Lightcloud WFRL4R99TW120WB Tunable White Edge Lit Wafer User Manual

Welcome
Tunable White Edge-Lit Wafer
WFRL4R99TW120WB-SS-NS/LCB
WE’RE HERE TO HELP: 1(844) LIGHTCLOUD 1(844) 544-4825

WFRL4R99TW120WB Tunable White Edge Lit Wafer

Hello
Lightcloud Blue is a Bluetooth mesh wireless lighting control system that allows you to control RAB’s various compatible devices. With RAB’s patent- pending Rapid Provisioning technology, devices can be quickly and easily commissioned for residential and large commercial applications using the Light cloud Blue mobile app. Each device in a system can communicate with any other device, eliminating the need for a Gateway or Hub and maximizing the control system’s
reach.

Product Features

Direct Connect LED, No Gateway or Hub required
Wireless control from your mobile device
On/off and dimming
Tunable White 2700K – 6500K
Group devices together
Create custom scenes
Sensor compatible
Schedules and automations
Smartsheet™ automated circadian schedule

Catalog Number:
WFRL4R99TW120WB-SS-NS/LCB
Model Number:
WFRL4R99TW120WB-SS-NS/LCB
Electrical:
9W, 550lm
120Vac, 60Hz
Construction:
Installation: Direct Wire
Size: 4”
Trim Finish: White
Trim Style: Baffle

Safety Information

• Not suitable for use with dimmers and sensors unless specifically designed for RAB Light cloud Blue downlights.

• Risk of electrical shock. Disconnect power at fuse or circuit breaker before installing or servicing.

• No user serviceable parts inside. To avoid electrical shock do not disassemble product.

• Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.

• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.

• This device is not intended for use with emergency exits.

• This retrofit kit is suitable for wet locations luminaires specified below:
  Type Non IC; Type IC.

• The retrofit kit is accepted as a component of a luminaire where the suitability of the combination shall be determined by authorities having jurisdiction. Product must be installed by a qualified electrician in accordance with the applicable and appropriate electrical codes. The installation guide does not super cede local or national regulations for electrical installations.

• Installers should examine all parts that are not intended to be replaced by the retrofit kit for damage, and replace any damaged parts prior to installation of  the retrofit kit.

Risk of fire or electric shock

• LED Retrofit Kit installation requires knowledge of luminaires electrical systems. If not qualifed, do not attempt installation. Contact a qualified electrician.
• Install this kit only in luminaires that have the construction features and minimum dimensions shown in the Figure 1 and where the input rating of the  retrofit kit does not exceed the input rating of the luminaire.

What’s in the box

Tools needed

This Light cloud Blue Edge-Lit Wafer requires very few tools for installation.
A screwdriver and a pair of wire cutters will help to install.

Optional accessories

DLPLATE/WFR3456

|
---|---
DLPLATE/WFR3468/NB
Mounting plate with nailery bar| EXTCBL-FA-6
Wafer extension cable 6ft
EXTCBL-FA-12
Wafer extension cable 12ft
EXTCBL-FA-20
Wafer extension cable 20ft

Installing your Light cloud Blue Device

1. Turn off power
   • Place the wall switch in the off position.
   • Turn off the main power at the breaker panel or remove the fuse from the fuse box.
   1a. Find a suitable location
   • Lightcloud Blue devices should be positioned within 60 ft. of each other.
   • Building materials such as brick, concrete and steel construction may require additional Light cloud Blue devices to extend around an obstruction.

2. Install the Light cloud Blue Edge-Lit Wafer

3. Turn power OFF from the electrical panel before installation.

4. Use template inside box to cut hole in ceiling. (Fig.1)

5. Open the driver box and remove the knockout(s). (Fig.2)

6. Insert the electrical supply cable through the knockout and secure with attached terminal.
   Wire driver box (Fig.3), white – white, black – black, green – green/ground.

7. Place all wiring and connections back into the box, close the cover. (Fig.4)

8. Place the driver box into the ceiling and connect the fixture to driver box. (Fig.5)

9. Lifting both retention tabs upward. Push until the trim sits flush against the ceiling. (Fig.6)

Controlling your Light cloud Blue Device

1. Confirm your device is powered on.

2. Download the Light cloud Blue app from the Apple® App Store or Google® Play store.

3. Launch the App and create an account.

4. Tap the “add device” icon in the app to start connecting devices.

5. Follow the remaining steps in the app. Create areas, groups, and scenes to organize and control your devices.

6. You’re all set!

Setting Device to Pairing Mode

If your Lightcloud Blue Edge-Lit Wafer is already paired, you can reset it by using the below methods.
Method 1: Delete from App
Open the app and access the device settings for the paired device. Be sure that the downlight is online and select “Delete”.
Method 2: Manual
Power the downlight off and on 5 times consecutively. Do not allow less than 4 seconds to elapse from switch off to on, do not allow more than 2 seconds @ to  elapse from switch on to off. The downlight will flash 3 times, then reset to = 100% brightness at default CCT.
Method 3: Rapid Reset Tool
The rapid reset process must be done by professional electricians qualified by RAB. Reach out to your RAB sales manager to request a Rapid Reset Tool.
The tool simply needs to be placed directly on the small Lightcloud logo on downlight for 2 seconds. The downlight will flash 3 times, then reset to 100% < brightness at default CCT.

Functionality

Configuration
All configuration of Lightcloud Blue products may be performed using the Lightcloud Blue app.
Emergency default
If communication is lost, the Lightcloud Blue Edge-Lit Wafer may fall back to a specific state, such as turning the Lightcloud Blue Edge-Lit Wafer on.

WE’RE HERE TO HELP:
1 (844) LIGHTCLOUD
1 844-544-4825
support@lightcloud.com

[ Warning: Any wires not in use must be capped off or otherwise insulated. ]

FCC Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may no cause harmful interference, and  2. This device must accept any interference received, including interference that may cause undesired operation.
Note: This device has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 Subpart B the FCC rules. These limits are  designed to provide reasonable protection against harmful interference in a residential environ mint. This equipment generates, uses, and can radiate radio  frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However,  there is no guarantee that inter ference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television which  can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To comply with the FCC’s RF exposure limits for general population / uncontrolled exposure, this transmitter must be installed provide a separation distance of  at least 20 cm from all persons and must not be co-located or operating in conjunction with an other antenna or transmitter.
CAUTION: Changes or modifications to this equipment not expressly approved by RAB Lighting may void the user’s authority to operate this equipment.

Lightcloud Blue is a Bluetooth mesh wireless lighting control system that allows you to control RAB’s various compatible devices. With RAB’s patent- pending  Rapid Provisioning technology, devices can be quickly and easily commissioned for residential and large commercial applications using the Lightcloud Blue  mobile app. Each device in a system can communicate with any other device, eliminating the need for a Gateway or Hub and maximizing the control system’s  reach. Learn more at www.rablighting.com
1(844) LIGHTCLOUD
1(844) 544-4825

©2022 RAB LIGHTING Inc.
Made in China
Pat. rablighting.com/ip

References

• RAB VIRTUAL PATENT MARKING PAGE
• Welcome to RAB

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>