VONYX 178.045 SPJ-1500ABT SPJ Hi-End Active Speaker Instruction Manual

: June 9, 2024
: VONYX

Table of Contents

178.045 SPJ-1500ABT SPJ Hi-End Active Speaker
Product Information:
Product Usage Instructions:
CONTROLS AND CONNECTIONS
CONNECT BT-DEVICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

178.045 SPJ-1500ABT SPJ Hi-End Active Speaker

VONYX 178.045 SPJ-1500ABT SPJ Hi-End Active Speaker

Product Information:

The SPJ Hi-End Active Speaker Series BT/USB/SD is a high-quality speaker system that can be connected to your devices using Bluetooth, USB, or an SD card. The product comes in four different models: Ref. nr. 178.045 / 178.042 / 178.041 / 178.040. The system contains voltage-carrying parts, so the housing should not be opened. It is not suitable for continuous use and should be connected to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.

Product Usage Instructions:

Carefully read the manual prior to using the product to avoid invalidating the warranty.
Take all precautions to avoid fire and/or electrical shock.
Connect the product to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
Avoid placing the product near heat sources such as radiators, on a vibrating surface, or covering the ventilation holes.
Do not plug or unplug the product with wet hands.
If the product is damaged to such an extent that internal parts are visible, do NOT plug the product into a mains outlet, and DO NOT switch the unit on. Contact your dealer for assistance.
Do not connect the product to a rheostat or dimmer.
To avoid fire and shock hazards, do not expose the product to rain and moisture.
If the product will not be used for a long period of time or during a thunderstorm, unplug it from the mains outlet.
If the product has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature and dry it before use.
When the product is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
Prior to using the product, please ask for advice from a specialist.

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to benefit fully from all features. Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

Prior to using the product, please ask advice from a specialist. When the product is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
The product contains voltage carrying parts. Therefore do NOT open the housing.
Do not place metal objects or pour liquids into the product. This may cause electrical shock and malfunction.
Do not place the product near heat sources such as radiators, etc. Do not place the product on a vibrating surface. Do not cover the ventilation holes.
The product is not suitable for continuous use.
Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
When unplugging the product from a mains outlet, always pull the plug, never the lead.
Do not plug or unplug the product with wet hands.
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
If the product is damaged to such an extent that internal parts are visible, do NOT plug the product into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the product to a rheostat or dimmer.
To avoid fire and shock hazard, do not expose the product to rain and moisture.
All repairs should be carried out by a qualified technician only.
Connect the product to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
During a thunderstorm or if the product will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
If the product has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the product in humid rooms or outdoors.
To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.
Do not repeatedly switch the product on and off. This shortens the life time.
Keep the product out of the reach of children. Do not leave the product unattended.
Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
Do not force the controls.
If this product is with speaker inside which can cause magnetic field. Keep the product at least 60cm away from computer or TV.
If the product has built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the unit for a long period of time. Or the battery may be damaged.
If the battery is damaged please replace with same specifications battery. And dispose the damaged battery environment friendly.
If the product has fallen, always have it checked by a qualified technician before you switch the product on again.
Do not use chemicals to clean the unit. They damage the varnish. Only clean the product with a dry cloth.
Keep away from electronic equipment that may cause interference.
Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
Switch the product off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the product.
Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
The mains voltage is 220-240Vac/50Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this product.
Keep the original packing material so that you can transport the product in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard. This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to. The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate and their guarantee!

NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice. Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

CONTROLS AND CONNECTIONS

VONYX 178.045 SPJ-1500ABT SPJ Hi-End Active Speaker 1

Microphone Inputs: XLR and 6.3mm ¼” input jack for connecting a microphone.
Line Inputs: XLR and RCA jack input for connecting audio units with line level output (e.g. mixer, CD player)
Line Outputs: XLR and 6.3mm ¼” output jack for connecting an extra active speaker or audio unit with line-level input.
Microphone Level: Adjust the signal level of the microphone.
Line Level: Adjust the signal level of the line input.
Master Volume: Adjust the overall output level of the portable sound set.
Treble: Adjust high tone control.
Bass: Adjust low tone control.
Clip Indicator: The indicator lights up when the signal level is too high. When the LED light up continually you must reduce the volume to protect the speaker.
Power Indicator: The indicator lights up when power is turned on.
Mode button: Press the button to select BT/USB/SD function. Press for 2 seconds to turn the media player On or Off.
Play button: For switching between play and pause.
Folder button: Press this button to open the folder map of the USB or SD card.
Repeat button: Press the key for repeating of single track or all tracks.
Forward – Backward button: For title selection (short actuation) and increase or decrease volume (long actuation).
SD port: Connect your SD/MMC devices to this slot to play music in MP3 or WMA format.
USB port: Connect your USB devices to this slot to play music in MP3 or WMA format.
MP3 Level: Adjust the level of the media player.

CONNECT BT-DEVICE

Set the search function on of the BT device you want to play the music. See the operating instructions for that device..
Press the “MODE” button and activate BT-function of media player.
Find on your BT-device “VONYX SPJ” and make the connection

SPJ Hi-End Active Speaker Series BT/USB/SD
Ref. nr.: 178.045 / 178.042 / 178.041 / 178.040 www.tronios.com