V-TAC VT-2405 RF Controller Instruction Manual
- June 4, 2024
- V TAC
Table of Contents
V-TAC VT-2405 RF Controller Instruction Manual
TECHNICAL DATA
| Model | VT-2405 |
|---|---|
| Output | 3 Channels(One Group RGB) |
| Static Power Consumption | <1W |
| Output Current | 4A (Each Channel) |
| Output Power | 12V-144W, 24V-288W |
| Supply Voltage | DC: 12V, 24V |
INTRODUCTION AND WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the
best.
Please read these instructions carefully before starting the installation and
keep this manual handy for future reference. If you have any another query,
please contact our dealer or local vendor from whom you have purchased the
product. They are trained and ready to serve you at the best. The warranty is
valid for 2 years from the date of purchase. The warranty does not apply to
damage caused by incorrect installation or abnormal wear and tear. The company
gives no warranty against damage to any surface due to incorrect removal and
installation of the product. The products are suitable for 10-12 Hours Daily
operation. Usage of product for 24 Hours a day would void the warranty. This
product is warranted for manufacturing defects only.
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
This marking indicates that this product should not be disposed of with other household wastes.
Caution, risk of electric shock.
PRODUCT DESCRIPTION
- Adopts Capacitive Touch technology, ultra sensitive.
- With RF remote control, very easy to control RGB LED strips like 5050, 3528, etc.
- With brightness, color and speed adjustable and according to different needs.
- Full color wheel for convenient operation.
- With auto sleep and wake up function, low power consumption and energy conservation.
- Small size and long service life.
- Auto memorizing function, saving your last setting.
- This products Input voltage is DC12V~24V. Other input voltages are not allowed.
- Lead wire should be connected correctly, according to the wire color and the connecting diagram offers.
- Overloads are prohibited.
The dynamic modes are as below.
TABLE 1
NO
|
Mode
|
NO
| Mode| NO| mode
---|---|---|---|---|---
1| Three-color gradual changing| 7| Yellow strobe-flash| 13|
Blue cross-fade
2
| Seven-color jumpy changing| 8| Cyan strobe-flash| 14| Yellow cross-fade
3| Seven-color gradual changing| 9| Purple strobe-flash| 15|
Cyan cross-fade
4
| Red strobe-flash| 10| White strobe-flash| 16| Purple cross-fade
5| Green strobe-flash| 11| Red cross-fade| 17|
White cross-fade
6
| Blue strobe-flash| 12| Green cross-fade| |
REMOTE CONTROL FUNCTION INSTRUCTION
TABLE 2
| BUTTON | FUNCTION |
|---|---|
| Switch for power on and off. The left button is OFF and the right bu on is |
ON.
| The top button is Mode + used to go to the next static mode
The bottom button is Mode – used to go back to the previous mode.
|
The color wheel is used to change station colors.
| Used to increase
the brightness.
| Used to decrease the brightness.
CONNECTION
CAUTION
- This products Input voltage is DC12V~24V. Other input voltages are not allowed.
- Lead wire should be connected correctly, according to the wire color and the connecting diagram offers.
- Overloads are prohibited.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B