HONOR CHOICE MLN-00 X3 Earbuds Instructions

: June 9, 2024
: HONOR CHOICE

Table of Contents

Safety Information
FCC Regulatory Compliance RF Exposure
Documents / Resources

CHOICE MLN-00 X3 Earbuds
Instructions

Safety Information

Do not use the device in dusty, humid, dirty places or near magnetic fields, which may cause the internal circuits to malfunction.
When you use the device to listen to music or make phone calls, we suggest keeping the volume down to avoid damage to your hearing. Prolonged exposure to high volumes may result in permanent hearing damage.
Always put safety as your primary responsibility and do not engage in distracting activities while driving.
Do not wrap or seal the device, cover it with towels and otheritems, or use it in closed environments such as a box or case.
Do not place the device near heat sources or open flames, such as electric heaters, microwave ovens, ovens, water heaters, stove water, wax candles, or places where high temperatures may occur.
Do not dry the device with external heating devices such as microwave ovens or hairdryers.
Use a clean, dry, and soft cloth to wipe the device and stop using it before cleaning and maintenance.
Please use the device under 0°C – 45°C and store it and its accessories under -20°C – +45°C. Extreme ambient temperatures may cause the device to malfunction.
Store the device and its accessories in a ventilated and cooling place free from direct sunlight.
This device and its accessories may contain small parts. Please keep them out of the reach of children. Children may inadvertently damage the device and accessories, or swallow the small parts, causing suffocation or other dangers.
Do not disassemble or modify the device and its accessories without permission, or they will no longer be covered by our warranty. Please contact our customer service in case of a malfunction.
Do not dispose of this device and its accessories as ordinary household waste. Please comply with the local laws and regulations on the handling of this device and its accessories and support recycling.
Do not step on, pull, or overbend the cables of the device to a void malfunction.
Do not use strong chemicals, cleaning agents, or detergents to clean the device or its metal parts. Instead, use a clean, dry, and soft cloth to wipe them.

FCC Regulatory Compliance RF Exposure

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Keep the device and its accessories dry. Do not use external heating devices such as microwave ovens or hair dryers to dry them.
Do not put the device and its accessories in places of extreme temperature, as this may cause malfunction, ﬁre, or explosion.
Stop using the device before cleaning and maintenance, turn oﬀ all applications, and disable all wireless or wired connections with other devices.
Do not use strong chemicals, cleaning agents, or detergents to clean the device or its accessories. Instead, use a clean, dry, and soft cloth to wipe them.
Do not leave cards with magnetic stripes (e.g., bank cards, phone cards) in contact with the device for long, as this may damage the magnetic stripe.
Please contact seller directly for post-sale issues for quick solution. For escalation, please contact manufacturer Cosonic to handle it.
Email: [email protected]
Twitter: https://twitter.com/MoecenCH

UKCA/EU
Hereby, Cosonic Intelligent Technologies Co.，Ltd. declares that the wireless equipment listed in this document is in compliance with the UK Radio Equipment Regulations SI 2017 No. 1206.
The full text of the system UK declaration of conformity is available at: http://www.cosonic.cc
Manufacturer information:
Company name: Cosonic Intelligent Technologies Co.，Ltd.
Address： Room 506 building 1,No.6,South Industrial Road, Songshan Lake
High-tech Industrial Development Zone, Dongguan City, Guangdong, P.R.China 523808
Operation frequency(Max power): <10dBm
Operation frequency: 2400MHz-2483.5MHz
RF exposure information: The EIRP power of the device at maximal case is below the exempt condition, 20mW speciﬁed in EN62479: 2010. RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as speciﬁed in
EC Council Recommendation(1999/519/EC).

Product model: MLN-00
The internal encoding
HONOR CHOICE MLN-00 X3 Earbuds - qr code
300404131163E00