SNAP LOCK Large Coop Run Extension Kit Instruction Manual
- June 9, 2024
- SNAP LOCK
Table of Contents
Large Coop Run Extension Kit
Instruction Manual
Large Coop Run Extension
Instruction Manual
for Snap Lock Large Chicken Coop Run
Large Coop Run Extension Kit
PARTS LIST FOR THE LARGE SNAP LOCK CHICKEN COOP RUN
This kit for the Large Model SNAP LOCK CHICKEN COOP RUN includes the
following:
- one envelope containing instructions, the warranty
- It also includes all the parts listed on this page
LARGE COOP RUN EXTENSION Assembly
Step 1: First remove the LARGE CHICKEN COOP RUN end assembly. First detach any wire twists or zip ties used to connect the chicken wire along the end section.
Step 2: Then remove first the top bar, followed by the door and door
supports, followed by the bottom bar. Set these components aside as they will
be used later. To remove the top and bottom bar, first place a screw 
Step 3: Now assemble the extension. Connect the Side Panels together by
using the Link Bar as shown. First align the side panels so that the slots on
one side align. Then insert the Link Bar into the slots leaving the top two
slots open. Press down firmly until the it locks into place.
Step 4: Repeat this process with the support bar on the reverse side of
the side panels to assemble the second wall of the CHICKEN COOP RUN EXTENSION
Step 5: Place both side panel assemblies so that the slots align with the
open slots on the end of the LARGE CHICKEN COOP assembly. Lock them into place
as shown by inserting two Link Bars into the slots, leaving the top two slots
on the LARGE CHICKEN COOP assembly open. Press the Link Bars down until they
lock into place
Step 6: Install the Bottom Bar and both Door Frame components from the
original LARGE CHICKEN RUN assembly onto the end of the LARGE CHICKEN RUN
EXTENSION as shown. Press the side Panels outward to allow the tabs of the
Bottom Bar to fit. Press the Bottom Bar down firmly until it locks into place.
Step 7: Now attach the two included Top Bars and the Top Bar removed from
the original CHICKEN COOP RUN assembly into the top two slots of the side
panels. Press the Side Panels outward to insert the tabs, then press the Top
Bars downward until they lock into place. 
Step 8: Place the End Door from the original LARGE COOP RUN assembly back
into place, now at the end of the LARGE COOP RUN EXTENSION assembly
Step 9: The Snap lock Large Chicken Coop Run Extension is compatible with all
standard chicken wire. Chicken wire is not included with the Snap lock Large
Chicken Coop Run Extension.
Cut the chicken wire to the following dimensions and quantities
42” x 17” quantity 4
45” x 21” quantity 2
Step 10: Use any zip tie or wire twist to
attach the chicken wire segments to the large coop run extension as shown
Step 10 continued: Use any zip tie or wire twist to attach the chicken
wire segments to the large coop run and stand as shown 
Step 11: You have now completely assembled the LARGE COOP RUN EXTENSION to
the LARGE COOP RUN. 
