JAXPETY HG61F0242 Hygiene Toilet Bidet Attachment for Cool Self-Clean Instruction Manual
- June 9, 2024
- JAXPETY
Table of Contents
JAXPETY HG61F0242 Hygiene Toilet Bidet Attachment for Cool Self-Clean
WARNING! PLEASE PLACE ALL THE PRODUCTS AT ROOM TEMPERATURE AND DO NOT STORAGE THE BIDETS AND ITS ACCESSORIES IN THE FREEZING TEMPERATURE ENVIORMENTS UNDER 0 DEGREE CELCIUS!
NAMES AND FUNCTIONS OF PARTS
INSTALLATION INSTRUCTION
PREPARATION
- A. Remove the existing toilet seat.
- B.Turn off the water valve.
- C.Flush toilet to drain tank completely
- D.Take out exiting water pipe.
- A. Install adaptor beneath
- B. Connect white water water tank.
- C. Install main body. tube into adaptor nipple.
HELPFUL TIP
Over tightening flexible hoses adaptor can cause damage to the threads and result in water leakage. Use only hand pressure first and check for any leakage. Turn only less than quarter turn at a time making sure there is no leakage.
FINAL ASSEMBLED FIGURE
TRYING FOR THE FIRST TIME
Congratulations! You are ready to use for the first time. Be sure to turn water pressure control knob gently until reaching your desired pressure. Water pressure control device is only to control water pressure, not for setting up the duration of water spray.
TROUBLE SHOOTING
If your spray outlet hole is clogged for some reason, simply try to move spray outlet up and down for a few times manually
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>