Power Dynamics 172.782 PDX30 DI Box Stereo Instruction Manual

June 9, 2024
Power Dynamics

PDX30 DI Box Stereo
Ref. nr.: 172.782

INSTRUCTION MANUAL

172.782 PDX30 DI Box Stereo

Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

  • Prior to using the unit, please ask advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.

  • The unit contains voltage carrying parts. Therefore do NOT open the housing.

  • Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.

  •  Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.

  • If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.

  • To avoid fire and shock hazard, do not expose the unit to rain and moisture.

  • All repairs should be carried out by a qualified technician only.

  • If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the unit in humid rooms or outdoors.

  • To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.

  • Do not repeatedly switch the fixture on and off. This shortens the life time.

  • Keep the unit out of the reach of children. Do not leave the unit unattended.

  • Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from
    a specialist.

  • Do not force the controls.

  • This unit is with speaker inside which can cause magnetic field. Keep this unit at least 60cm away from computer or TV.

  • If this product have a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the product for a long period of time. Otherwise the battery may be permanently damaged.

  • If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.

  • Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.

  • Keep away from electronic equipment that may cause interference.

  • Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.

  • Keep the original packing material so that you can transport the unit in safe conditions.

** This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!
NOTE:** To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

OVERVIEW

  1. Ground/Lift switch
    Set the switch to the Ground position for normal operation (unpressed). To eliminate hum or buzz that’s caused by a ground loop, move the switch to the Lift position (pressed).

  2. Balanced XLR output
    Balanced outputs connect to the mic/line inputs of a sound mixer or PA system.

  3. Battery On/OFF switch
    Switch 9V battery On or Off. When switch is off and LED light up, 48V phantom power is receive.

  4. Input Jack 6.35mm (1/4”)
    The Jack 6.35mm (1/4”) can be used to connect an instrument such as a guitar or keyboard.

  5. Output Jack 6.35mm (1/4”)
    The Jack 6.35mm output connector for passing the input signal through to a stage amplifier or monitor system.

  6. -25dB Switch
    The switch attenuates the signal level from loud sources like an electric guitar or keyboard. Set the switch to O dB for normal operation. If you experience distortion, switch the pad to -25 dB..

  7. Battery compartment 9Volt

The PDX30 can operate on a 9 Volt battery or by using 24- 48 volt phantom power. Phantom power is available on the XLR cable (connected to the Balanced Output) the PDX30will automatically switch to phantom power and disconnect the 9 Volt battery.

TECHNICAL SPECIFICATION

Input connections : 6.3mm Jack
Output connections : 6.3mm Jack, XLR (3-pin)
Power supply : Phantom 12-48V
Dimensions (L x W x H)  : 120x120x40mm
Weight : 0,5kg

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
The products referred to in this manual is conforming European and UK legislation directives to which they are subject:

European Union
Tronios B.V.,
Bedrijvenpark Twente Noord 18,
7602KR Almelo, The Netherlands
2014/35/EU
2014/30/EU
2011/65/EC
United Kingdom
Tronios Ltd.,
130 Harley Street,
London W1G 7JU, United Kingdom
S.I. 2016:1101
S.I. 2016:1091
S.I. 2012:3032

Specifications and design are subject to change without prior notice.
www.tronios.com
Copyright © 2022 by Tronios The Netherlands

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Power Dynamics User Manuals

Related Manuals