ZEISS A6 Single Use Injector with AT Smart Cartridge Set Instructions
- June 9, 2024
- Zeiss
Table of Contents
A6 Single Use Injector with AT Smart Cartridge Set Instructions
A6 Single Use Injector with AT Smart Cartridge Set
Handling instructions for non-preloaded ZEISS MICS IOLs
Preparing the non-preloaded ZEISS MICS IOLs for use.
Fill the barrel halfway with viscoelastic substance, preferably with
hypromellose.
Put two lines of viscoelastic to the plane of the cartridge. Do not touch the
tip of the cartridge.| Pull the lens gently from its holder using a forceps
with fine tips.
Do not let the IOL dry up.
Do not use the fluid from the bottle for ocular irrigation.| Place the lens in
the center of the
opened cartridge.
Hold optic down, center the IOL on the loading deck of the cartridge.
Close the cartridge without clamping the lens.| Control the position of the
lens within the channel of the closed cartridge. Haptic must move freely.|
Injector A6 with groove for introduction of the *AT.Smart cartridge.
Push the loaded cartridge from the front into the groove until stop
position.| Lock cartridge by holding the tip and rotating the injector.|
Gently push plunger forward and check regular and continuous forward movement
of the lens.
Please refer to our webpages for diopter range applicable for each MICS IOL.
*AT.Smart Cartridge
Single-use injector A6 with silicone tip
EN_32_022_0025I
Single Injector A6 is a reference of MDJ (120). The contents of the brochure
may differ from the current status of approval of the product in your country.
Please contact our regional representative for more information. Subject to
change in design and scope of delivery and as a result of ongoing technical
development. Printed on elemental chlorine-free bleached paper.
© 2015 by Carl Zeiss MediaTek AG. All copyrights reserved.
Carl Zeiss Meditec AG
Goeschwitzer Str. 51–52
07745 Jena
Germany
www.zeiss.com/iol
www.zeiss.com/med/contacts
AT.Smart Cartridge Set