HYPERX HX426C16FB3/32 32GB 4G x 64-Bit RAM Memory User Guide
- June 9, 2024
- HYPERX
Table of Contents
HYPERX HX426C16FB3/32 32GB 4G x 64-Bit RAM Memory
DESCRIPTION
HyperX HX426C16FB3/32 is a 4G x 64-bit (32GB) DDR4-2666 CL16 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 2G x 8-bit FBGA components per module. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2666 at a low latency timing of 16-18-18 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:
Note: The PnP feature offers a range of speed and timing options to support the widest variety of processors and chipsets. Your maximum speed will be determined by your BIOS.
FACTORY TIMING PARAMETERS
- Default (Plug N Play): DDR4-2666 CL16-18-18 @1.2V
- XMP Profile #1: DDR4-2666 CL16-18-18 @1.2V
SPECIFICATIONS
- CL(IDD) : 16 cycles
- Row Cycle Time (tRCmin) : 45ns(min.)
- Refresh to Active/Refresh : 350ns(min.)
- Command Time (tRFCmin)
- Row Active Time (tRASmin) : 27ns(min.)
- UL Rating : 94 V – 0
- Operating Temperature : 0o C to +85o C
- Storage Temperature : -55o C to +100o C
FEATURES
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP = 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- On-Die termination (ODT)
- 16 internal banks; 4 groups of 4 banks each
- Bi-Directional Differential Data Strobe
- 8 bit pre-fetch
- Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
- Height 1.3425” (34.1mm), w/heatsink
MODULE WITH HEAT SPREADER
MODULE DIMENSIONS
All measurements are in millimeters.
(Tolerances on all dimensions are ±0.12 unless otherwise specified)
The product images shown are for illustration purposes only and may
not be an exact representation of the product. Kingston reserves the right to
change any information at anytime without notice.
FOR MORE INFORMATION, GO TO HYPERXGAMING.COM
All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not operate at the published HyperX memory speeds and timing settings. Kingstonthe published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to run their computerdoes not recommend that any user attempt to run their computers s faster than the published speed. Overclocking or modifying yourfaster than the published speed. Overclocking or modifying your system timing may result in damage to computer components.system timing may result in damage to computer components.
HyperX is a division of Kingston.
©2019 Kingston Technology Corporation, 17600 Newhope Street, Fountain Valley,
CA 92708 USA.
All rights reserved. All trademarks and registered trademarks are the property
of their respective owners.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>