RAZER Hammerhead True Wireless Pro Earbuds User Guide
- June 9, 2024
- Razer
Table of Contents
RAZER HAMMERHEAD
TRUE WIRELESS PRO
MASTER GUIDE
Hammerhead True Wireless Pro Earbuds
Enjoy true audio freedom and a pure, uninterrupted listening experience with the most advanced earbuds we’ve ever created. Sporting a 60ms low latency connection and hybrid active noise cancellation, focusing on your games, music and videos has never been this absolute.
WHAT’S INSIDE / WHAT’S NEEDED
WHAT’S INSIDE
- Razer Hammerhead True Wireless Pro earbuds
- Charging case
- Charging cable
- Additional silicone ear-tips in 3 sizes (S, M, L)
- ComplyTM foam tips (M)
WHAT’S NEEDED
- Devices with Bluetooth audio capability
- Internet connection for app installation
LET’S GET YOU COVERED
You’ve got a great device in your hands, complete with a 2-year limited warranty coverage. Now maximize its potential and score exclusive Razer benefits by registering at razerid.razer.com
Got a question? Ask the Razer Support Team at
support.razer.com
TECHNICAL SPECIFICATIONS
- Frequency Response: 20 Hz – 20 kHz
- Impedance: 16 Ohm
- Sensitivity: 118dB
- Input power: 3 mW
- Driver size — Diameters: 10mm
- Connection type: Bluetooth connection
- Microphone Frequency Response: 100 Hz -10 kHz
- Microphone Pick Up Pattern: Omni-directional
- Microphone Signal-to-Noise Ratio: 64dB
- Microphone Sensitivity: -26dBFS
- Compatibility: Devices with Bluetooth audio capability
- Smartphone app: Available for Android and iOS
- Supported codecs: SBC, AAC
GETTING STARTED
CHARGING YOUR RAZER HAMMERHEAD TRUE WIRELESS PRO
For first time use, connect the charging case to a USB port using the charging
cable without removing the earbuds. For subsequent use, the charging case and
the earbuds can be charged independently.
Wait until your Razer Hammerhead True Wireless Pro is fully charged.
BATTERY INDICATOR FOR THE CHARGING CASE
When Plugged In
| Status
---|---
Status Static red | Charging
Static green | Fully charged
When Unplugged
| Status
---|---
Static green | Battery full
Static orange | Battery low
Blinking red | Battery critical
PAIRING TO A MOBILE DEVICE
When trying to connect your Razer product, remember to keep it within 1 meter
of your mobile device.
- While inside the charging case, simply open the lid to enter pairing mode.
- Enable Bluetooth on your mobile device and select Razer Hammerhead TWS Pro from the list of devices found.
- Wait for pairing to complete. You will hear an audio prompt when me earbuds have successfully paired and connected to your device.
If the earbuds fail to connect to your audio source, the earbuds will stay in
search mode then power off after 3 minutes. If this happens, simply repeat the
steps again to pair.
Once the earbuds have been paired, it will automatically try to connect to
that paired mobile device every time the charging case’s lid is opened, or the
earbuds are powered on. Your earbuds can only connect to one mobile device at
a time.
USING YOUR EARBUDS
GAMING MODE
While connected, triple tap then hold the last tap for at least 2 seconds on
any earbud to activate gaming mode. Once enabled, your earbuds will function
at a lower latency; giving you real-time audio feedback while gaming. Repeat
the same gesture to disable gaming mode.
For best performance, it is recommended to keep your earbuds within a very
close distance of the audio source.
ACTIVE NOISE CANCELLATION (ANC) / QUICK ATTENTION MODE
Active Noise Cancellation helps eliminate background noise while Quick
Attention Mode allows you to hear your surroundings without needing to remove
the earbuds. While connected, tap and hold on any earbud for at least 2
seconds to activate ANC and repeat to activate Quick Attention Mode. Doing the
same gesture for the third time will deactivate both functions.
An audio prompt will notify you when ANC and/or Quick Attention Mode have been enabled or disabled.
USING THE SILICON EAR-TIPS
The silicon ear-tips offer increased comfort, sound isolation, and security.
Various size options let you achieve a comfortable and secure fit that
effectively reduces unwanted noise.
Due to the different ear canal sizes of individuals, its recommended to interchange the ear-tips to a larger or smaller size to improve comfort and sound quality and achieve a proper seal.
POWER ON/OFF
To power off the device, simply place the earbuds back inside the charging
case and close the lid. Opening the lid if they are in the charging case will
power them on.
If the earbuds are left idle outside the
charging case for a few minutes, you will hear an audio prompt and then the
earbuds will power off.
Tap and hold the function button on each earbud for at least 2 seconds to power them on again. You will hear an audio prompt from each earbud once they are powered on.
FUNCTION BUTTON QUICK REFERENCE
The following functions are only available when the earbuds are paired to a
mobile device.
| ACTION | EFFECT | AUDIO PROMPT |
|---|---|---|
| Tap | Answer call | Voice |
| End call | Tone | |
| Play/pause media | None | |
| Tap and hold for 2 seconds | Cycle between Enable ANC, Enable Quick Attention | |
| Mode, and Disable ANC and Quick Attention Mode | Voice | |
| Power on the corresponding earbud | Voice | |
| Reject incoming call | Voice | |
| Activate virtual assistant | Tone | |
| Tap and hold for 4 seconds | Activate pairing mode for the corresponding | |
| earbud | Voice | |
| Double tap | Accept incoming call or switch calls | None |
| Skip to the next track when playing media | None | |
| Triple tap | Return to the previous track when playing media | None |
| Triple tap then hold the last tap for 2 seconds* | Enable/disable Gaming Mode |
Voice
While in pairing mode, clear paired devices| Voice
RAZER AUDIO APP
Making advanced customization just got a whole lot easier for your Razer
Hammerhead True Wireless Pro earbuds. With the Razer Audio app, learn all its
gestures, select from predefined EQs or customize one as needed, remap what
each tap or gesture function does and much more—anytime, anywhere.
SAFETY AND MAINTENANCE
SAFETY GUIDELINES
In order to achieve maximum safety while using your Razer Hammerhead True
Wireless Pro, we suggest that you adopt the following guidelines:
Should you have trouble operating the device properly and troubleshooting does
not work, unplug the device and contact the Razer hotline or go to
support.razer.com for assistance.
Do not take apart the device (doing so will void your warranty) and do not
attempt to operate it under abnormal current loads.
Keep the device away from liquid, humidity or moisture. Operate the device
only within the specific temperature range of 0°C (32°F) to 40°C (104°F).
Should the temperature exceed this range, unplug and/or switch off the device
in order to let the temperature stabilize to an optimal level.
The device isolates external ambient sounds even at low volumes, resulting in
lowered awareness of your external surroundings. Please remove the device when
engaging in any activities that requires active awareness of your
surroundings.
Listening to excessively loud volumes over extended periods of time can damage
your hearing. Furthermore, legislation of certain countries permits a maximum
sound level of 86db to affect your hearing for 8 hours a day. We therefore
recommend that you reduce the volume to a comfortable level when listening for
prolonged periods of time. Please, take good care of your hearing.
MAINTENANCE AND USE
The Razer Hammerhead True Wireless Pro requires minimum maintenance to keep it
in optimum condition. Once a month we recommend you clean it using a soft
cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh
cleaning agents.
LEGALESE
COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION
©2020 Razer Inc. All rights reserved. Razer, the triple-headed snake logo,
Razer logo, and “For Garners. By Garners.” are trademarks or registered
trademarks of Razer Inc. and/or affiliated companies in the United States or
other countries. All other trademarks are the property of their respective
owners.
©2018 Google LLC All rights reserved. Android, Google, Google Logo, Google
Play, and the Google Play logo are registered trademarks of Google LLC.
Apple, the Apple logo, and iPhone are trademarks of Apple Inc., registered in
the U.S and other countries. App Store is a service mark of Apple Inc.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc., and any use of such marks by Razer is under license. THX
and the THX Logo are the property of THX Ltd., registered in the U.S. and
other countries. Comply is a registered trademark of Hearing Components, Inc.
Razer Inc. (“Razer”) may have copyright, trademarks, trade secrets, patents,
patent applications, or other intellectual property rights (whether registered
or unregistered) concerning the product in this guide. Furnishing of this
guide does not give you a license to any such copyright, trademark, patent or
other intellectual property right. The Razer Hammerhead True Wireless Pro (the
“Product”) may differ from pictures whether on packaging or otherwise. Razer
assumes no responsibility for such differences or for any errors that may
appear. Information contained herein is subject to change without notice.
LIMITED PRODUCT WARRANTY
For the latest and current terms of the Limited Product Warranty, please visit
razer.com/warranty.
LIMITATION OF LIABILITY
Razer shall in no event be liable for any lost profits, loss of information or
data, special, incidental, indirect, punitive or consequential or incidental
damages, arising in any way out of distribution of, sale of, resale of, use
of, or inability to use the Product. In no event shall Razer’s liability
exceed the retail purchase price of the Product.
GENERAL
These terms shall be governed by and construed under the laws of the
jurisdiction in which the Product was purchased. If any term herein is held to
be invalid or unenforceable, then such term (in so far as it is invalid or
unenforceable) shall be given no effect and deemed to be excluded without
invalidating any of the remaining terms. Razer reserves the right to amend any
term at any time without notice.