imotion TC601 Smartphone User Guide

: June 9, 2024
: imotion

imotion TC601 Smartphone User Guide

General Safety Rules

Read the Quick Start Guide carefully before using the device.
Use only the TC601 components and accessories provided by the manufacturer.
Do not attempt to disassemble the device as it does not contain parts that can be repaired by the user. Any tampering will void the warranty.
Discard replaced battery packs properly according to local laws.
Dispose of the device properly according to local laws.
Do not submerge the device in any liquid.

Package Contents

TC601 Rugged Mobile Computer
Battery Pack (with Rechargeable Battery)
Quick Start Guide
USB Charge/Communication Cable
Quick Charge Compliant Power Adapter

⚠ After unpacking, please inspect package contents. If any item is damaged or missing, please contact your customer support representative immediately.

Features

Front View

imotion TC601 Smartphone User Guide - Front View

Back View

Side View

Top View

Scan Window

Bottom View

Cradle IO Connecter / USB Connecter
Microphone

Charging Instructions

The TC601 battery pack is not initially fully charged. After installing the battery pack, please charge it via the USB cable or the charging cradle. As default, the battery pack is disconnected at the factory to avoid damage caused by excessive draining. Replace the battery pack annually to ensure maximum performance. Avoid storing batteries for long periods of time in fully charged or very low battery level status. To maintain a moderate charge and maximize battery life, charge spare battery packs every two to three months.

Installing the Battery Pack

Push the Battery Lock Switch to Open and remove the Battery Cover.
Align the Battery Pack and the device connectors and slide it into the Battery Slot.
Slide the Battery Cover into place.
Push the Battery Lock Switch to Closed to secure the battery.
Battery Cover
Battery Pack
Battery Slot

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES PROPERLY ACCORDING TO LOCAL LAWS.

Charging via USB Cable

Use the provided USB charge / communication cable together with the Quick Charge compliant power adapter to charge the TC601 from a power outlet.

Charging via Charging Cradle

Place the TC601 in the charging cradle. Attach the power adapter to the cradle, and then plug the power adapter into a power outlet.

Charging Time

Charging time required will vary depending on the actual application of the TC601 and the condition of the battery pack. This device is shipped with a lithium-ion battery that is not fully charged. Please charge this device fully before first time use. Use under environment temperatures of 0°C~45°C.

SD / SIM Card Installation

Turn off the TC601 or put it in Battery Swap Mode
Locate the SIM/Micro SD Card Slot on the side of the device.
Insert a pin into the SIM/Micro SD Card Slot pinhole.
Gently push the pin until the SIM tray pops out.
Pull the SIM tray out.
Insert the SIM or Micro SD card into the proper slot.
Slide the SIM tray back into place.

Scanning a Barcode Label

Point the scan window at the barcode you wish to scan.
Tap Scan on the Scan app screen or press a scan button on the TC601.
The imager projects a laser aiming pattern to position the barcode in the imager’s field of view. Center the laser red dot and cross-hair aiming pattern on the barcode.
Release the scan button to capture and decode the image.

Laser Safety

Do not stare into the beam of the laser light from this device. The TC601 uses an imager Aiming System with a laser light that is visible to the human eye and is emitted from the scan window at the top of the device.
Laser Light – Do not stare into this Beam Class 2 Laser Product. The maximum output radiation is 1 mW compliant with EN 60825-1 (2007)

Important Notices and Precautions

The manufacturer has made safety the first priority during the design stage. To avoid potential mishaps, please observe the following notices and precautions:

Do not stock this device under high temperature conditions that may cause the battery to overheat.
Do not charge longer than required. When the charging light is red, stop charging immediately.
Charge this device in place without any water-spray or moisture.
Use a dry cloth to wipe any dust off of the AC adapter plug to avoid potential fire.
Do not drop this device on hard surfaces.
Do not place heavy objects on this device to avoid cracking the enclosure.
Do not unplug the AC adapter with wet hands to avoid electric shock.
Do not use the AC adapter of the TC601 with any other devices.

➢ Do not place the device in liquids to prevent short-circuits or fire.
➢ Do not place this device near an open fire.
➢ If the power or USB cable is seriously twisted or broken, stop using immediately to prevent electric shock, short-circuit, or fire.
➢ Stop using immediately if there is any unusual smell or overheating during charging or operation.
➢ Stop using immediately when there is liquid or dew on the device.

⚠ * Do not use the AC adapter outdoors

Please do not wrap the AC adapter with cloth or other objects that could block heat dissipation and cause electric shock or fire.
When not charging, remove the AC adapter plug from the wall AC outlet socket to avoid a fire hazard.

Important Notices When Using

Before replacing the battery pack due to failure, shortened life, or unusual Behavior, please confirm that the device has been used correctly, with no user operation issues involved.
The manufacturer is not responsible for possible missing data or interference encountered during wireless transmissions.
Do not use alcohol, benzene, organic solvents, cleaning liquid, or steel wool on the surface of this device.
Do not scratch or mar the surface of the Scan Window in any way to avoid barcode scanning problems.

Bluetooth

This device is designed based on Bluetooth standard specifications. However, compatibility problems may still occur with other Bluetooth devices.
Before using this device, please make sure there is no other wireless device operating within a short distance of the same application area that may cause wireless signal interference.

Signal Interference from TV or Radio

Sometimes transmitting or receiving data may fail due to signal interference from nearby TV or radio devices.

Audio Safety

To prevent possible hearing damage, do not listen at high volume levels for long periods of time.

European Union Regulatory Notes

Requirements for AT/BE/BG/CZ/DK/EE/FR/DE/IS/IE/IT/EL/ES/CY/LV /LI/LT/LU/HU /MT/NL/NO/PL/PT/RO/SI/SK/TR/FI/SE/CH/UK/HR. 5150MHz~5350MHz is for indoor use only.
iWaylink INC declares that the radio equipment type for the TC601 is in compliance with Directive 2014/53/EU.
iWaylink INC declares that the radio equipment type for the TC601 is in compliance with Directive 2011/65/EU.

The full text of the EU declaration of conformity is available at the following internet address: www.imotiongroup.com/support- category/download/

UKCA Company :
Office TH2 Trident House, Trident Park Basil Hill Road, Didcot, OX11 7HJ, UK Address : Portwell UK Ltd.

SAR Compliance

SAR Information (European Union):
Head: 0.074 W/kg@ 10g (CE) Body: 0.181 W/kg@ 10g (CE) This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range.

Body-worn Operation

This device was tested for typical body-worn operations. To comply with RF exposure requirements in Europe, a minimum separation distance of 0.5cm must be maintained between the use’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided.

Power and Frequency Ranges

imotion TC601 Smartphone User Guide - Power and Frequency
Ranges imotion TC601
Smartphone User Guide - Power and Frequency Ranges

FCC Warning Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.
The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product is kept as far as possible from the user’s body or if the device is set to a lower output power if such function is available.

iWaylink Inc.
6F., No.288, Sec. 6, Civic Blvd.,Xinyi Dist., Taipei City, Taiwan https://www.imotiongroup.com
4PTC-601AMB10