imotion group PT101 Rugged Tablet User Guide
- June 3, 2024
- imotion group
Table of Contents
imotion group PT101 Rugged Tablet
Package Contents
- PT101 Rugged tablet
- Quick Start Guide
- USB Communication Cable
- 15W Power Adapter
- Hand Strap
- Stylus
After unpacking, please inspect package contents. If any item is damaged or missing, please contact your customer support representative immediately.
Features
Front View
- Status LED Indicator
- Touch Screen
- Rubber Cushion
Back View
- Speaker
- Hand Strap
- Rear Camera
Side View
- SIM Card Slot
- Micro SD Card Slot
- Power Button
Bottom View
- Micro USB Port
- Power Jack
- Docking Station Connector
- Audio Port
- Connecting Hole for Docking Station
Charging Instructions
Before using the PT101, you must fully charge the battery, and it is required to be charged over 8 hours when used for the first time. For general use, if the battery has been discharged for several days, you may need to charge it for several minutes before powering on the device. Only charge the battery with power adapter which comes with PT101. Using a different power adapter may damage your device. When the low battery warning message appears, please fully charge the battery to avoid data loss. When the battery is running very low (less than 6 percent of battery capacity), the device will automatically shut down to protect the battery being over-discharged.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES PROPERLY ACCORDING TO LOCAL LAWS.
Charging via Power Adapter
- Find the power jack on the bottom side of the PT101, and then connect the power connector of the power adapter to it.
- Plug the AC power cord into an electrical outlet to initiate the charging process.
Charging Time
Charging time required will vary depending on the actual application of the PT101 and the condition of the battery pack. This device is shipped with a lithium-ion battery that is not fully charged. Please charge this device fully before first time use and charge under environment temperatures of 0°C~40°C.
Trickle Charging Process
If the battery is running very low, or the system has an abnormal shutdown, and then it has not been turned on for over a month, the battery would come into trickle charging process when you try to charge the battery with power adapter. The monitor, LED indicator, and the power button would be useless during this time. The device would be wakened up after trickle charging for at least 15 minutes.
SD / SIM Card Installation
- Turn off the PT101 completely
- Pull off the rubber cover located on the left side of the device to find micro SD card slot and SIM card slot.
- Have the rear of the rugged tablet face towards you to install micro SD card or SIM card.
- To insert a micro SD card into the micro SD card slot, make sure the side with golden finger of the card faces downwards, and then slide the card into the slot.
- Similarly, to install a SIM card, push SIM card into SIM card slot with its gold contacts facing towards you.
- Place back the rubber cover to close the compartment.
- If you attempt to release a micro SD card or SIM card from the slot, push the card with you fingertip to slide it out.
P.S. SIM card is only available for P101 with 4G module.
Important Notices and Precautions
The manufacturer has made safety the first priority during the design stage. To avoid potential mishaps, please observe the following notices and precautions:
- Do not stock this device under high temperature conditions that may cause the battery to overheat.
- Do not charge longer than required.
- Charge this device in place without any water-spray or moisture.
- Use a dry cloth to wipe any dust off of the AC adapter plug to avoid potential fire.
- Do not drop this device on hard surfaces.
- Do not place heavy objects on this device to avoid cracking the enclosure.
- Do not unplug the AC adapter with wet hands to avoid electric shock.
- Do not use the AC adapter of the PT101 with any other devices.
- Do not place the device in liquids to prevent short-circuits or fire.
- Do not place this device near an open fire.
- If the power or USB cable is seriously twisted or broken, stop using immediately to prevent electric shock, short-circuit, or fire.
- Stop using immediately if there is any unusual smell or overheating during charging or operation.
- Do not use the AC adapter outdoors
- Please do not wrap the AC adapter with cloth or other objects that could block heat dissipation and cause electric shock or fire.
- When not charging, remove the AC adapter plug from the wall AC outlet socket to avoid a fire hazard.
Warranty Limits
The warranty period of the product is in accordance with the contract.
For any faults happened to the products under normal use and ascribed to the
inherent problems of the products through identification within the warranty
period, we will provide free maintenance services. If the products within
warranty period are judged damaged by improper artificial use by our
maintenance representatives, we will provide maintenance quotation and repair
the product after the customer agrees on our quotation. The damage of
appearance, enclosure and decorative parts and components are beyond the scope
of warranty, for which, we do not provide free maintenance services.
FCC Notes
This device meets industry and government requirements and applicable
standards. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions
manual, may cause interference to radio communications. It has been tested and
found to comply with limits for a Class A digital device pursuant to subpart B
of Part 15 of FCC Rules, which are designed to provide reasonable protection
against interference when operated in a commercial environment. Operation of
this equipment in a residential area is likely to cause interference in which
case the user at his/her own expense will be required to take whatever
measures to correct the interference.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CE Class A Warning
This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference.
Safety Instructions
This equipment is not suitable for use in locations where children are likely to be present.