DRAPER 04991 Motorcycle Scissor Stand User Manual
- June 9, 2024
- DRAPER
Table of Contents
DRAPER 04991 Motorcycle Scissor Stand
These instructions accompanying the product are the original instructions.
This document is part of the product, keep it for the life of the product,
passing it on to any subsequent holder of the product. Read all these
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which
the product has been designed, and contains all the necessary information to
ensure its correct and safe use. Following all the general safety instructions
contained in this manual will ensure both product and operator safety,
together with longer life of the product itself.
All photographs and drawings in this manual are supplied by Draper Tools to
help illustrate the operation of the product.
While every effort has been made to ensure the accuracy of information
contained in this manual, the Draper Tools policy of continuous improvement
determines the right to make modifications without prior warning.
INTRODUCTION
USER MANUAL FOR: Motorcycle Scissor Stand Stock No: 04991.
Part No: MCPL1.
REVISIONS:
Date first published August 2011.
Date of revision November 2021.
As our user manuals are continually updated, users should make sure that they
use the very latest version.
Downloads are available from:
drapertools.com/manuals
Draper Tools Limited Hursley Road Chandler’s Ford Eastleigh Hampshire SO53 1YF UK
Draper Tools Limited Oude Graaf 8 6002 NL WEERT Netherlands
Website: drapertools.com
Product Help Line: +44 (0) 23 8049 4344
General Fax: +44 (0) 23 8026 0784
UNDERSTANDING THIS MANUAL’S SAFETY CONTENT:
Warning! – Information that draws attention to the risk of injury or
death.
Important – Information that draws attention to the risk of damage to the
product or surroundings.
COPYRIGHT © NOTICE :
Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal and
educational use only. Commercial copying, redistribution, hiring or lending is
prohibited.
No part of this publication may be stored in a retrieval system or transmitted
in any other form or means without written permission from Draper Tools
Limited.
In all cases this copyright notice must remain intact.
WARRANTY
WARRANTY
Draper tools have been carefully tested and inspected before shipment and are
guaranteed to be free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your
nearest distributor
or contact: Draper Tools Limited, Chandler’s Ford, Eastleigh, Hampshire,
SO53 1YF, England. Telephone Sales Desk: +44 (0) 23 8049 4333 or Product
Help Line +44 (0) 23 8049 4344.
A proof of purchase must be provided with the tool.
If upon inspection it is found that the fault occurring is due to defective
materials or workmanship, repairs will be carried out free of charge. This
warranty period covering parts and labour is 12 months from the date of
purchase, except where tools are hired out when the warranty period is 90 days
from the date of purchase. This warranty does not apply to any consumable
parts, any type of battery or normal wear and tear, nor does it cover any
damage caused by misuse, careless or unsafe handling, alterations, accidents,
or repairs attempted or made by any personnel other than the authorised Draper
warranty repair agent.
Note: If the tool is found not to be within the terms of warranty,
repairs and carriage charges will be quoted and made accordingly.
This warranty applies in lieu of any other warranty expressed or implied and
variations of its terms are not authorised.
Your Draper warranty is not effective unless you can produce upon request a
dated receipt or invoice to verify your proof of purchase within the warranty
period.
Please note that this warranty is an additional benefit and does not affect
your statutory rights.
Draper Tools Limited.
INTRODUCTION
SCOPE
Motorcycle Scissor Stand stand suitable for use on the floor or on a
motorcycle lift.
SPECIFICATION
- Stock No. ………………………………………………………………………………………………………………..04991
- Part No. ………………………………………………………………………………………………………………..MCPL1
- Capacity ………………………………………………………………………………………………………………….450kg
- Safe Working Load …………………………………………………………………………………………………..450kg
- Minimum Height ……………………………………………………………………………………………………….85mm
- Maximum Height …………………………………………………………………………………………………….340mm
- Platform Size ………………………………………………………………………………………………..380 x 230mm
- Base Size …………………………………………………………………………………………………….380 x 230mmNett
- Weight ……………………………………………………………………………………………………………11.50kg4.3
HANDLING AND STORAGE
- Care must be taken when handling this product.
- This product is not a toy and must be respected. −Environmental conditions can have a detrimental effect on this product if neglected.
- Exposure to damp air can gradually corrode components.
- If not cleaned and maintained correctly or regularly, the machine will not perform at its best.
HEALTH AND SAFETY INFORMATION
GENERAL SAFETY INSTRUCTIONS
- Warning! Before use, ensure that the motorcycle to be supported has a suitable structure and centre of gravity to accommodate the platform without damaging the motorcycle. Do not use if the stand will foul on the exhaust or other vulnerable parts.
- Place the stand in a suitable work area. Keep the area clean and tidy and free from unrelated materials and ensure that there is adequate lighting. Ensure that the floor is level and strong enough (preferably concrete) to take the weight of the stand and the bike. Do not operate the stand on tarmacadam as the surface may be unstable.
- Keep the stand clean for best and safest performance.
- The maximum bike weight is 450kg. Do not exceed this rated capacity.
- Before lifting, check that there are no overhead obstructions.
- Keep children and unauthorised persons away from the work area.
- Do not use the stand for a task it is not designed to perform.
- Do not operate the stand if damaged.
- Do not exceed the rated capacity of the stand.
- Do not allow untrained persons to operate the stand.
- Do not make any modifications to the stand.
- Before lowering the stand, ensure that there are no obstructions underneath the motorcycle and that all persons are standing clear.
- Before storing, ensure that all parts are clean and free of grease and oil and the stand is fully lowered. Store stand in a safe area.
- Warning! The instructions referred to in this manual are unable to cover all possible situations that may occur. It must be understood that common sense and caution are factors which are unable to build into this product, but must be applied by the operator.\
RESIDUAL RISK
Important: Although the safety instructions and operating manuals for our
tools contain extensive instructions for safe working with lifting equipment,
every machine involves a certain residual risk which can not be completely
excluded by safety mechanisms. Lifting equipment must therefore always be
operated with caution!
TECHNICAL DESCRIPTION
IDENTIFICATION
- Lift table.
- Base foot.
CONTACTS
Draper Tools Limited, Hursley Road,
Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF, U.K.
EU: Oude Graaf 8 6002 NL Weert (NL)
Help Line: +44 (0) 23 8049 4344
Sales Desk: +44 (0) 23 8049 4333
Internet: drapertools.com
Email: sales@drapertools.com
General Enquiries: +44 (0) 23 8026 6355
Service/Warranty Repair Agent:
For aftersales servicing or warranty repairs, please contact the Draper Tools
Help Line for details of an agent in your local area.
MSPR1221
©Published by Draper Tools Limited.
No part of this publication may be reproduced, stored in a retrieval system or
transmitted in any form or by any means, electronic, mechanical photocopying,
recording or otherwise without prior permission in writing from Draper Tools
Ltd.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>