soundcore Rave Neo 2 Portable Bluetooth Party Speaker User Manual

soundcore Rave Neo 2 Portable Bluetooth Party Speaker

At a Glance

1. Light mode
2. BassUp
3. Power
4. Bluetooth
5. PartyCast
6. Volume down
7. Play/Pause
8. Volume up
9. USB-C for charging in
10. USB-A for USB playback and charging out
11. AUX

Charging

Charge your Speakers
Fully charge this speaker before the first use to prolong the lifespan of the built-in battery.

Check Battery Level

Charge your USB Devices
Charge your USB devices through the USB port.

**Powering On/Off

**

| Press once|

Power on

---|---|---
| Steady white
| Press and hold for 2 seconds| ****

Power off

****| Light off

This speaker will power off automatically after 20 minutes if no device is connected.

Using Your Speaker

Bluetooth Mode
With this speaker, you can enjoy music through your Bluetooth-enabled devices .

| Press| Enter Bluetooth pairing mode
---|---|---
| Flashing blue| Bluetooth pairing
| Steady blue| Bluetooth connected

• This speaker can pair with 2 mobile devices via Bluetooth. To pair with another Bluetooth device, press the Bluetooth button once to re-enter Bluetooth pairing mode.
• This speaker can only play music on one mobile device at a time. To play from another connected device, pause the device that’s currently active first.
• Each time you power on your speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.

TWS (True Wireless Stereo) Mode
Two identical Rave Neo 2 speakers can pair with each other for stereo sound. Both speakers can play the same audio (one as L channel and the other as R channel).

1. Connect either speaker with your Bluetooth device.
2. On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode.

| Press and hold for at least 2 seconds| Enter TWS pairing mode
---|---|---
| Flashing white| TWS pairing
| Steady blue (Speaker 1)|

TWS connected

| Steady white (Speaker 2)

To exit TWS mode, press and hold the Bluetooth button for at least 2 seconds.

PartyCast Mode
You can wirelessly connect up to 100 identical Rave Neo 2 speakers together.

1. Connect a Rave Neo 2 speaker with your smartphone or tablet as Speaker 1.
2. Press the PartyCast button once on Speaker 1 and all the additional speakers to enter the pairing mode. When successfully connected, you will hear a prompt sound.

Steady white

| PartyCast pairing
PartyCast connected

• PartyCast 2.0 technology can sync up stereo sound and is compatible with PartyCast 1.0. Any Rave Neo 2 speaker can connect with a speaker supporting PartyCast 1.0.
• To exit the PartyCast mode, press the PartyCast button once on any Rave Neo 2 speaker.

AUX/USB Mode
Plug in a 3.5 mm audio cable or insert a USB storage device.

When using AUX mode, control audio playback via the connected device.

Button Controls

| Press once| Play/Pause
| Press twice| Next track
| Press three times| Previous track
| Press or press and hold| Adjust volume
****| Press once| Turn BassUp on/off

Reset

Press and hold the Bluetooth button and volume up button simultaneously for at least 4 seconds to reset the speaker.

Light Effects

Download the Soundcore app to check all available light modes.

• Campfire Vibes
• Neon Night
• Spring Break
• Euphoric Dance
• Romantic Stroll
• Flow
• Party

Soundcore App

Download the Soundcore app to enhance your experience.

• Product information: Check the product name and software version, or read the user manual.

• Firmware update: You will be informed once a new version of firmware is detected when you connect the speaker with the app.

• Battery status: Indicates the remaining battery level of your speaker.

• Volume control: Adjust the volume level via the app without pressing the buttons on the speaker.

• EQ settings: There are 6 EQ settings you can choose from in the app to optimize your experience while enjoying different music genres.

• Soundcore Signature: Normal EQ mode with well-balanced sound.

• Voice: Voices stand out more clearly from other ambient sounds.

• Treble Boost: High frequencies are enhanced.

• Balance: No enhancement for high-frequency and low-frequency sounds.

• Custom: Customize the EQ setting to suit you in the app.

• BassUp: Turn on BassUp to enhance the low-frequency sound.
  Set auto-power off time: Set an auto-power off time (5/10/20/60 minutes, 20 minutes by default), the speaker will automatically power off when the time is up.

• Voice prompt: Mute or restore the voice prompt while powering on/off.

Specifications

Specifications are subject to change without notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>