NETGEAR 8 Port Gigabit Ethernet Switch User Guide
- June 9, 2024
- NETGEAR
Table of Contents
NETGEAR 8 Port Gigabit Ethernet Switch
Introduction
This switch provides 8 10/100/1000M ports. It was designed for easy
installation and high performance in an environment where traffic is on the
network and the number of users increases continuously.
The small compact palm size was specifically designed for small to medium
workgroups. It can be installed where space is limited; moreover, it provides
smooth network migration and easy upgrade to network capacity.
Key Features
- 8 Port 10/100/1000M Switch
- Palm size with metal case
- Auto-learn of networking configurations
- Auto-detect full/half-duplex modes for any port
- Dedicated full-duplex 2000Mbps bandwidth
- Store-and-Forward switching methods
- IEEE 802.3x flow control for full-duplex and back-pressure flow control for half-duplex
- Non-blocking & Non-head-of-line blocking full wire speed forwarding
- Auto-MDI/MDI-X function for any port
- Smart plug & play
Power
Power is supplied through an external DC power adapter.
Front Panel (LEDs)
LED Indicators of 8 Port 10/100/1000M Switch
| LED | Status | Operation |
|---|---|---|
| Power | On | Power is on. |
| Off | Power is off. | |
| LINK/ACT | On | Port is for connection |
| Off | No connection. | |
| Flashing | Data is transmitting or receiving. |
Package Contents
Before you start to install this switch, please verify your package that contains the following items:
- One Gigabit Ethernet Switch
- One Power Adapter
- One Quick Installation Guide
Note : If any of these items is found missing or damaged, please contact your local supplier for replacement.
Technical Specifications
Standards
| IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3ab 1000BaseT
IEEE 802.3x Flow control
---|---
Features
| Number of Ports: 8 MAC Address: 8K Buffer Memory: 1.5Mb Jumbo Frames: 9KB
Transmission Method: Store
and Forward
Filtering/ Forwarding
Rates
| 1000Mbps port –1,488,000pps 100Mbps port – 148,800pps
10Mbps – 14,880pps
Transmission Media
| 10BaseT Cat. 3, 4, 5 UTP/STP
100BaseTX Cat. 5 UTP/STP
1000BaseT Cat. 5E UTP/STP
LED Indicators| Power, Link/ACT
Power Supply| DC 5V/1.2A
Power Consumption| 4 Watts (Max)
Dimensions| 21 x 94 x 62 mm
Operating Temperature| 0 to 50 °C
Storage Temperature| -20 to 80 °C
Humidity| Max. 90% RH
(non-condensing)