hygger HG048 Internal Mini Protein Skimmer User Manual
- June 9, 2024
- hygger
Table of Contents
HG048 USER MANUAL
hygger internal mini protein skimmer
The ideal protein skimmer for nano tanks can mount inside the aquarium, and is
small enough to fit in the overflow or the filtration compartments. The
internal mini skimmer measures only 3.74″ 2.17″14.37″ , which can provide
outstanding filtration i n saltwater aquariums up to 57 gallons. This low
profile and compact protein skimmer is powered by a 4 watt DC intelligent
frequency pump with needle-wheel impeller for maximum air-to-water contact and
energy efficiency, delivering very effective organic waste removal. Water flow
can be adjusted by rotating the collection cup.
The adjustable clip is for convenient installation and operation, and it can
fit in rimless aquariums with glass thickness of 5/8 inch (15mm).
PRODUCT DIAGRAM
INSTALLATION INSTRUCTIONS
Step1— >(FIGURE 1)
- Open the package, take out the protein skimmer and the water pump;
- Connect the air intake nozzle with the pump outlet nozzle and adjust it for about 30 °;
- Let the air pipe go through the base/honey comb head;
- Use your full strength to push the water pump in to the silicone ring for seamless connection.
- The production batch in the bottom is in the right position.
- A 30° corner between the adjust air in take nozzle and the pump outlet nozzle.
- Press the water outlet into the silicon ring with your full strength.
Step2— >(FIGURE 2 )
- Take out the adjustable silencer, remove the screw with the screw driver,
- Install the adjustable clip on the silencer and mount it on the base;
- Insert the oxygen pipe in to the silencer and the base.
Step3— >(Figure 3 )
- Install and tighten the collection cup flatly on the reaction chamber;
- Connect the discharge pipe and valve;
- Plug the adapter and use it directly.
Reminder: The oxygen pipe can be cut depends on your needs.
Please make sure the air intake isslight straightly in order to get enough air-to-water contact.
Step4— >(FIGURE 4) LOCATION USE
Mount it inside the aquarium or fit it in the overflow or the filtration
compartments.
When the location i s set done, rotating the collection cup clockwise can adjust the water flow from small to big.
Please use the protein skimmer at the specified water level.
Important attentions: Ina newly installed marine tank, it’ s normal to find
some bubbles at the base of the protein skimmer. After about 2 weeks, the
bubbles will gradually decrease since the biological system of the marine take
is stabilized.
ROUTINE MAINTENANCE
Collection cup: Clean it at least once a week according t o the load of
the organic matter. Regular cleaning is beneficial to improve the separation
efficiency of the water and vapor.
Reaction chamber: Disassemble the reaction chamber. It is recommended to
clean it every 6 months.
Water pump: Remove the water pump. It is recommended to clean it every 4
months. Both white vinegar and water can be used to clean the residual dirt.
Note: The parts of the pump to be cleaned include the air filling part,
the water cover, the water bladed of the needle wheel, the rotor, the ceramic
shafts, the rubber sleeve, etc.
ATTENTIONS
- It is strictly forbidden to let the water pump run dry, otherwise i t will be easily overheated and scorched.
- It is strictly forbidden to touch the plug with wet fingers.
- Itis strictly forbidden to clean the skimmer with any chemical solution containing alcohol or ammonia, otherwise it will easily cause cracks in the acrylic.
DISPOSAL
Do not dispose of this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. This product has to be disposed of at an authorized place for the recycling of electrical and electronic appliances rather than being disposed of together with domestic waste. Collecting and recycling waste is a way of saving natural resources. So, please consult with your local seller to make sure the product is disposed of in an environmentally friendly way.
ONE YEAR LIMITED WARRANTY
This product MUST be purchased from an authorized hygger reseller. Visit our
website for a list of authorized resellers. hygger warrants this product
against defects in materials and workmanship for ONE(1) YEAR from the date of
the original retail purchase and is non-transferable. Warranty on all
products, including aquariums. But it is limited t o the replacement of the
products and does not cover fish loss, personal injury, property loss or
direct, incidental or consequential damage caused by using this product.
Note: hygger One-year Limited Warranty does not cover damage caused by
the followings: improper installation, saltwater corrosion, electrical surges
or modifications.
If you discover a defect, please contact hygger, who will, at its option,
repair or replace the product at no charge, provided that you return i t
during the warranty period. A copy of the bill of sale is required as proof of
the original purchase date in the event o f the product needing repairs within
the warranty period. hygger does not warrant any products that are not hygger’
s . This warranty does not apply if the product has been damaged by accident,
abuse, misuse or misapplication, or modified without the written permission of
hygger.
PACKING LIST
1x Reaction chamber
1x DC water pump
1x Collection cup with lid
1x Accessories bag (include valve/discharge pipe/oxygen p i p e )
1x Screw driver
1x Adapter
1x User manual
CONTACT INFORMATION
Company name: Shenzhen Mago Trading Co., Ltd
Add: Bantian Group Business Central, Longgang District, Shenzhen City,
Guangdong Province, China
Website: www.hygger-online.com
E-mail: Mago@hygger-online.com
If you have any problem, please provide your amazon order id (amazon invoice)
and shipping
address by E-mail: mago@hygger-online.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>