VIBE BDPRO4T-V0 Compression Driver User Manual
- June 4, 2024
- Vibe
Table of Contents
VIBE BDPRO4T-V0 Compression Driver
Owners Manual
Congratulations on purchasing your VIBE speakers. Please read this manual in
order to fully understand how to get the best results from this product and
ensure that all advice on how to look after the product is followed.
Thank you for buying VIBE, we hope you enjoy listening to your product as much
as we enjoyed creating it.
WARNING
DO NOT EXPOSE THIS PRODUCT TO DAMP OR MOISTURE – doing so may result in fire,
shock or damage to the product.
BEFORE WIRING DISCONNECT THE CABLE FROM THE POSITIVE BATTERY TERMINAL –
failure to do so may result in electric shock or injury.
ENSURE GOOD AND CORRECT CONNECTIONS – failure to make the correct connec-tions
may result in fire or damage to the product.DO NOT USE ANY FUNCTIONS OF THIS
EQUIPMENT THAT MAY TAKE YOUR CONCENTRATION AWAY FROM DRIVING YOUR VEHICLE – do
not set up your amplifier whilst driving, doing so may result in an accident.
For prolonged setting up, make sure that your vehicle is stationary and in a
safe location.
KEEP THE VOLUME AT A LEVEL SO YOU CAN STILL HEAR OUTSIDE NOISE – failure to do
this may result in an accident. VIBE equipment is capable of producing sound
levels that can permanently damage your hearing. VIBE recommends caution when
listening at high volume. For safe and enjoyable listening the sound should be
comfortable and clear without distortion.
CAUTION
Never connect any speaker lead to the car chassis. This can cause severe
damage to your speaker /car radio /amplifier.
Before drilling or cutting any holes, investigate the layout of your vehicle
thoroughly. Use caution when working near the fuel / hydraulic lines and
electrical wiring. Observe the correct polarity when wiring, improper phasing
may cause a loss of bass response.
Ensure that no moving parts catch on the speaker or grille (e.g. window or
door handles, or window glass inside the door).
Speaker Installation Guidelines
Firstly, make sure that the speakers will fit in your chosen location. This may involve the removal of the standard vehicle speakers. Please use the mounting depth and hole cut dimensions as detailed in this manual for guidance.
- If necessary cut any material away to allow the speaker to sit correctly.
- Cut out the mounting hole, and pre-drill any other fixing holes.
- Screw through both gasket and speaker until the speaker is securely fastened.
Speaker Installation
Find a suitable mounting location for the speaker.
Mark the mounting holes and pre-drill the fixing hole with a 2mm drill bit. If
the grille is to be fitted then place it over the speaker and screw through
both the grille and the speaker using the provided screws. Be careful not to
over-tighten the screws as it may cause damage to the grille.
Please follow the wiring diagrams and ensure that correct polarity is observed
as incorrect wiring may cause the speakers to be out of phase with the rest of
the system and result in a loss of bass.
Tweeter Connections
NOTE: Unless using an active crossover network, the 2.2uf 100v capacitor must be fitted in order to avoid damage to the tweeter.
Specification
| Model | BDPRO4T-V0 | BDPRO3T-V7 |
|---|---|---|
| Type | Compression driver | Compression driver |
| Configuration | 1-way | 1-way |
| Speaker Size | 4.5” (115mm) | 3” (75mm) |
| Peak/RMS Power | 360W/120W | 300W/100W |
| Sensitivity | 107dB | 106dB |
| Frequency Response | 1.5kHz – 20kHz | 2kHz – 20kHz |
| Impedance | 4Ω | 4Ω |
| Mounting Depth | 2.6” (66 mm) | 1.7” (43mm) |
| Mounting Diameter | 3.5” (90mm) | 2.2” (57mm) |
| Grille Included | No | No |
| Recommended Amp | POWERBOX100.4M-V0 | POWERBOX100.4M-V0 |
UK Technical Enquiries
Call 09067031420
Calls cost 50p per minute. Call costs correct at date of publication Hours of
business 9.00am – 5.30pm GMT Monday – Friday.
All calls are recorded for training purposes.
MIDBASS Distribution PO Box 11000 B75 7WG
International Technical Enquiries
For international technical support please contact the distribution agent for your country. Please visit www.vibeaudio.co.uk for more details.
Limited Warranty
All VIBE products carry a full 12-month warranty, valid from the date of the
original receipt and proof of purchase (the UK only). The online warranty card
should be completed within seven days of the original purchase date. The
original receipt and packaging should be retained for this twelve-month
period. If the product develops a problem at any stage during the warranty
period, it should be returned to the point of purchase in it’s original
packaging, and complete with no items missing.
A full description of VIBE’s warranty information can be found on our website:
www.vibeaudio.co.uk
What Is Not Covered
- Damage to the product due to improper installation.
- Subsequent damage to other components.
- Damage caused by exposure to moisture, excessive heat, chemical cleaners and/or UV radiation.
- Damage through negligence, misuse, accident, or abuse. Repeated returns for the same fault may be considered abuse.
- Any cost or expense related to the removal and/or re-installation of the product.
- Damage caused by amplifier clipping or distortion.
- Items repaired or modified by any unauthorized repair facility.
- Return shipping on nondefective items.
- Products returned without a returns authorization number.
- Damage to the product due to the use of sealant.
International Warranty
Contact your international VIBE dealer or distributor concerning the specific
procedures for your country’s warranty policies.
www.vibeaudio.co.uk
Warning
VIBE equipment is capable of sound pressure levels that can cause permanent
damage to your hearing and those around you. Please use common sense when
listening to your audio system and practice safe sound.
Copyright
All content included in this manual such as text, graphics, logos, icons, images and data, are the property of Midbass Distribution Limited t/a VIBE Technologies Limited (herein referred to as “VIBE”, “us” or “we”) and its affiliate or their content and technology providers, and are protected by United Kingdom and International copyright laws. All rights reserved. VIBE TV, VIBE Arcade, Bass Box, Optisound, Cinesound, BlackAir, BlackBox, Space, LiteAir, SLICK, BlackDeath, Bubonic, Reaper, Anti-VIBE, FastPlug, BlackHole, QB69, VIBE Turbo Port, Vibe TurboVent, Pressure Board, Super Driver, VIBE Pulse, VIBE Power, VIBE Digital, VIBE MAG Plugs, Ferrite Loaded, VIBE Solid Core, VIBE OCC, VIBE FLAT, ICC, Bass Enhance, Bass Enhance+, QBass, SpeedBass, PowerBass, N-Wedge, Box Grip, ARBSS, Supercar Series and all stylised representations of product names, or the abbreviations of product names, as logos are all trademarks of VIBE.
Graphics and logos are trademarks or trade dress of VIBE Technologies Ltd or its subsidiaries. VIBE’s trademarks and trade dress may not be used in connection with any product or service that is not VIBE’s, in any manner that is likely to cause confusion among customers or in any manner that disparages or discredits VIBE. All other trademarks not owned by VIBE or its subsidiaries that appear in this manual are the property of their respective owners, who may or may not be affiliated with, connected to, or sponsored by VIBE or its subsidiaries.
TO THE FULLEST EXTENT PERMITTED AT LAW, VIBE IS PROVIDING THIS MANUAL AND ITS CONTENT ON AN “AS IS” BASIS AND MAKES NO (AND EXPRESSLY DISCLAIMS ALL) REPRESENTATIONS OR WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, WITH RESPECT TO THIS MANUAL OR THE INFORMATION, CONTENT, MATERIALS OR PRODUCTS INCLUDED IN THIS MANUAL INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IN ADDITION, VIBE DOES NOT REPRESENT OR WARRANT THAT THE INFORMATION CONTAINED IN THIS MANUAL IS COMPLETE OR CURRENT, AND THAT ALL SPECIFICATIONS AND INFORMATION CONTAINED WITHIN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. VIBE RECOMMENDS CAUTION WHEN LISTENING TO MUSIC REPRODUCED THROUGH VIBE EQUIPMENT. VIBE EQUIPMENT IS CAPABLE OF PRODUCING SOUND AND SOUND PRESSURE LEVELS THAT CAN PERMANENTLY DAMAGE YOUR HEARING OF YOU AND THAT OF OTHERS. FOR SAFE AND ENJOYABLE LISTENING, THE SOUND SHOULD BE CLEAR WITHOUT DISTORTION AT A COMFORTABLE VOLUME.
BY USING ANY VIBE EQUIPMENT, YOU AGREE TO TAKE FULL RESPONSIBILITY FOR YOUR OWN SAFETY AND THE SAFETY OF OTHERS WHEN LISTENING TO MUSIC AT HIGH VOLUMES THROUGH EQUIPMENT YOU HAVE PURCHASED. USE OF ANY VIBE EQUIPMENT CONSTITUTES AGREEMENT TO THIS DISCLAIMER.
Except as specifically stated in this manual, to the fullest extent permitted at law, neither VIBE nor any of its affiliates, directors, employees or other representatives will be liable for damages arising out of or in connection with the use of this manual or the information, content, materials or products included. This is a comprehensive limitation of liability that applies to all damages of any kind, including (without limitation) compensatory, direct, indirect or consequential damages, loss of data, income or profit, loss of or damage to property and claims of third parties. For the avoidance of doubt, VIBE does not limit its liability for death or personal injury to the extent only that it arises as a result of the negligence of VIBE, its affiliates, directors, employees or other representatives.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>