium Cell CR1620 3V battery. To change the battery, open the battery compartment and replace the old battery with a new one.

Cleaning and care

The tail light should be wiped clean with a damp cloth. Do not submerge the light in water.

Disposal

If the tail light is no longer working or has been damaged, the battery should be removed and disposed of properly. Contact your local waste disposal facility for guidance on how to dispose of the tail light.

Technical Data

Haltbarkeit (Batterie und Helm): 3 years
Helmgewicht: 250 grams
Gleichspannung: 3V
IPX4 Schutz gegen Spritzwasser

Warranty

The SPEQ GmbH provides a warranty for this product. Contact the service address provided in the user manual for more information.

Dear Customer
We are pleased that you have decided to purchase one of our high-quality products, which are manufactured and certified in strict adherence to the currently valid safety standards. Familiarize yourself with this product before first use. Carefully read the operating instructions and the safety information. Use the product only as described and for the indicated purposes. Keep these instructions. If you give the product to a third party, be sure to include all the documents with it.

Safety information

Warning! This helmet should not be used by children while climbing or doing other activities when there is a risk of strangulation/hanging if the child gets trapped with the helmet.
Your helmet was specially designed for protection during cycling , skateboarding , roller-skating and riding a scooter . It must not be used forother types of sport or for motorcycling . This helmet is not suitable for downhill riding.
Please note that the helmet can only provide protection if it fits correctly. Please ensure you try out a range of different sizes before buying.
Please be aware that despite correct adjustment your helmet cannot always protect you from all injuries.
The helmet should be checked for visible deficiencies at regular intervals.
The helmet needs to be replaced after any hard impact, blow or deep scratch, as it thereby loses its protective function.
The helmet must also be replaced when it no longer fits properly or no later than 5 years after the date of manufacture, even if no damage can be detected.
Any adjustment to or removal of the original parts of the helmet can extremely impair its protective function. The helmet may not be altered in order to make additions in a way not recommended by the manufacturer.
High temperatures, from as low as 60° C, can seriously damage the helmet. Uneven helmet surfaces and the formation of small blisters are signs of such damage. Do not store behind panes of glass, e.g. in the car or close to sources of heat or warmth.
The helmet has reflective details for higher visibility in road traffic.

User information

The correct helmet position

The helmet must always be levelly horizontal on your head (Fig. A).
If the helmet is too far forward, it can impair your vision.
If the helmet is too far back, your forehead is not sufficiently protected (Fig. B).

Adjusting the single-hand twisting fastener

The integrated size-adjusting system can be adjusted using a turning knob at the back of one’s head (Fig. C):

smaller = twist clockwise
bigger = twist anti-clockwise

Adjusting the strap divider

Open the strap divider (Fig. D).
The strap divider must be positioned in such a way, that the straps are taut but comfortable. The strap divider must be below the ear, and the straps must not cover the ears
Close the strap divider (Fig. E).

An open strap divider can lead to slipping of the helmet in the event of an accident and thus to a loss of protection

Adjusting the chin strap

The chin strap (Fig. G.3) has been adjusted correctly if you feel slight pressure when you open your mouth. The buckle shall not be positioned on the jawbone.
If the chin strap (Fig. G.3) is too loose it must be pulled tight using the winding (Fig.G.2) on the fastener (Fig. G.1).
If the chin strap (Fig. G.3) is too tight it must be loosened also using the winding (Fig.G.2) on the fastener (Fig. G.1).

Please note that you must always make sure that the fastener is closed before you ride !!! (Fig. F)
Please be aware that the helmet can only protect if it fits properly.
Please try out different sizes and choose the one in which the helmet fits comfortably and sits firmly upon your head.

Visor

Carefully pull out the pins on the visor from the pin holes on the helmet shell to remove the visor (Fig. H).
The fixing holes of the visor can be closed with the pins supplied.

Attention: The pin holes on the helmet can expand through excessive use. In this case, the visor may no longer be used.

Cleaning and care

All chemicals, paints and stickers can seriously impair the protective effect of the helmet.
Only clean your helmet with lukewarm water, mild soap and a soft cloth.
After every use, leave your helmet exposed to the air in order for it to dry.
The inner pads are removable. Clean the inner padding with lukewarm water and mild soap and then let it air dry.

Disposal

Please contact your local waste disposal company for the disposal of the helmet.

Safety information

The LED rear light is not a substitute for the light equipment stipulated by the German standard StVZO (§ 67).
When used correctly, the LED rear light gives better visibility. The LED backlight should not be used during rainy weather. It cannot be guaranteed to work if it gets wet.
Please only use the LED rear light together with this cycle helmet and always put it onto
the rotating wheel of the size-adjustment system
The LED rear light is only intended for personal use.
Please make sure that, during use, the LED cannot be covered or obscured by collars, rucksacks or movements of the head.
The LED light can under certain circumstances come loose without this being noticed, if it becomes caught on jackets, rucksacks or other objects.
Please be aware that the battery of the LED light can fall out or become flat. Therefore, check the light regularly for proper functioning.
The batteries must not be exposed to excessive heat such as sunshine, fire or the like.
In the event that the batteries are incorrectly changed there exists the risk of explosion.
Only replace the batteries with the same or an equivalent battery type.
Parents should ensure that their child also checks to make sure that the LED backlight is working on a regular basis.
Warning! LED rear light not suitable for children under 14 years. There is a risk of high temperature and disassembly.
The LED rear light is not a toy and its use by children is only permitted if they are under the supervision of adults.
The light source of this light cannot be replaced. Once the light source has reached the end of its life, the whole light must be replaced.
The changing of batteries must only be carried out by adults.
If the battery leaks, avoid any contact with the skin as this can lead to skin irritation.
Leaking batteries must be disposed of immediately.
Do not short circuit batteries or take them apart. Do not make any modifications to the battery. Do not squeeze or deform the battery and do not drill into the battery.
Do not continue to use the battery if it is damaged.
Keep the batteries in the original packaging.
Never try to recharge non-rechargeable batteries! There is a danger of explosion!
Replace the battery only with the same or an equivalent type of battery.
Keep new and used batteries away from children.
Children can put small parts such as the button cell supplied in their mouths when playing and choke on them. Do not let children play with small parts.
Seek medical advice immediately if you know or suspect that a battery has been swallowed or entered the body in any other way.
Switch off the LED rear light after use. Remove the battery from the helmet if it will not be used for a longer period of time. Store the battery in a cool and dry place.
Do not bring lithium batteries with damaged casings into contact with water.
Ingestion of button cells or batteries can cause burns, perforation of soft tissues and in severe cases death.

User information

Before the first use
Take the tail light off the helmet (Fig. J). Before the first use, remove the safety strips from the reverse of the LED tail light (Fig. I).

Removal and attachment of the tail light

Release the LED back light from below with the help of a coin or similar (Fig. J).
To remove the rear light, pull the rear light out of the holder (Fig. J).
To attach it, the LED rear light must be re-plugged on the holder provided for this purpose.

Functions

The LED rear light has three different functions, each of which can be used as desired (Fig.K). newcential-SP-107-Childrena-Bicycle-Helmet-Owner-
FIG-12

Press x1: continuous light,
press x2: flashing light,
press x3: colour chaser,
press x4: light off.

Changing the batteries

The LED tail light comes equipped with a CR 1620 (3V) battery.

To replace the battery, unlock the screws at the back of the light using a small Phillips type head screwdriver.
Subsequently, lift off the lid and the circuit board, exchange the battery and remount the circuit board and the lid. In doing so, please make sure that the polarity is correct when installing the new battery (Fig. L). The + pole points downwards when the batteries are inserted.
Now, attach the lid again using the four screws (Fig. L).
Battery type: 1x CR1620, 3V 0,2W

Cleaning and care
The housing of the LED rear light can be cleaned with a damp cloth.

Disposal

Please do not dispose of flat batteries via the household waste, but instead use the collecting container intended for this purpose.

Old devices must not be disposed of with household waste!

If the product can no longer be used, every user is required by law to dispose of the device separately from household waste, e.g. at a collection point in their community/ borough. This ensures that old devices are recycled properly and also avoids pollution of the environment. For this reason, electrical equipment is marked with the symbol shown here.
Batteries and rechargeable batteries must not be disposed of as household waste! As a consumer, you are required by law to return all batteries and rechargeable batteries, regardless of whether they contain harmful substances or not, at a collection point in your local authority / district or in retail to ensure that they can be disposed of in an environmentally friendly way.Batteries and rechargeable batteries that are not permanently installed in the device must be removed and disposed of separately before disposal. Please return batteries and rechargeable batteries only when discharged! marked with: Cd = cadmium, Hg = mercury, Pb = lead

Technical data

LED rear light
Model: SP-09
Battery: 1x CR1620, 3V
Protection class: III
Risk group: Exempt group (the light does not pose a photobiological hazard)

Key to the symbols

Declaration of conformity (see chapter „Declaration of conformity“): Products marked with this symbol comply with all applicable European Community regulations Economic area.
Protection class lll. The LED light is supplied with low voltage via a battery.
Expiry date (batterie and helmet)
helmet weight
Date of manufacture (batterie and helmet)
The Seal of Approved Safety (GS mark) certifies that a product meets the requirements of the German Product Safety Act (ProdSG). The GS mark indicates that the safety and health of the user are not at risk if the product is used as intended and if foreseeable misuse of the marked product occurs.
Read the user manual
DC voltage
Protection against splash water

Declaration of Conformity

The EU Declaration of Conformity can be obtained from the following address:
SPEQ GmbH
Tannbachstraße 10
73635 Steinenberg
GERMANY

testing institute

TÜV Rheinland LGA Products GmbH Tillystrasse 2 90431 Nürnberg GERMANY identification number: 0197 PSA 2016/425 The complete Declaration of Conformity can be found at www.speq.de/konformitaetserklaerung

SPEQ GmbH warranty
Dear Customer, The product was produced with great care and under continuous quality control. Speq GmbH gives private end customers a three-year guarantee on this product from the date of purchase (guarantee period) in accordance with the following provisions.

Warranty conditions
The warranty period starts from the date of purchase. Please keep the original receipt in a safe place. This is required as proof of purchase. If a material or manufacturing defect occurs within three years from the date of purchase of this product, we will – at our option – repair or replace the product for you free of charge or refund the purchase price. This warranty service requires that within the three-year period, the defective device and the proof of purchase (receipt) are submitted and briefly described in writing what the defect is and when it occurred. If the defect is covered by our warranty, you will receive the repaired or a new product back. Repair or replacement of the product does not start a new warranty period.

Warranty period and statutory claims for defects
The warranty period is not extended by the warranty. This also applies to replaced and repaired parts. Any damage and defects already present at the time of purchase must be reported immediately after unpacking. Repairs required after the expiration of the warranty period are subject to a charge.

Warranty scope
The device was carefully produced according to strict quality guidelines and conscientiously tested before delivery. Warranty coverage applies to defects in materials or workmanship. This warranty does not cover product parts that are subject to normal wear and tear and can therefore be considered wear parts or for damage to fragile parts, e.g. switches, batteries or that are made of glass. This warranty is void if the product is damaged, improperly used or maintained. For proper use of the product, all the instructions given in the operating manual must be strictly observed. Uses and actions advised against or warned against in the operating instructions must be avoided at all costs. The product is intended for private use only and not for commercial use. Abusive and improper handling, use of force and interventions not carried out by our authorized service branch will void the warranty.

Handling in case of warranty
In order to ensure a quick processing of your request, please follow the following instructions:

For all inquiries, please have the receipt and item number(IAN 497959_2204) ready as proof of purchase.
Please refer to the type plate on the product, an engraving on the product, the title page of your manual (bottom left) or the sticker on the back or bottom of the product for the article number.
if functional errors or other defects occur, first contact the service department named below by telephone or e-mail..
if the product is found to be defective, you can send it free of charge to the service address provided by you, enclosing the receipt and stating what the defect is and when it occurred. On www.kaufland.com/manual you can download these and many more manuals. This QR code will take you directly to our international page (www.kaufland.com/manual). Clicking on the corresponding country will take you the national overview of our manuals. By entering the article number (IAN) 497959_2204 you can open your user manual.

Service address