AEG IKE84443FB Induction Hob User Manual
- June 9, 2024
- AEG
Table of Contents
IKE84443FB Induction Hob
IKE84443FB
USER MANUAL
SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the supplied
instructions. The manufacturer is not responsible for any injuries or damage
that are the result of incorrect
ENGLISH 25
installation or usage. Always keep the instructions in a safe and accessible
location for future reference. 1.1 Children and vulnerable people safety ·
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a safe way and understand
the hazards involved. Children of less than 8 years of age and persons with
very extensive and complex disabilities shall be kept away from the appliance
unless continuously supervised. · Children should be supervised to ensure that
they do not play with the appliance. · Keep all packaging away from children
and dispose of it appropriately. · WARNING: Keep children and pets away from
the appliance when it operates or when it cools down. Accessible parts become
hot during use. · If the appliance has a child safety device, it should be
activated. · Children shall not carry out cleaning and user maintenance of the
appliance without supervision. 1.2 General Safety · WARNING: The appliance and
its accessible parts become hot during use. Care should be taken to avoid
touching heating elements. · WARNING: Unattended cooking on a hob with fat or
oil can be dangerous and may result in fire. · NEVER try to extinguish a fire
with water, but switch off the appliance and then cover flame e.g. with a lid
or a fire blanket. · WARNING: The appliance must not be supplied through an
external switching device, such as a timer, or connected to a circuit that is
regularly switched on and off by a utility.
26 ENGLISH
· CAUTION: The cooking process has to be supervised. A short term cooking
process has to be supervised continuously.
· WARNING: Danger of fire: Do not store items on the cooking surfaces.
· Metallic objects such as knives, forks, spoons and lids should not be placed
on the hob surface since they can get hot.
· Do not use the appliance before installing it in the built-in structure.
· Do not use a steam cleaner to clean the appliance. · After use, switch off
the hob element by its control and do
not rely on the pan detector. · If the glass ceramic surface / glass surface
is cracked,
switch off the appliance and unplug it from the mains. In case the appliance
is connected to the mains directly using junction box, remove the fuse to
disconnect the appliance from power supply. In either case contact the
Authorised Service Centre. · If the supply cord is damaged, it must be
replaced by the manufacturer, an authorized Service or similarly qualified
persons in order to avoid a hazard. · WARNING: Use only hob guards designed by
the manufacturer of the cooking appliance or indicated by the manufacturer of
the appliance in the instructions for use as suitable or hob guards
incorporated in the appliance. The use of inappropriate guards can cause
accidents.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING! Only a qualified person must install this appliance.
WARNING! Risk of injury or damage to the appliance.
· Remove all the packaging. · Do not install or use a damaged
appliance. · Follow the installation instructions
supplied with the appliance. · Keep the minimum distance from other
appliances and units. · Always take care when moving the
appliance as it is heavy. Always use safety gloves and enclosed footwear.
· Seal the cut surfaces with a sealant to prevent moisture from causing
swelling.
· Protect the bottom of the appliance from steam and moisture.
· Do not install the appliance next to a door or under a window. This prevents
hot cookware from falling from the appliance when the door or the window is
opened.
· Each appliance has cooling fans on the bottom.
· If the appliance is installed above a drawer: Do not store any small
pieces or sheets of paper that could be pulled in, as they can damage the
cooling fans or impair the cooling system. Keep a distance of minimum 2 cm
between the bottom of the appliance and parts stored in the drawer.
· Remove any separator panels installed in the cabinet below the appliance.
2.2 Electrical Connection
WARNING! Risk of fire and electric shock.
· All electrical connections should be made by a qualified electrician.
· The appliance must be earthed. · Before carrying out any operation make
sure that the appliance is disconnected from the power supply. · Make sure
that the parameters on the rating plate are compatible with the electrical
ratings of the mains power supply. · Make sure the appliance is installed
correctly. Loose and incorrect electricity mains cable or plug (if applicable)
can make the terminal become too hot. · Use the correct electricity mains
cable. · Do not let the electricity mains cable tangle. · Make sure that a
shock protection is installed. · Use the strain relief clamp on the cable. ·
Make sure the mains cable or plug (if applicable) does not touch the hot
appliance or hot cookware, when you connect the appliance to a socket. · Do
not use multi-plug adapters and extension cables.
· Make sure not to cause damage to the mains plug (if applicable) or to the
mains cable. Contact our Authorised Service Centre or an electrician to change
a damaged mains cable.
· The shock protection of live and insulated parts must be fastened in such a
way that it cannot be removed without tools.
· Connect the mains plug to the mains socket only at the end of the
installation. Make sure that there is access to the mains plug after the
installation.
· If the mains socket is loose, do not connect the mains plug.
· Do not pull the mains cable to disconnect the appliance. Always pull the
mains plug.
· Use only correct isolation devices: line protecting cut-outs, fuses (screw
type fuses removed from the holder), earth leakage trips and contactors.
· The electrical installation must have an isolation device which lets you
disconnect the appliance from the mains at all poles. The isolation device
must have a contact opening width of minimum 3 mm.
2.3 Use
WARNING! Risk of injury, burns and electric shock.
· Remove all the packaging, labelling and protective film (if applicable)
before first use.
· This appliance is for household (indoors) use only.
· Do not change the specification of this appliance.
· Make sure that the ventilation openings are not blocked.
· Do not let the appliance stay unattended during operation.
· Set the cooking zone to “off” after each use.
· Do not put cutlery or saucepan lids on the cooking zones. They can become
hot.
· Do not operate the appliance with wet hands or when it has contact with
water.
· Do not use the appliance as a work surface or as a storage surface.
· If the surface of the appliance is cracked, disconnect immediately the
appliance
from the power supply. This to prevent an electrical shock. · Users with a
pacemaker must keep a distance of minimum 30 cm from the induction cooking
zones when the appliance is in operation. · When you place food into hot oil,
it may splash.
WARNING! Risk of fire and explosion
· Fats and oil when heated can release flammable vapours. Keep flames or
heated objects away from fats and oils when you cook with them.
· The vapours that very hot oil releases can cause spontaneous combustion.
· Used oil, that can contain food remnants, can cause fire at a lower
temperature than oil used for the first time.
· Do not put flammable products or items that are wet with flammable products
in, near or on the appliance.
WARNING! Risk of damage to the appliance.
· Do not keep hot cookware on the control panel.
· Do not put a hot pan cover on the glass surface of the hob.
· Do not let cookware boil dry. · Be careful not to let objects or cookware
fall on the appliance. The surface can be damaged. · Do not activate the
cooking zones with empty cookware or without cookware. · Do not put aluminium
foil on the appliance. · Cookware made of cast iron, aluminium or with a
damaged bottom can cause scratches on the glass / glass ceramic. Always lift
these objects up when you have to move them on the cooking surface. · This
appliance is for cooking purposes only. It must not be used for other
purposes, for example room heating.
2.4 Care and cleaning
· Clean the appliance regularly to prevent the deterioration of the surface
material.
· Switch off the appliance and let it cool down before cleaning.
· Do not use water spray and steam to clean the appliance.
· Clean the appliance with a moist soft cloth. Use only neutral detergents. Do
not use abrasive products, abrasive cleaning pads, solvents or metal objects.
2.5 Service
· To repair the appliance contact the Authorised Service Centre. Use original
spare parts only.
· Concerning the lamp(s) inside this product and spare part lamps sold
separately: These lamps are intended to withstand extreme physical conditions
in household appliances, such as temperature, vibration, humidity, or are
intended to signal information about the operational status of the appliance.
They are not intended to be used in other applications and are not suitable
for household room illumination.
2.6 Disposal
WARNING! Risk of injury or suffocation.
· Contact your municipal authority for information on how to dispose of the
appliance.
· Disconnect the appliance from the mains supply.
· Cut off the mains electrical cable close to the appliance and dispose of it.
INSTALLATION
WARNING! Refer to Safety chapters.
3.1 Before the installation
Before you install the hob, write down the information below from the rating
plate. The rating plate is on the bottom of the hob.
Serial number ………………………
3.2 Built-in hobs
Only use the built-in hobs after you assemble the hob into correct built-in
units and work surfaces that align to the standards.
3.3 Connection cable
· The hob is supplied with a connection cable.
· To replace the damaged mains cable, use the cable type: H05V2V2-F which
withstands a temperature of 90 °C or higher. Speak to your local Service
Centre. The connection cable may only be replaced by a qualified electrician.
WARNING! All electrical connections must be made by a qualified electrician.
CAUTION! Do not drill or solder the wire ends. It is forbidden.
CAUTION! Do not connect the cable without cable end sleeve.
Two-phase connection 1. Remove the cable end sleeve from black
and brown wires. 2. Remove an insulation of the brown and
black cable ends. 3. Apply a new wire end sleeve of 1.5 mm²
on common cable end (special tool required). Cable cross section 1,5 mm²
220-240 V~
N L
400V 2~N
N L1 L2
One-phase connection – 220 – 240 V~ Green – yellow
N
Blue and blue
L
Black and brown
3.4 Assembly
If you install the hob under a hood, please see the installation instructions
of the hood for the minimum distance between the appliances.
Two-phase connection – 400 V 2 ~ N Green – yellow
Blue and blue
N
Black
L1
Brown
L2
min. 500mm
min. 50mm
Find the video tutorial “How to install your AEG Induction Hob – Worktop
installation” by typing out the full name indicated in the graphic below.
www.youtube.com/electrolux www.youtube.com/aeg
How to install your AEG Induction Hob – Worktop installation
If the appliance is installed above a drawer, the hob ventilation can warm up the items stored in the drawer during the cooking process.
PRODUCT DESCRIPTION
Cooking surface layout
1
1
1
1 Induction cooking zone 2 Control panel
1 2
4.2 Control panel layout
1 23 4 5
67
8
12
11 10 9
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate.
Sensor Function field
1
ON / OFF
Comment To activate and deactivate the hob.
2
Lock / Child Safety Device
To lock / unlock the control panel.
3
Pause
To activate and deactivate the function.
4
Bridge
To activate and deactivate the function.
567-
Heat setting display
To show the heat setting.
Timer indicators of cooking zones To show for which zone you set the time.
Timer display
To show the time in minutes.
32 ENGLISH
Sensor Function field
8
Hob²Hood
9
–
10
/
–
11
PowerBoost
12 –
Control bar
4.3 Heat setting displays
Comment
To activate and deactivate the manual mode of the function. To select the
cooking zone. To increase or decrease the time. To activate the function. To
set a heat setting.
Display –
+ digit / /
Description The cooking zone is deactivated. The cooking zone operates. Pause operates. Automatic Heat Up operates. PowerBoost operates. There is a malfunction. OptiHeat Control (3 step Residual heat indicator): continue cooking / keep warm / resid- ual heat. Lock / Child Safety Device operates. Incorrect or too small cookware or no cookware on the cooking zone. Automatic Switch Off operates.
4.4 OptiHeat Control (3 step Residual heat indicator)
WARNING! / / As long as the
indicator is on, there is a risk of burns from residual heat.
The induction cooking zones produce the heat necessary for the cooking process
directly in the bottom of the cookware. The glass ceramic is heated by the
heat of the cookware.
The indicators / / appear when a cooking zone is hot. They show the level of
the residual heat for the cooking zones you are currently using.
The indicator may also appear: · for the neighbouring cooking zones even
if you are not using them, · when hot cookware is placed on cold
cooking zone, · when the hob is deactivated but the
cooking zone is still hot.
ENGLISH 33
The indicator disappears when the cooking zone has cooled down.
5. DAILY USE
WARNING! Refer to Safety chapters.
5.1 Activating and deactivating
Touch for 1 second to activate or deactivate the hob.
5.2 Automatic Switch Off
The function deactivates the hob automatically if:
· all cooking zones are deactivated, · you do not set the heat setting after
you
activate the hob, · you spill something or put something on
the control panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic
signal sounds and the hob deactivates. Remove the object or clean the control
panel. · the hob gets too hot (e.g. when a saucepan boils dry). Let the
cooking zone cool down before you use the hob again. · you use incorrect
cookware. The symbol
comes on and the cooking zone deactivates automatically after 2 minutes. · you
do not deactivate a cooking zone or change the heat setting. After some time
comes on and the hob deactivates. The relation between the heat setting and
the time after which the hob deactivates:
Heat setting
, 1 – 3 4 – 7 8 – 9 10 – 14
The hob deactivates after 6 hours
5 hours 4 hours 1.5 hour
5.3 The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat setting or move your finger along
the control bar until you reach the correct heat setting.
5.4 Using the cooking zones
Place the cookware in the centre of the selected zone. Induction cooking zones
adapt to the dimension of the bottom of the cookware automatically. You can
cook with large cookware placed on two cooking zones at the same time. The
cookware must cover the centres of both zones but not go beyond the area
marking. If the cookware is located between the two centres, Bridge function
will not be activated.
5.5 Bridge
The function operates when the pot covers the centres of the two zones.
This function connects two left side cooking zones and they operate as one.
First set the heat setting for one of the left side cooking zones.
To activate the function: touch . To set or change the heat setting touch one
of the control sensors.
To deactivate the function: touch . The cooking zones operate independently.
5.6 Automatic Heat Up
Activate this function to get a desired heat setting in a shorter time. When
it is on, the zone operates on the highest setting in the beginning and then
continues to cook at the desired heating setting.
To activate the function the cooking zone must be cold.
To activate the function for a cooking zone: touch ( comes on). Immediately
touch a desired heat setting. After 3 seconds
comes on.
To deactivate the function: change the heat setting.
5.7 PowerBoost
This function makes more power available to the induction cooking zones. The
function can be activated for the induction cooking zone only for a limited
period of time. After this time the induction cooking zone automatically sets
back to the highest heat setting.
Refer to “Technical data” chapter.
To activate the function for a cooking zone: touch . comes on. To deactivate
the function: change the heat setting.
5.8 Timer
· Count Down Timer You can use this function to set the length of a single
cooking session.
First set the heat setting for the cooking zone, then set the function.
To set the cooking zone: touch repeatedly until the indicator of a cooking
zone appears.
To activate the function: touch of the timer to set the time (00 – 99
minutes). When the indicator of the cooking zone starts to flash, the time
counts down.
To see the remaining time: touch to set the cooking zone. The indicator of the
cooking zone starts to flash. The display shows the remaining time.
To change the time: touch to set the cooking zone. Touch or .
To deactivate the function: touch to set the cooking zone and then touch . The
remaining time counts down to 00. The indicator of the cooking zone
disappears.
When the countdown ends, an acoustic signal sounds and 00 flashes. The cooking
zone deactivates.
To stop the sound: touch . · CountUp Timer You can use this function to
monitor how long the cooking zone operates.
To set the cooking zone: touch repeatedly until the indicator of a cooking
zone appears.
To activate the function: touch of the timer. appears. When the indicator of
the cooking zone starts to flash, the time counts up. The display switches
between and the counted time (in minutes).
To see how long the cooking zone operates: touch to set the cooking zone. The
indicator of the cooking zone starts to
flash. The display shows how long the zone operates.
To deactivate the function: touch and then touch or . The indicator of the
cooking zone disappears. · Minute Minder You can use this function when the
hob is activated and the cooking zones do not operate. The heat setting
display shows .
To activate the function: touch and then touch or of the timer to set the
time. When the time finishes, an acoustic signal sounds and 00 flashes.
To stop the sound: touch .
The function has no effect on the operation of the cooking zones.
5.9 Pause
This function sets all cooking zones that operate to the lowest heat setting.
When the function operates, all other symbols on the control panels are
locked. The function does not stop the timer functions.
Press to activate the function. comes on. The heat setting is lowered to
1. To deactivate the function: press . The previous heat setting comes on.
5.10 Lock
You can lock the control panel while cooking zones operate. It prevents an
accidental change of the heat setting. Set the heat setting first.
To activate the function: touch . comes on for 4 seconds. The Timer stays on.
To deactivate the function: touch . The previous heat setting comes on.
When you deactivate the hob, you also deactivate this function.
5.11 Child Safety Device
This function prevents an accidental operation of the hob.
To activate the function: activate the hob with . Do not set any heat setting.
Touch
for 4 seconds. comes on. Deactivate the hob with .
To deactivate the function: activate the hob with . Do not set any heat
setting. Touch
for 4 seconds. comes on. Deactivate the hob with .
To override the function for only one cooking time: activate the hob with .
comes on. Touch for 4 seconds. Set the heat setting in 10 seconds. You can
operate the hob. When you deactivate the hob with the function operates again.
5.12 OffSound Control (Deactivating and activating the sounds)
Deactivate the hob. Touch for 3 seconds. The display comes on and goes out.
Touch
for 3 seconds. or comes on. Touch of the timer to choose one of the following:
· – the sounds are off · – the sounds are on To confirm your selection wait
until the hob deactivates automatically.
When the function is set to you can hear the sounds only when: · you touch ·
Minute Minder comes down · Count Down Timer comes down · you put something on
the control panel.
5.13 Power limitation
The hob is set to its highest possible power level by default.
To decrease or increase the power level: 1. Deactivate the hob.
36 ENGLISH
2. Press and hold for 3 seconds. The display comes on and goes off.
3. Press and hold for 3 seconds. or
appears.
4. Press . P72 appears.
5. Press / of the timer to set the power level.
Power levels
Refer to “Technical data” chapter.
CAUTION! Make sure that the selected power fits the house installation fuses.
· P72 — 7200 W · P15 — 1500 W · P20 — 2000 W · P25 — 2500 W · P30 — 3000 W ·
P35 — 3500 W · P40 — 4000 W · P45 — 4500 W · P50 — 5000 W · P60 — 6000 W
5.14 Power management
If multiple zones are active and the consumed power exceeds the limitation of
the power supply, this function divides the available power between all
cooking zones. The hob controls heat settings to protect the fuses of the
house installation.
· Cooking zones are grouped according to the location and number of the phases
in the hob. Each phase has a maximum electricity loading (3700 W). If the hob
reaches the limit of maximum available power within one phase or the selected
total power limit, the power of the cooking zones will be automatically
reduced.
· The heat setting of the cooking zone selected last is always prioritised.
The remaining power will be divided between the previously activated cooking
zones in reverse order of selection.
· The heat setting display of the reduced zones changes between the initially
selected heat setting and the reduced heat setting.
· Wait until the display stops flashing or reduce the heat setting of the
cooking zone selected last. The cooking zones will continue operating with the
reduced heat setting. Change the heat settings of the cooking zones manually,
if necessary.
Power management with Power limitation When you set the Power limitation
function to 6000 W or less, the power of the hob is divided among all cooking
zones. Refer to the illustration for possible combinations in which power can
be distributed among the cooking zones.
When you set the Power limitation function to more than 6000 W, the power of
the hob is divided among the sections indicated below.
5.15 Hob²Hood
It is an advanced automatic function which connects the hob to a special hood.
Both the hob and the hood have an infrared signal communicator. Speed of the
fan is defined automatically on basis of mode setting and temperature of the
hottest cookware on the hob. You can also operate the fan from the hob
manually.
ENGLISH 37
For most of the hoods the remote system is originally deactivated. Activate it
before you use the function. For more information refer to hood user manual.
Operating the function automatically To operate the function automatically set
the automatic mode to H1 H6. The hob is originally set to H5. The hood
reacts whenever you operate the hob. The hob recognizes temperature of the
cookware automatically and adjusts the speed of the fan.
Automatic modes
Automat- ic light
Boiling1)
Frying2)
Mode H0 Off
Off
Off
Mode H1 On
Off
Off
Mode
On
H2 3)
Fan speed Fan speed
1
1
Mode H3 On
Off
Fan speed
1
Mode H4 On
Fan speed Fan speed
1
1
Mode H5 On
Fan speed Fan speed
1
2
Mode H6 On
Fan speed Fan speed
2
3
- The hob detects the boiling process and acti- vates fan speed in accordance with automatic mode. 2) The hob detects the frying process and acti- vates fan speed in accordance with automatic mode. 3) This mode activates the fan and the light and does not rely on the temperature.
Changing the automatic mode 1. Deactivate the appliance.
2. Touch for 3 seconds. The display comes on and goes off.
3. Touch for 3 seconds.
4. Touch a few times until comes on.
5. Touch of the Timer to select an automatic mode.
To operate the hood directly on the hood panel deactivate the automatic mode
of the function.
When you finish cooking and deactivate the hob, the hood fan may still operate
for a certain period of time. After that time the system deactivates the fan
automatically and prevents you from accidental activation of the fan for the
next 30 seconds.
Operating the fan speed manually You can also operate the function manually.
To do that touch when the hob is active. This deactivates automatic operation
of the function and allows you to change the fan
speed manually. When you press you raise the fan speed by one. When you reach
an intensive level and press again you will set fan speed to 0 which
deactivates the hood fan. To start the fan again with fan
speed 1 touch .
To activate automatic operation of the function, deactivate the hob and
activate it again.
Activating the light You can set the hob to activate the light automatically
whenever you activate the hob. To do so set the automatic mode to H1 H6.
The light on the hood deactivates 2 minutes after deactivating the hob.
HINTS AND TIPS
WARNING! Refer to Safety chapters.
6.1 Cookware
For induction cooking zones a strong electro-magnetic field creates the heat
in the cookware very quickly.
Use the induction cooking zones with suitable cookware.
· The bottom of the cookware must be as thick and flat as possible.
· Ensure pan bases are clean and dry before placing on the hob surface.
· In order to avoid scratches, do not slide or rub the pot across the ceramic
glass.
Cookware material
· correct: cast iron, steel, enamelled steel, stainless steel, multi-layer
bottom (with a correct marking from a manufacturer).
· not correct: aluminium, copper, brass, glass, ceramic, porcelain.
Cookware is suitable for an induction hob if:
· water boils very quickly on a zone set to the highest heat setting.
· a magnet pulls on to the bottom of the cookware.
Cookware dimensions
· Induction cooking zones adapt to the dimension of the bottom of the cookware
automatically.
· The cooking zone efficiency is related to the diameter of the cookware. The
cookware with a diameter smaller than the minimum receives only a part of the
power generated by the cooking zone.
· For both safety reasons and optimal cooking results, do not use cookware
larger than indicated in “Cooking zones specification”. Avoid keeping cookware
close to the control panel during the
cooking session. This might impact the functioning of the control panel or
accidentally activate hob functions.
Refer to “Technical data”.
6.2 The noises during operation
If you can hear:
· crack noise: cookware is made of different materials (a sandwich
construction).
· whistle sound: you use a cooking zone with a high power level and the
cookware is made of different materials (a sandwich construction).
· humming: you use a high power level. · clicking: electric switching occurs.
· hissing, buzzing: the fan operates. The noises are normal and do not
indicate any malfunction.
6.3 Öko Timer (Eco Timer)
To save energy, the heater of the cooking zone deactivates before the count
down timer sounds. The difference in the operation time depends on the heat
setting level and the length of the cooking operation.
6.4 Examples of cooking applications
The correlation between the heat setting of a zone and its consumption of
power is not linear. When you increase the heat setting, it is not
proportional to the increase of the consumption of power. It means that a
cooking zone with the medium heat setting uses less than a half of its power.
The data in the table is for guidance only.
Heat setting
– 1 1 – 3
Use to:
Time (min)
Hints
Keep cooked food warm.
as neces- Put a lid on the cookware. sary
Hollandaise sauce, melt: butter, choco- 5 – 25 late, gelatine.
Mix from time to time.
ENGLISH 39
Heat setting 1 – 3 3 – 5
5 – 7 7 – 9 7 – 9 9 – 12
12 – 13 14
Use to:
Time (min)
Hints
Solidify: fluffy omelettes, baked eggs. 10 – 40
Cook with a lid on.
Simmer rice and milkbased dishes, heat up ready-cooked meals.
25 – 50
Add at least twice as much liquid as rice, mix milk dishes halfway through the procedure.
Steam vegetables, fish, meat.
20 – 45
Add a couple of tablespoons of liquid.
Steam potatoes.
20 – 60
Use max. ¼ l of water for 750 g of po- tatoes.
Cook larger quantities of food, stews and soups.
60 – 150
Up to 3 l of liquid plus ingredients.
Gentle fry: escalope, veal cordon bleu, as neces- Turn halfway through. cutlets, rissoles, sausages, liver, roux, sary eggs, pancakes, doughnuts.
Heavy fry, hash browns, loin steaks, steaks.
5 – 15
Turn halfway through.
Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.
Boil large quantities of water. PowerBoost is activated.
6.5 Hints and Tips for Hob²Hood
When you operate the hob with the function:
· Protect the hood panel from direct sunlight.
· Do not spot halogen light on the hood panel.
· Do not cover the hob control panel. · Do not interrupt the signal between
the
hob and the hood (e.g. with the hand, a cookware handle or a tall pot). See
the picture. The hood in the picture is only exemplary.
Other remotely controlled appliances may block the signal. Do not use any such
appliances near to the hob while Hob²Hood is on.
Cooker hoods with the Hob²Hood function To find the full range of cooker hoods
which work with this function refer to our consumer website. The AEG cooker
hoods that work
with this function must have the symbol .
40 ENGLISH
7. CARE AND CLEANING
WARNING! Refer to Safety chapters.
7.1 General information
· Clean the hob after each use. · Always use cookware with a clean base. ·
Scratches or dark stains on the surface
have no effect on how the hob operates. · Use a special cleaner suitable for
the
surface of the hob. · Use a special scraper for the glass.
7.2 Cleaning the hob
· Remove immediately: melted plastic, plastic foil, sugar and food with sugar,
otherwise, the dirt can cause damage to the hob. Take care to avoid burns. Use a special hob scraper on the glass surface at an acute angle and move the blade on the surface. · Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob with a moist cloth and a nonabrasive detergent. After cleaning, wipe the hob dry with a soft cloth. · Remove shiny metallic discoloration: use a solution of water with vinegar and clean the glass surface with a cloth.
8. TROUBLESHOOTING
WARNING! Refer to Safety chapters.
8.1 What to do if…
Problem You cannot activate or operate the hob.
You can hear a constant beep noise.
Possible cause
Remedy
The hob is not connected to an elec- Check if the hob is correctly connected trical supply or it is connected incor- to the electrical supply. rectly.
The fuse is blown.
Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician.
You do not set the heat setting for 10 seconds.
Activate the hob again and set the heat setting in less than 10 seconds.
You touched 2 or more sensor fields Touch only one sensor field. at the same time.
Pause operates.
Refer to “Daily use”.
There is water or fat stains on the control panel.
Clean the control panel.
The electrical connection is incor- rect.
Disconnect the hob from the electrical supply. Ask a qualified electrician to check the installation.
ENGLISH 41
Problem
Possible cause
Remedy
An acoustic signal sounds and the hob deactivates. An acoustic signal sounds when the hob is deactivated.
You put something on one or more sensor fields.
Remove the object from the sensor fields.
The hob deactivates.
You put something on the sensor field .
Remove the object from the sensor field.
Residual heat indicator does not come on.
The zone is not hot because it oper- If the zone operated sufficiently long to
ated only for a short time or the sen- be hot, speak to an Authorised Service
sor is damaged.
Centre.
You use a very tall pot which blocks Use a smaller pot, change the cooking
the signal.
zone or operate the hood manually.
Automatic Heat Up does not op- The zone is hot. erate.
Let the zone become sufficiently cool.
The highest heat setting is set.
The highest heat setting has the same power as the function.
The heat setting changes be- tween two levels.
Power management operates.
Refer to “Daily use”.
The control panel becomes hot to The cookware is too large or you put Put large cookware on the rear zones,
the touch.
it too close to the control panel.
if possible.
There is no sound when you touch the panel sensor fields.
The sounds are deactivated.
Activate the sounds. Refer to “Daily use”.
comes on.
Child Safety Device or Lock oper- ates.
Refer to “Daily use”.
comes on.
There is no cookware on the zone. Put cookware on the zone.
The cookware is unsuitable.
Use cookware suitable for induction hobs. Refer to “Hints and tips”.
The diameter of the bottom of the Use cookware with correct dimen- cookware is too small for the zone. sions. Refer to “Technical data”.
and a number come on.
There is an error in the hob.
Deactivate the hob and activate it
again after 30 seconds. If comes on again, disconnect the hob from the
electrical supply. After 30 seconds, connect the hob again. If the problem
continues, speak to an Authorised Service Centre.
8.2 If you cannot find a solution…
If you cannot find a solution to the problem yourself, contact your dealer or
an Authorised Service Centre. Give the data from the rating plate. Give also
three digit letter code for the glass ceramic (it is in the corner of the
glass surface) and an error
message that comes on. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period. The information about guarantee period and Authorised Service Centres are in the guarantee booklet.
42 ENGLISH
9. TECHNICAL DATA
9.1 Rating plate
Model IKE84443FB Typ 62 D4A 01 AD Induction 7.2 kW Ser.Nr. …………….. AEG
9.2 Cooking zones specification
PNC 949 597 458 00 220 – 240 V / 400 V 2N 50 – 60 Hz Made in: Germany 7.2 kW
Cooking zone
Left front Left rear Middle front Right rear
Nominal power (maximum heat setting) [W] 2300
2300
1400
2300
PowerBoost [W] 3200 3200 2500 3600
PowerBoost
Cookware diame-
maximum dura- ter [mm]
tion [min]
10
125 – 210
10
125 – 210
4
125 – 145
10
180 – 240
The power of the cooking zones can be different in some small range from the data in the table. It changes with the material and dimensions of the cookware.
For optimal cooking results use cookware no larger than the diameter in the table.
ENERGY EFFICIENCY
10.1 Product Information*
Model identification Type of hob Number of cooking zones Heating technology
Diameter of circular cooking zones (Ø)
Energy consumption per cooking zone (EC electric cooking)
Energy consumption of the hob (EC electric hob)
Left front Left rear Middle front Right rear
Left front Left rear Middle front Right rear
IKE84443FB
Built-In Hob
4
Induction
21.0 cm 21.0 cm 14.5 cm 24.0 cm
179.6 Wh / kg 177.0 Wh / kg 180.2 Wh / kg 174.6 Wh / kg
177.9 Wh / kg
ENGLISH 43
- For European Union according to EU 66/2014. For Belarus according to STB 2477-2017, Annex A. For Ukraine according to 742/2019.
EN 60350-2 – Household electric cooking appliances – Part 2: Hobs – Methods for measuring performance.
The energy measurements referring to the cooking area are identified by the markings of the respective cooking zones.
10.2 Energy saving
You can save energy during everyday cooking if you follow below hints.
· When you heat up water, use only the amount you need.
· If it is possible, always put the lids on the cookware.
· Before you activate the cooking zone put the cookware on it.
· Put the smaller cookware on the smaller cooking zones.
· Put the cookware directly in the centre of the cooking zone.
· Use the residual heat to keep the food warm or to melt it.
11. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of
appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>