MERCUSYS MS105 5/8-Port 10/100Mbps Desktop Switch Installation Guide

June 9, 2024
MERCUSYS

MERCUSYS MS105 5 8-Port 10 100Mbps Desktop Switch

MERCUSYS MS105 5 8-Port 10 100Mbps Desktop Switch productMERCUSYS MS105 5
8-Port 10 100Mbps Desktop Switch productMS108 is used for demonstration in this guide. Images may differ from actual product.

Connection

MERCUSYS MS105 5 8-Port 10 100Mbps Desktop Switch 01

LED Explanation

MERCUSYS MS105 5 8-Port 10 100Mbps Desktop Switch 02

FAQ (Frequently Asked Questions)

Q1. The Power LED is off.
The Power LED should be on when the power system is working properly. If the Power LED is not on, please check as follows:

  • A1: Make sure the power cord is connected to the switch with power source properly.
  • A2: Make sure the voltage of the power supply meets the requirements of the input voltage of the switch.
  • A3: Make sure the power source is ON.

Q2. The Port LED is off when a device is connected to the corresponding port.
It is recommended that you check the following items:

  • A1: Make sure that the cable connectors are firmly plugged into the switch and the device.
  • A2: Make sure the connected device is turned on and working properly.
  • A3: The cable must be less than 100 meters long (328 feet).

Environmental and Physical Specifications

MERCUSYS MS105 5 8-Port 10 100Mbps Desktop Switch 03

General Specifications

MERCUSYS MS105 5 8-Port 10 100Mbps Desktop Switch 04

COPYRIGHT & TRADEMARKS

Specifications are subject to change without notice. is a registered trademark of MERCUSYS TECHNOLOGIES CO., LIMITED. Other brands and product names are trademarks or registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from MERCUSYS TECHNOLOGIES CO., LIMITED. Copyright © 2016 MERCUSYS TECHNOLOGIES CO., LIMITED. All rights reserved.
http://www.mercusys.com

SAFETY NOTICES

Cautions
Do not use this product near water,
for example, in a wet basement or near a swimming pool.
Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals