FUJITSU ETERNUS AX series All Flash Arrays Storage Instructions
- June 9, 2024
- FUJITSU
Table of Contents
ETERNUS AX series All Flash Arrays Storage
Instruction Manual
About ONTAP S3 Licenses
Fujitsu Storage
ETERNUS AX series All-Flash Arrays,
ETERNUS HX series Hybrid Arrays
ONTAP S3 is incorporated in ONTAP 9.8 and later. The following operations are required prior to the use of ONTAP S3.
- Obtaining a license
- Registering a license
Obtaining a License
To obtain the license key used to activate ONTAP S3, send an email including
the serial number of the storage system to the
following email address: fj-et-fabricpool@dl.jp.fujitsu.com
Registering a License
Register the license via ONTAP System Manager.
-
Log in to ONTAP System Manager and select the “Configuration” tab.
-
Navigate to the “Licenses” page under “CLUSTER”.
-
Click “+Add” from the menu.
-
Enter the downloaded license key and click “Add”.
For ONTAP 9.9.1 or later, (1) select the “Use 28-character legacy keys” checkbox and then (2) enter the license key.
Fujitsu Storage ETERNUS AX series All-Flash Arrays,
ETERNUS HX series Hybrid Arrays
About ONTAP S3 Licenses
P3AG-6022-02ENZ0
Date of issuance: November 2022
Issuance responsibility: Fujitsu Limited
-
The content of this manual is subject to change without notice.
-
This manual was prepared with the utmost attention to detail.
However, Fujitsu shall assume no responsibility for any operational problems as the result of errors, omissions, or the use of information in this manual. -
Fujitsu assumes no liability for damages to third party copy-rights or other rights arising from the use of any information in this manual.
-
The content of this manual may not be reproduced or distributed in part or in its entirety without prior permission from Fujitsu.
Fujitsu Storage ETERNUS AX/HX series About ONTAP S3 Licenses
Copyright 2022 Fujitsu Limited
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>