HyperX HX434C16FB3A/8 8GB 1G x 64-Bit DDR4-3466 CL16 288-Pin DIMM Memory Module User Guide
- June 9, 2024
- HYPERX
Table of Contents
HX434C16FB3A/8 8GB 1G x 64-Bit DDR4-3466 CL16 288-Pin DIMM Memory Module
User Guide
DESCRIPTION
HyperX HX434C16FB3A/8 is a 1G x 64-bit (8GB) DDR4-3466 CL16 SDRAM (Synchronous
DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per
module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP)
2.0. Each module has been tested to run at DDR4-3466 at a low latency timing
of 16-18-18 at 1.35V. The SPDs are programmed to JEDEC standard latency
DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact
fingers. The JEDEC standard electrical and mechanical specifications are as
follows:
FACTORY TIMING PARAMETERS
| • Default (JEDEC): | DDR4-2400 CL17-17-17 @1.2V |
|---|---|
| • XMP Profile #1: | DDR4-3466 CL16-18-18 @1.35V |
| • XMP Profile #2: | DDR4-3000 CL15-17-17 @1.35V |
SPECIFICATIONS
| CL(IDD) | 17 cycles |
|---|---|
| Row Cycle Time (trimming) | 45.75ns(min.) |
| Refresh to Active/Refresh Command Time (tricin) | 350ns(min.) |
| Row Active Time (transman) | 32ns(min.) |
| UL Rating | 94 V – 0 |
| Operating Temperature | o° C to +70o |
| Storage Temperature | -40° C to +85 C |
FEATURES
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP = 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- On-Die termination (ODT)
- 16 internal banks; 4 groups of 4 banks each
- Bi-Directional Differential Data Strobe
- 8 bit pre-fetch
- Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
- Height 1.624” (41.24mm), w/heatsink
MODULE WITH HEAT SPREADER MODULE DIMENSIONS The product images shown
are for illustration purposes only and may not be an exact representation of
the product. Kingston reserves the right to change any information at anytime
without notice.
FOR MORE INFORMATION, GO TOHYPERXGAMING.COM
All Kingston products are tested to meet our published specifications. Some
motherboards or system configurations may not operate at the published HyperX
memory speeds and timing settings. Kingston does not recommend that any user
attempt to run their computers faster than the published speed. Overclocking
or modifying your system timing may result in damage to computer components.
the published HyperX memory speeds and timing settings. Kingston does not
recommend that any user attempt to run their computers faster than the
published speed. Overclocking or modifying your system timing may result in
damage to computer components.
HyperX is a division of Kingston.
©2019 Kingston Technology Corporation, 17600 Newhope Street, Fountain Valley,
CA 92708 USA.
All rights reserved. All trademarks and registered trademarks are the property
of their respective owners.
Document No. 4809140A
hyperxgaming.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>