HY-BRID LIFTS ZT-1230 Emergency Lowering System Instructions
- June 9, 2024
- HY-BRID LIFTS
Table of Contents
HY-BRID LIFTS ZT-1230 Emergency Lowering System Instructions
Auxiliary Lowering: Descent – Manual Override
For manually lowering the scissors in the case of power failure, a manual
valve on the pump is provided. To lower the scissors, pull the cable located
near the rear or the machine.
FIGURE 1: Auxiliary Lowering
FIGURE 2: Lowering Instructions
WARNING
IF PLATFORM SHOULD FAIL TO LOWER, DO NOT ATTEMPT TO CLIMB DOWN THE SCISSOR
ASSEMBLY. SERIOUS INJURY MAY RESULT. HAVE AN EXPERIENCED OPERATOR USE THE
EMERGENCY LOWERING PROCEDURE TO SAFELY LOWER THE PLATFORM.
WARNING
BEFORE LOWERING PLATFORM, RETRACT THE DECK EXTENSION.
Emergency Stop
This lift is equipped with two emergency stops, one at the platform control
and one at the base control, that when activated, will render the unit
inoperable until reset. To reset, pull the emergency stop out.
WARNING
PUSHING THE EMERGENCY STOP WILL APPLY BRAKES IMMEDIATELY. THIS MAY CAUSE
UNEXPECTED PLATFORM MOVEMENT AS THE MACHINE COMES TO A SUDDEN STOP. BRACE
YOURSELF AND SECURE OBJECTS ON THE PLATFORM DURING OPERATION OF THE MACHINE.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>