hp Z4N74AA 27 Curved Display Monitor User Guide
- June 9, 2024
- HP
Table of Contents
Z4N74AA 27 Curved Display Monitor
User Guide
Z4N74AA 27 Curved Display Monitor
© Copyright 2017 HP Development Company, L.P.
FreeSync and Radeon are trademarks of Advanced Micro Devices, Inc. HDMI, the
HDMI
Logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC. Windows is either a registered trademark or
trademark of Microsoft Corporation in the United States and/or other
countries.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should be
construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
First Edition: February 2017
Document Part Number: 917420-001
About This Guide
This guide provides information on monitor features, setting up the monitor,
using the software and technical specifications.
WARNING! Text set off in this manner indicates that failure to follow
directions could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow
directions could result in damage to equipment or loss of information.
NOTE: Text set off in this manner provides important supplemental
information.
TIP: Text set off in this manner provides helpful hints.
This product incorporates HDMI technology.
Getting Started
Important safety information
A power cord is included with the monitor. If another cord is used, use only a
power source and connection appropriate for this monitor. For information on
the correct power cord set to use with the monitor, refer to the Product
Notices provided on your optical disc, if one is included, or in your
documentation kit.
WARNING! To reduce the risk of electric shock or damage to the equipment:
- Plug the power cord into an AC outlet that is easily accessible at all times.
- Disconnect power from the computer by unplugging the power cord from the AC outlet.
- If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature.
For your safety, do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the AC outlet, grasp the cord by the plug.
To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup, posture, and health and work habits for computer users. The Safety & Comfort Guide also provides important electrical and mechanical safety information. The Safety & Comfort Guide is located on the Web at http://www.hp.com/ergo.
CAUTION: For the protection of the monitor, as well as the computer,
connect all power cords for the computer and its peripheral devices (such as a
monitor, printer, scanner) to some form of surge protection device such as a
power strip or Uninterruptible Power Supply (UPS). Not all power strips
provide surge protection; the power strips must be specifically labeled as
having this ability. Use a power strip whose manufacturer offers a Damage
Replacement Policy so you can replace the equipment, if surge protection
fails.
Use the appropriate and correctly sized furniture designed to properly support
your HP LCD monitor.
WARNING! LCD monitors that are inappropriately situated on dressers,
bookcases, shelves, desks, speakers, chests, or carts may fall over and cause
personal injury.
Care should be taken to route all cords and cables connected to the LCD
monitor so that they cannot be pulled, grabbed, or tripped over.
NOTE: This product is suitable for entertainment purposes. Consider
placing the monitor in a controlled
luminous environment to avoid interference from surrounding light and bright
surfaces that may cause
disturbing reflections from the screen.
Product features and components
Features
This product is an AMD FreeSync™–qualified monitor, which allows you to enjoy
PC gaming with smooth, responsive, tear-free performance whenever a picture
changes on the screen. The external source connected to your monitor must
have the FreeSync driver installed.
AMD FreeSync technology is designed to eliminate stuttering and tearing in
games and videos by locking a monitor’s refresh rate to the frame rate of the
graphics card. Check with the manufacturer of your component or system for
specific capabilities.
IMPORTANT: AMD Radeon™ Graphics and/or AMD A-Series APU-compliant
monitors with DisplayPort/HDMI Adaptive-Sync required. AMD 15.11 Crimson
driver (or newer) is required to support FreeSync over HDMI.
NOTE: Adaptive refresh rates vary by monitor. More information is
available at www.amd.com/freesync.
To enable FreeSync on the monitor, press the Menu button on the monitor to
open the on-screen display (OSD) menu. Select Color Control, select Viewing
Modes, and then select Gaming.
The light-emitting diode (LED) backlit monitor has an active matrix, VA
(vertical alignment) panel. The monitor features include the following:
- 68.59 cm (27-inch) curved 1800r with 1920 x 1080 FHD resolution, plus full-screen support for lower resolutions
- Tilt capability and easy viewing from sitting or standing position, or while moving from one side of the monitor to the other
- HDMI (High-Definition Multimedia Interface) video input
- DisplayPort video input
- Plug and Play capability if supported by your operating system
- On-screen display (OSD) adjustments in 10 languages for easy setup and screen optimization
- My Display software for adjusting monitor settings through Windows®
- HDCP (High-bandwidth Digital Content Protection) used on digital inputs
- Software and documentation optical disc provided with the monitor in select regions that includes monitor drivers and product documentation
- VESA mounting bracket for attaching the monitor to a wall-mount device or swing arm
- Low Blue Light Mode settings to create a more relaxing and less stimulating image
NOTE: For safety and regulatory information, refer to the Product Notices provided on your optical disc, if one is included, or in your documentation kit. To locate updates to the user guide for your product, go to http://www.hp.com/support. Select Find your product, and then follow the on- screen instructions.
Rear components
Component | Function |
---|---|
1 | Menu/OK button |
If the OSO menu is closed, press to open the OSO menu.
2| Plus/Up/Next Input Port button| If the OSO menu is open, press to navigate
forward through the OSD menu and increase adjustment levels.
If the 050 menu is closed, press to switch the monitor’s input source to the
next active input.
3| Minus/Down/Viewing Modes button| If the OSO menu is open, press to navigate
forward through the OSD menu and decrease adjustment levels.
If the 050 menu is closed, press to open the Viewing Modes menu.
4| Exit/Back/Information button| If the 050 menu is open, press to exit the
OSD menu or back up a level. If the OSO menu is closed, press to open the
Information menu.
S| Power button| Turns the monitor on or off.
6| Power connector| Connects an AC adapter to the monitor.
7| DisplayPort| Connects a DisplayPort cable to the source device.
8| HDMI port| Connects an HDMI cable to the source device.
9| Audio-out (headphone) jack| Connects optional powered stereo speakers or
headphones to the monitor.
WARNING! To reduce the risk of personal injury, adjust the volume before
using headphones, earbuds, or a headset. For additional safety information,
see the Product Notices provided on the optical disc, if one is included with
your product.
NOTE When a device is connected to a headphone jack, the speakers are
disabled.
10| Security cable slot| Attaches an optional security cable to the monitor.
NOTE: * Buttons 2–4 are function buttons that can be changed from their default settings in the OSD menu to a different menu selection that you most commonly use and want to quickly access. See Assigning the Function buttons on page 14 for more information.
Front components
The power light is located on the front bezel of the monitor. When
illuminated, indicates that monitor power is on.
Setting up the monitor
Attaching the monitor stand
CAUTION: Do not touch the surface of the LCD panel. Pressure on the panel
may cause nonuniformity of color or disorientation of the liquid crystals. If
this occurs, the screen will not recover to its normal condition..
TIP: Consider the placement of the monitor, because the bezel might cause
interfering reflections from surrounding light and bright surfaces.
-
Position the monitor on a level surface with the bottom side up.
CAUTION: Do not lay the monitor facedown when reinstalling the stand. Stress on the curvature of the monitor panel may damage the panel if the monitor is placed facedown. -
Slide the base onto the stand and press firmly to lock it in place..
Connecting the cables
NOTE: The monitor ships with select cables. Not all cables shown in this
section are included with the monitor.
-
Place the monitor in a convenient, well-ventilated location near the computer.
-
Connect a video cable to the video input port.
NOTE: The monitor automatically determines which inputs have valid video signals. The inputs can be selected by pressing the Menu button and selecting Input Control.
● Connect one end of an HDMI cable to the HDMI port on the back of the monitor and the other end to the source device.
● Connect one end of a DisplayPort cable to the DisplayPort on the rear of the monitor and the other end to the source device.
-
Connect one end of the power cord to the AC adapter (1), and the other end of the power cord to a grounded AC outlet (2). Then, connect the AC adapter to the monitor (3).
WARNING! To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
Plug the power cord into a grounded (earthed) AC outlet that is easily
accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the AC
outlet.
For your safety, do not place anything on power cords or cables. Arrange them
so that no one may accidentally step on or trip over them. Do not pull on a
cord or cable. When unplugging the power cord from the AC outlet, grasp the
cord by the plug.
Adjusting the monitor
Tilt the monitor panel forward or backward to set it to a comfortable eye
level.
Turning on the monitor
- Press the power button on the source device to turn it on.
- Press the Power button on the rear of the monitor to turn it on.
CAUTION: Burn-in image damage may occur on monitors that display the same
static image on the screen for 12 consecutive hours of non-use. To avoid burn-
in image damage on the monitor screen, you should always activate a screen
saver application or turn off the monitor when it is not in use for a
prolonged period of time.
Image retention is a condition that may occur on all LCD screens. Monitors
with a “burned-in image” are not covered under the HP warranty.
NOTE: If pressing the Power button has no effect, the Power Button
Lockout feature may be enabled. To disable this feature, press and hold the
Power button for 10 seconds.
NOTE: You can disable the power light in the OSD menu. Press the Menu
button on the rear of the monitor, select Power Control, select Power LED, and
then select Off.
When the monitor is powered on, a Monitor Status message is displayed for five
seconds. The message shows which input is the current active signal, the
status of the auto- switch source setting (On or Off; factory default is On),
the current preset screen resolution, and the recommended preset screen
resolution.
The monitor automatically scans the signal inputs for an active input and uses
that input.
Mounting the monitor
The monitor panel can be attached to a wall, swing arm, or other mounting
fixture.
NOTE: This apparatus is intended to be supported by a UL or CSA Listed
wall-mount bracket.
If the monitor is TCO certified, the power cord plugged into the monitor panel
must be a shielded power cable.
The use of a shielded power cable meets the TCO Certified criteria for display
products. For information on TCO requirements, go to
www.tcodevelopment.com.
CAUTION: This monitor supports the VESA industry standard 100 mm mounting
holes. To attach a third-party mounting solution to the monitor, four 4 mm,
0.7 pitch, and 10 mm long screws are required. Longer screws must not be used
because they may damage the monitor. It is important to verify that the
manufacturer’s mounting solution is compliant with the VESA standard and is
rated to support the weight of the monitor display panel. For best
performance, it is important to use the power and video cables provided with
the monitor.
Removing the monitor stand
You can remove the monitor from the stand to mount the monitor on a wall, a
swing arm, or other mounting fixture.
CAUTION: Before beginning to disassemble the monitor, be sure the monitor
is turned off and all cables are disconnected.
-
Position the monitor on a level surface with the bottom side up.
CAUTION: The screen is fragile. Avoid touching or applying pressure to the screen; doing so can cause damage. Do not lay the monitor facedown when reinstalling the stand. Stress on the curvature of the monitor panel may damage the panel if the monitor is placed facedown. -
Press the release button on the base (1). Then remove the base from the stand (2)
-
Hold the stand and remove the screws (1) that secure the stand to the monitor. Then lift the stand away from the monitor (2).
Attaching the VESA mounting bracket
A VESA mounting bracket is included with the monitor for use when attaching
the monitor panel to a wall, swing arm, or other mounting fixture.
-
Remove the monitor from the stand. Refer to Removing the monitor stand on page 9.
-
Attach the VESA mounting bracket by aligning the screw holes on the VESA mounting bracket with the screw holes on the monitor (1) and tightening the screws (2).
-
Secure the mounting plate to the wall or swing arm of your choice using the four screws included with the VESA mounting bracket.
Installing a security cable
You can secure the monitor to a fixed object with an optional security cable
available from HP.
Using the monitor
Software and utilities
The optical disc, if one is included with the monitor, contains files you can
install on the computer. If you do not have an optical drive, you can download
the files from http://www.hp.com/support.
- INF (Information) file
- ICM (Image Color Matching) files (one for each calibrated color space)
- My Display software
The Information file
The INF file defines monitor resources used by Windows® operating systems to
ensure monitor compatibility with the computer’s graphics adapter.
This monitor is Windows Plug and Play–compatible and the monitor will work
correctly without installing the INF file. Monitor Plug and Play compatibility
requires that the computer’s graphic card is VESA DDC2–compliant and that the
monitor connects directly to the graphics card. Plug and Play does not work
through separate BNC-type connectors or through distribution buffers/boxes.
The Image Color Matching file
The ICM files are data files that are used in conjunction with graphics
programs to provide consistent color matching from monitor screen to printer,
or from scanner to monitor screen. This file is activated from within
graphics programs that support this feature.
NOTE: The ICM color profile is written in accordance with the
International Color Consortium (ICC) Profile Format specification.
Installing the INF and ICM files
After you determine that you need to update, use one of the following methods
to install the files.
Installing from the optical disc (available in select regions)
To install the INF and ICM files on the computer from the optical disc:
- Insert the optical disc in the computer optical drive. The optical disc menu is displayed.
- View the HP Monitor Software Information file.
- Select Install Monitor Driver Software.
- Follow the on-screen instructions.
- Ensure that the proper resolution and refresh rates appear in the Windows Display control panel.
Downloading from the Web
If you do not have a computer or a source device with an optical drive, you
can download the latest version of INF and ICM files from the HP monitors
support website.
- Go to http://www.hp.com/support.
- Select Get software and drivers.
- Follow the on-screen instructions to select your monitor and download the software.
Using the on-screen display (OSD) menu
Use the OSD menu to adjust the monitor screen image based on your preferences.
You can access and make adjustments in the OSD menu using the buttons on the
monitor’s bezel.
To access the OSD menu and make adjustments, do the following:
- If the monitor is not already on, press the Power button to turn on the monitor.
- Press the Menu button to open the OSD.
- Use the menu options to navigate, select, and adjust the menu choices. The options are variable depending on the menu or sub-menu that is active.
The following table lists the menu selections in the OSD menu.
Main Menu | Description |
---|---|
Brightness | Adjusts the brightness level of the screen. The factory default is |
- Contrast| Adjusts the contrast level of the screen. The factory default is 80.
Color Control| Selects and adjusts the screen color.
Input Control| Selects the video input signal.
Image Control| Adjusts the screen image.
Power Control| Adjusts the power settings.
Menu Control| Adjusts the OSD controls.
Management| Adjusts the DDC/CI settings and returns all OSD menu settings to the factory default settings.
Language| Selects the language in which the OSD menu is displayed. The factory default is English.
Information| Selects and displays important information about the monitor.
Exit| Exits the OSD menu screen.
Assigning the Function buttons
Pressing one of the back bezel Function buttons activates the buttons and
displays the icons beside the buttons.
The factory default button icons and functions are shown below.
Button | Function |
---|---|
1 Menu/OK | Opens the OSD (On-Screen Display) menu. |
2 Next Input Port | Switches the monitor’s input source to the next active |
input..
3 Viewing Modes| Opens the Viewing Modes menu.
4 Information| Opens the Information menu.
You can change the Function buttons from their default values so that when the
buttons are activated you can quickly access commonly used menu items.
To assign the Function buttons:
- Press one of the four back bezel buttons to activate the buttons, and then press the Menu button to open the OSD.
- In the OSD menu, select Menu Control > Assign Buttons and then select one of the available options for the button you want to assign.
NOTE: You can only assign the three Function buttons. You can not reassign the Menu button or the Power button.
Adjusting to Low Blue Light Mode
Decreasing the blue light emitted by the display reduces the blue light
exposure to your eyes. HP monitors provide a setting to reduce blue light
output and create a more relaxing and less stimulating image while reading
content on the screen.
To adjust the blue light output from the display:
-
Press the Viewing Mode button.
-
Select your desired setting:
● Low Blue Light: reduces blue light for improved eye comfort
● Reading: optimizes blue light and brightness for indoor viewing
● Night: adjusts to the lowest blue light and reduces the impact on sleep -
Select Save and Return to save your setting and close the Viewing Mode menu. Select Cancel if you don’t want to save the setting.
-
Select Exit from the Main menu.
Using Auto-Sleep Mode
The monitor supports an OSD option called Auto-Sleep Mode that allows you to
enable or disable a reduced power state for the display. When Auto-Sleep Mode
is enabled (enabled by default), the monitor will enter a reduced power state
when the host PC signals low power mode (absence of either horizontal or
vertical sync signal).
Upon entering this reduced power state (sleep mode), the monitor screen is
blanked, the backlight is turned off, and the power LED indicator turns amber.
The monitor draws less than 0.5 W of power when in this reduced power state.
The monitor will wake from sleep mode when the host PC sends an active signal
to the monitor (for example, if you activate the mouse or keyboard).
You can disable Auto-Sleep Mode in the OSD menu. Press the Menu button to open
the OSD menu. Select Power Control, select Auto-Sleep Mode, and then select
Off.
Support and troubleshooting
Solving common problems
The following table lists possible problems, the possible cause of each
problem, and the recommended solutions.
Problem | Possible Cause | Solution |
---|---|---|
Screen is blank or video is flashing. | Power cord is disconnected. | Connect |
the power cord.
| Power button is turned off.| Press the back bezel Power button.
NOTE: If pressing the Power button has no effect, press and
hold the Power button for 10 seconds to disable the Power Button Lockout
feature.
| Video cable is improperly connected.| Connect the video cable properly.
Refer to Connecting the
cables on page 6 for more information.
| System is in sleep mode.| Press any key on the keyboard or move the mouse to
inactivate the screen blanking utility.
| Video card is incompatible.| Open the OSD menu and select the Input Control
menu. Set Auto-Switch Input to Off and manually select the input.
Image appears blurred, indistinct, or too dark.| Brightness is too low.| Open
the OSD menu and select Brightness to adjust the brightness scale as needed.
Input Signal Not Found is displayed on the screen.| Monitor video cable is
disconnected.| Connect the appropriate video signal cable between the computer
and monitor. Be sure that the computer power is off while connecting the video
cable.
Input Signal Out of Range is displayed on screen.| Video resolution and/or
refresh rate are set higher than what the monitor supports.| Change the
settings to a supported setting (see Preset display
resolutions on page 22).
The monitor is off but it did not seem to enter into a low- power sleep mode.|
The monitor’s power saving control is disabled.| Open the OSD menu and select
Power Control. select Auto-Sleep Mode, and then set auto-sleep to On.
OSD Lockout is displayed.| The monitor’s OSD Lockout function is enabled.|
Press and hold the Menu button on the rear panel for 10 seconds to disable the
OSD Lockout function.
Power Button Lockout is displayed.
/| The monitor’s Power Button Lockout feature is enabled.| Press and hold the
Power button for 10 seconds to unlock the Power button function.
Button lockouts
Holding down the Power button or Menu button for ten seconds will lock out the
functionality of the buttons. You can restore the functionality by holding the
buttons down again for ten seconds. This functionality is only available when
the monitor is powered on, displaying an active signal, and the OSD is not
open.
Product support
For additional information on using your monitor, go to
http://www.hp.com/support. Select Find your product, and then follow the on-
screen instructions.
NOTE: The monitor user guide, reference material, and drivers are
available at http://www.hp.com/support.
Here you can:
-
Chat online with an HP technician
NOTE: When support chat is not available in a particular language, it is available in English. -
Locate an HP service center
Preparing to call technical support
If you cannot solve a problem using the troubleshooting tips in this section,
you may need to call technical support. Have the following information
available when you call:
- Monitor product number
- Monitor serial number
- Purchase date on invoice
- Conditions under which the problem occurred
- Error messages received
- Hardware configuration
- Name and version of the hardware and software you are using
Locating the rating labels
The rating labels on the monitor provide the product number and serial number.
You may need these numbers when contacting HP about the monitor model. The two
rating labels are located on the rear of the monitor.
Maintaining the monitor
Maintenance guidelines
To enhance the performance and extend the life of the monitor:
-
Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider.
-
Use only a power source and connection appropriate for this monitor, as indicated on the label/back plate of the monitor.
-
Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the AC outlet, and the total ampere rating of the products connected to the cord does not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS or A) for each device.
-
Install the monitor near an outlet that you can easily reach. Disconnect the monitor by grasping the plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord.
-
Turn the monitor off when not in use. You can substantially increase the life expectancy of the monitor by using a screen saver program and turning off the monitor when not in use.
NOTE: Monitors with a “burned-in image” are not covered under the HP warranty. -
Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings.
-
Do not drop the monitor or place it on an unstable surface.
-
Do not allow anything to rest on the power cord. Do not walk on the cord.
-
Keep the monitor in a well-ventilated area, away from excessive light, heat, or moisture.
-
When removing the monitor stand, you must lay the monitor facedown on a soft area to prevent it from getting scratched, defaced, or broken.
Cleaning the monitor
- Turn off the monitor and unplug the power cord from the back of the unit.
- Dust the monitor by wiping the screen and the cabinet with a soft, clean antistatic cloth.
- For more difficult cleaning situations, use a 50/50 mix of water and Isopropyl alcohol.
CAUTION: Spray the cleaner onto a cloth and use the damp cloth to gently
wipe the screen surface. Never spray the cleaner directly on the screen
surface. It may run behind the bezel and damage the electronics.
CAUTION: Do not use cleaners that contain any petroleum based materials
such as benzene, thinner, or any
volatile substance to clean the monitor screen or cabinet. These chemicals may
damage the monitor.
Shipping the monitor
Keep the original packing box in a storage area. You may need it later if you
move or ship the monitor.
Technical specifications
NOTE: All specifications represent the typical specifications provided by
HP’s component manufacturers; actual performance may vary either higher or
lower.
For the latest specifications or additional specifications on this product, go
to http://www.hp.com/go/quickspecs/ and search for your specific monitor
model to find the model-specific QuickSpecs.
Display Type | 68.59 an wide screen VA | 27—inch wide screen VA |
---|---|---|
Viewable Image size | 68.59 an diagonal | 27—inch diagonal |
Tilt | -5° to 12.5° | |
Weight | 5.5 kg | 12.1 lbs |
Dimensions
Height Depth Width| 43.85 cm
16.89 cm
6133 cm| 17.26 in 6.65 in
24.15 in
Ma)dmum graphic resolution| 1920 x 1080 (60 Hz)|
Optimum grapNc resolution| 1920 x 1080 (60 Hz)|
Dot pitch| 0.2745 mm|
Pbcels per inch| 92 PPI|
Horizontal frequency HDMI
DP| 30 kHz to 85 kHz
85 kHz to 85 kHz|
Vertical refresh rate| 48 Hz to 76 Hz|
Environmental requirements temperature
Operating temperature Storage temperature| 5°C to 35°C -20°C to 60°C| 41°F to
95°F -4°F to 140°F
Relative humidity| 20% to 70%|
Power source| 100 V ac to 240 V ac 50/60 Hz|
Altitude:
Operating Storage| 0 m to 5,000 m Om to 12,192 m| 0 to 16,400 ft
0 to 40,000 ft
Preset display resolutions
The display resolutions listed below are the most commonly used modes and are
set as factory defaults. This monitor automatically recognizes these preset
modes and they will appear properly sized and centered on the screen.
Preset | Pixel format | Horz freq (kHz) | Vert freq (Hz) |
---|---|---|---|
1 | 640 x 480 | 31. | 60. |
2 | 720 x 480 | 31. | 59.940 |
3 | 800 x 600 | 38. | 60. |
4 | 1024 x 768 | 48. | 60. |
S | 1280 x 720 | 45 | 60 |
6 | 1280 x 800 | 50. | 60. |
7 | 1280 x 1024 | 64. | 60. |
8 | 1440 x 900 | 55. | 56. |
9 | 1600 x 900 | 60 | 60 |
10 | 1680 x 1050 | 65. | 60. |
11 | 1920 x 1080 | 68. | 60 |
Preset | Timing name | Pixel format | Horz freq (kHz) |
Vert freq (Hz)
---|---|---|---|---
1| 480p| 720 x 480| 31.| 60
2| 576p| 720 x 576| 31.| 50
3| 720p50| 1280 x 720| 38.| 50
4| 720p60| 1280 x 720| 45| 60
S| 1080p60| 1920 x 1080| 68.| 60
6| 1080p50| 1920 x 1080| 56.| 50
Entering user modes
The video controller signal may occasionally call for a mode that is not
preset if:
- You are not using a standard graphics adapter.
- You are not using a preset mode.
If this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen display. Your changes can be made to any or all of these modes and saved in memory. The monitor automatically stores the new setting, and then recognizes the new mode just as it does a preset mode. In addition to the factory preset modes, there are at least 10 user modes that can be entered and stored.
Power adapter
Manufacturer | Model number | Power supply rating |
---|---|---|
Delta Electronics (JIANGSU) Ltd. | TPC-DA58 | 19.5 V dc/3.33 A |
Chicony Power Technology Co., Ltd. | TPC-CA58 | 19.5 V dc/3.33 A |
Energy saver feature
The monitor supports a reduced power state. The reduced power state will be
entered into if the monitor detects the absence of either the horizontal sync
signal or the vertical sync signal. Upon detecting the absence of these
signals, the monitor screen is blanked, the backlight is turned off, and the
power light turns amber. When the monitor is in the reduced power state, the
monitor will utilize <0.5 watts of power. There is a brief warm-up period
before the monitor will return to its normal operating state.
Refer to the computer manual for instructions on setting the energy saver mode
(sometimes called power management feature).
NOTE: The above power saver feature only works when the monitor is
connected to a computer that has energy saver features.
By selecting the settings in the monitor’s Sleep Timer utility, you can also
program the monitor to enter into the reduced power state at a predetermined
time. When the monitor’s Sleep Timer utility causes the monitor to enter the
reduced power state, the power light blinks amber.
B Accessibility
HP designs, produces, and markets products and services that can be used by
everyone, including people with disabilities, either on a stand-alone basis or
with appropriate assistive devices.
Supported assistive technologies
HP products support a wide variety of operating system assistive technologies
and can be configured to work with additional assistive technologies. Use the
Search feature on your source device that is connected to the monitor to
locate more information about assistive features.
NOTE: For additional information about a particular assistive technology
product, contact customer support for that product.
Contacting support
We are constantly refining the accessibility of our products and services and
welcome feedback from users. If you have an issue with a product or would like
to tell us about accessibility features that have helped you, please contact
us at 888-259-5707, Monday through
Friday, 6 a.m. to 9 p.m. Mountain Time. If you are deaf or hardof-hearing and
use
TRS/VRS/WebCapTel, contact us if you require technical support or have
accessibility questions by calling
877-656-7058, Monday through Friday, 6
a.m. to 9 p.m. Mountain Time.
References
- index | HP® Official Site
- hp.com/support
- TCO Certified - the world’s leading sustainability certification for IT products
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>