KOOL-FLO SFC-300DC-1 12 Inch Rechargeable Floor Fan User Manual

June 9, 2024
KOOL-FLO

KOOL-FLO SFC-300DC-1 12 Inch Rechargeable Floor Fan

KOOL-FLO-SFC-300DC-1-12-Inch-Rechargeable-Floor-Fan-
PRODUCT

Product Information

  • Model: SFC-300DC-1
  • SKU: 1741473
  • Power Adapter: DC30V, 0.8A
  • Built-in Battery: DC25.2V, 64.26WH
  • Charging Time: 3.5-4 hours
  • Battery Life: Up to 22 hours

Product Usage Instructions

  1. Assemble the fan carefully by following the instructions provided in the user manual. Do not attempt to assemble the fan if any parts are damaged or missing.
  2. Connect the power adapter to the fan and plug it into an electrical outlet with a current of 100V-240V and a frequency of 50/60Hz.
  3. If you want to use the fan on battery power, ensure that the battery is fully charged before disconnecting the power adapter.
  4. To charge the battery, connect the power adapter to the fan and let it charge for 3.5-4 hours.
  5. Once the battery is fully charged, you can disconnect the power adapter and use the fan on battery power for up to 22 hours.
  6. To turn on the fan, press the power button located on the control panel.
  7. Adjust the speed of the fan to your desired level using the speed control button.
  8. To turn off the fan, press the power button again.

IMPORTANT SAFETY INSTRUCTIONS
Thank you for choosing our products. This owner’s guide and disposal. Before using the product, please familiarize yourself documents for future reference.

INTENDED USE

The product is intended for indoor air circulation and general  ventilation of most household spaces. This product is not intended for commercial or industrial use. Please operate this product according to the specified intended use. The manufacturer assumes no responsibility for damage or injury due to unauthorized use or product modification. Failure to follow these instructions will void the product warranty.

WARNING: Read and save these instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.Risk to Children and Impaired Persons

  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge,  unless they have been given supervision or instruction concerning the use of the appliance by person responsible for their safety
  • Children should be supervised to ensure that they do not play with the appliance, its parts and packaging material.
  • To reduce the risk of personal injury and electric shock, the portable fan should not be played with or placed where children can reach it.

SAFETY OF USE ENVIRONMENT

  • Do not expose the product to rain or damp environment.
  • Water entering the product will increase the risk of electric shock or mafunction.
  • Do not place any parts of the product near fire or heat.
  • Following this rule will reduce the risk of explosion and possible injury.
  • Do not use this product to exhaust hazardous or explosive materials and vapors. It is intended for general ventilating use only.
  • Do not charge the product in a damp or wet location.
  • Following this rule will reduce the risk of electric shock.
  • Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properiy and completely assembled could result in serious personal injury.
  • Do not operate battery products in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Battery products create sparks which may ignite the dust or fumes.
  • Never leave the fan running unattended.
  • Keep work area clean and well lit. Cluttered or dark areas invite accidents.
  • Place this fan away from curtains, draperies, tablecloths and other fabrics, since they may be drawn into the fan, damage the motor and/or cause a fire.
  • Operate the fan on a flat, level, steady, and stable surface to avoid overturning.

OPERATION SAFETY

  • Do not allow persons unfamiliar with the battery fan or these instructions to operate the battery fan. Battery fanis dangerous in the hands of untrained users.
  • Do not attempt to disassemble or modify this product for any other purpose. Any such modification or misuse could lead to serious accidents or injuries.
  • Never insert fingers, pencils or any other objects through the grills when fan is running.
  • Keep loose or flying hair away from this product. It is possible that unsecured hair may be drawn into this fan and may become entangled and may cause injury.
  • Never operate the fan without fan grill in place. Serious personal injury may incur.
  • Do not use the battery fan if the switch does not turn it on and off. Any battery fan cannot be controlled with the switch is dangerous and must be repaired.
  • Do not subject the fan to violent impacts.
  • Do not let the fan be violently impact.
  • Do not plug/unplug the power adapter into/from the electrical outlet with wet hand.
  • Unplug the power adapter and turn off the product when removing fan grill for cleaning.
  • Place the switch in the locked or off position before making any adjustments, changing accessories, or storing the product. Such  preventive safety measures reduce the risk of  starting the product accidentally.

SAFE USE OF POWER ADAPTER

  • Before plug in, be sure the rating voltage and frequency of power source are the same indicated on the power adapter rating label.
  • Recharge only with the charger specified by the manufacturer.
  • Do not use our adapter to supply power to other products. Because the power adapter is dedicated.
  • Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar covering. Do not route under furniture or appliances.
  • Do not plug/unplug the power adapter into/from the electrical outlet with wet hand.
  • Do not abuse the power adapter. Never use the power adapter cord for carrying, pulling or unplugging the battery fan. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
  • Unplug the power adapter when moving from one location to another.
  • Do not use this product if the battery container or power adapter is damaged.
  • Unplug this product during lightning storms or when not in use.

Save these instructions. Refer to them frequently and use them to instruct others who may use this fan. If you loan someone this fan, loan them these instructions also.

PRODUCT PARTS DIAGRAM

KOOL-FLO-SFC-300DC-1-12-Inch-Rechargeable-Floor-
Fan-FIG-1

  1. Thumb screw
  2. Support arm
  3. Slide-proof rubber
  4. Handle
  5. Front grill
  6. Blade assembly
  7. Rear grill
  8. Screw
  9. Shaft sleeve
  10. Housing assembly
  11. Switch Knob
  12. Bracket assembly
  13. Rubber foot
  14. Power adapter

OPERATING INSTRUCTION

Product Specifications

  • MODEL NO.: S FC-300DC-1
  • SKU NO.: 1741473
  • POWER ADAPTER: DC30V, 0.8A
  • BUILT-IN BATTERY: DC25.2V, 64.26WH
  • Re-charge time: 3.5-4 hours
  • Work under fully charged battery:
  • Duration time at high speed: 4.5 hours
  • Duration time at low speed: 22 hours

Electrical Connection

This is a hybrid product capable of operating on alternating current (AC) through a power adapter or direct current (DC)  through a built-in battery pack.

  • To use alternating current, connect the product to a power supply that is 100V-240V, 50/60Hz.
  • To use direct current, start the product directly. If the product cannot work, please recheck whether the battery pack needs to be charged.

Assembly

This product required assembly after unpacking.

WARNING

  • Items in the Assembly section are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury.
  • If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury.
  • Do not attempt to modify this product or create accessories or attachments not recommended for use with this product. Any such alternation or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

Install Bracket
Attach the bracket to the fan following the arrow direction until hearing a click.KOOL-FLO-SFC-300DC-1-12-Inch-Rechargeable-Floor-Fan-
FIG-2

Adjusting Fan AngleKOOL-FLO-SFC-300DC-1-12-Inch-Rechargeable-Floor-Fan-
FIG-3

A: Thumb screw
B: Handle

**Control Panel

KOOL-FLO-SFC-300DC-1-12-Inch-Rechargeable-Floor-Fan-
FIG-4**

Switch knob control

  • *  **OFF:** turn off
    • Max: highest speed
    • Min: lowest speed
    • (+):anti-clockwise to increase the speed
    • ( clockwise to reduce the speed
  • Power Indicator Light
  • There are 5 LED lights to indicate the battery gauge in every 20%.
  • Charging status: the light will  blink
  • Fully charged: 5 lights will be on and stop blinking

When battery power is below 20%, onlyone red light is on, please recharge the product.

Supply Power from Power Adapter
When use with the power adapter to charge, remove thee rubber stopper A, connect the power adapter B with the power supply jack, plug the adapter to a suitable electrical outlet. (operating voltage: 100V-240V)

WARNING Recharge the fan with 30V power adapter supplied in the packaging. Do not use the adapter to charge other products. Unplug the power adapter when charging is finished and cover power supply jack with the rubber stopper.

  • When the fan is run by battery, the fan will shut off if the battery’s gauge becomes too low. If this happens, use the power charger to supply power and recharge the battery.
  • Do not use the power charger in outdoor spaces. When use the product in wet environment,  please make sure thee power supply jack is protected by rubber stoppers.
  • Unplug the power adapter and turn off the product when removing fan grill for cleaning.
  • Place the switch in the locked or off position before making any adjustments, changing accessories, or storing the product. Such preventive safety measures reduce the risk of starting the product accidentally.

CLEAN AND MAINTENANCE

  • The product should never be connected to a power supply when assembling part, making adjustments, cleaning, performing maintenance, or when the product is not in use. Disconnecting the product from the power supply will prevent accidental starting that could cause serious injury.
  • When serving, only use original manufacturer’s replacement parts, accessories and attachments. Use of any other parts may create a hazard or cause product damage.
  • Do not let brake fluids, gasoline, petroleum-based product, penetrating oils, etc., come in contact with plastic parts at any time. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.
  • Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and can be damaged by their use. Use dry cloths to remove dirt, dust, oil,  grease, etc.
  • For greater safety and reliability, all repairs should be performed by an authorized service centre.

Cleaning the Grill
Always turn off the fan and disconnect power supply from fan before cleaning. Clean fan grill periodically with a vacuum cleaner. For heavy build up, remove the front grill by removing the four screws located in the rear of the fan. Wipe grill with a mild soap. Always reinstall the front grill before use.

TROUBLESHOOTING

KOOL-FLO-SFC-300DC-1-12-Inch-Rechargeable-Floor-Fan-
FIG-7

1-YEAR LIMITED WARRANTY

  • The manufacturer warrants this product to be free from manufacturing defects in the material and workmanship under normal use for a period of one year after the date of purchase by the original purchaser.
  • The warranty will not apply in cases of:
  • Accident, misuse, or repairs performed by unauthorized personnel.
  • Any unit that has been tampered with or used for commercial purpose.
  • Normal wear and tear of wearable parts.
  • Use of force, damage caused by external influences.
  • Damage caused by non-observance of the User Manual, e.g. connection to an unsuitable mains supply or non-compliance with the instructions.
  • Partially or completely dismantled appliances.
  • Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by the manufacturer.

Please have your invoice and order ID ready before contacting Customer Support.

DISPOSAL

  • We encourage you to participate in electronics recycling program, so please observe local regulations for proper disposal of discarded electronic products.
  • Recycle raw material instead of disposing of as waste.
  • The machine, accessories and packaging should be sorted for environmental-friendly recycling.

FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved  by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15  of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals