OLIGHT Olantern Classic 2 Lite Lantern User Manual

: June 9, 2024
: OLIGHT

Table of Contents

Introduction
IN THE BOX
SPECIFICATIONS
PRODUCT OVERVIEW
BATTERY INSTALLATION
BATTERY INDICATOR
HOW TO OPERATE
WARRANTY
Documents / Resources

OLIGHT Olantern Classic 2 Lite Lantern User Manual

Introduction

Thank you for purchasing this Olight Product. Please read this manual carefully before use and keep it for future reference!

IN THE BOX

Olantern Classic 2 Lite
4*AA Batteries

SPECIFICATIONS

WARM WHITE LIGHT MODE

HIGH: 240 lumens
LOW: 120 lumens

ORANGE LIGHT MODE

HIGH: 130 lumens
LOW: 10 lumens

Symbols

11m| 30cd| IPX5| (D)124(H)186mm (D)4.88(H)7.32in| 654g/23.1oz (Including Batteries)
---|---|---|---|---

All above specifications are test results based on ANSI/NEMA FL1-2009 Standard.

PRODUCT OVERVIEW

Product Overview

BATTERY INSTALLATION

Before first use, please unscrew the battery cover switch clockwise to open the battery cover, insert the 4 batteries as indicated, and then close the battery cover and tighten the switch counterclockwise.
Battery Installation

BATTERY INDICATOR

While powered on or dimming, the indicator below the rotary knob indicates the battery level.
Battery Indicator

DANGER

DO NOT shine the light directly into human eyes. This may cause temporary blindness or permanent damage to the eyes.
Corroded or leaking batteries must be removed and disposed of immediately. They may cause damage to the electronics or irritation to skin.

WARNING

DO NOT place the product in any dusty environment. Otherwise, the dust may enter the rotary knob switch and cause it to malfunction.
DO NOT disassemble the product.
DO NOT immerse the product in seawater or other corrosive media to avoid damage to the product.

NOTICE

Please keep the product away from radios, as the PWM modulation of the rotary knob may cause noise to the radio signals.
If the product is left unused, please remove the alkaline batteries and store them separately.
Please prevent it from falling and handle it with care.

EXCLUSION CLAUSE
Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual.

HOW TO OPERATE

ON/OFF: Turn on by rotating the rotary knob clockwise and turn off by rotating counter-clockwise
Change Light Output: When the light is on, keep rotating the rotary knob clockwise for the stepless adjustment of the light output in the following order: low orange light, high orange light, low warm white light, and high warm white light. Rotating the rotary knob counter-clockwise will change the light output in the reverse order.

WARRANTY

Within 30 days of purchase: Contact the original seller for repair or replacement.
Within 2 years of purchase: Contact Olight for repair or replacement. This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an Authorized retailer or Olight itself.

USA Customer Support
cs@olightstore.com
Global Customer Support
customer- service@olightworld.com
Visit www.olightworld.com to see our complete product line of portable illumination tools.

EU-Declaration of Conformity can be found here : https://olightworld.com/ec- declaration

Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park, No 6 Road, Town, Dongguan City, Guangdong, China. Made in China