make it real 1403 Insint Dreamcatcher Instructions

: June 9, 2024
: make it real

Table of Contents

make it real 1403 Insint Dreamcatcher
WHAT’S INSIDE
LEGEND
INSTALLATION INSTRUCTIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

make it real 1403 Insint Dreamcatcher

make-it-real-1403-Insint-Dreamcatcher-PRODACT-IMG

WHAT’S INSIDE

ring
silver cord 3 m (3.3 yrd)
decorative butterfly
bead threader
colors of ribbon 23 m (25 yrd)
assorted beads
nylon cord 1 m (1.09 yrd)
sheet of adhesive gems
clips
bead trays

You will need

make-it-real-1403-Insint-Dreamcatcher-FIG-11

LEGEND

Scissors
Rule
Adhesive tape
Craft glue
Clear nail polish
Let dry
Kno
Double knot
Repeat

INSTALLATION INSTRUCTIONS

Keeping the ribbon at an angle, tape the end of the wide purple ribbon attaching it to the metal ring.
Wrap the ribbon tightly all around the metal ring.
Make a double knot.

make-it-real-1403-Insint-Dreamcatcher-FIG-17

Add a drop of craft glue or clear nail polish. Wait 5 minutes for it to dry.
Cut the excess ribbon.
With one end of the silver cord make a double knot onto the ring.

make-it-real-1403-Insint-Dreamcatcher-FIG-20

Add a drop of glue to the other end. Let dry for 5 minutes.
At 30 cm (12 in) from the knot on the ring, wrap the remaining length of the silver cord loosely around your fingers.

make-it-real-1403-Insint-Dreamcatcher-FIG-22

Use the clip to hold the cord together. This will help you to weave the web pattern.

make-it-real-1403-Insint-Dreamcatcher-FIG-23

With a ruler and a pen, mark the ring at 6 cm (2 ¼ in) from the first knot.

make-it-real-1403-Insint-Dreamcatcher-FIG-24

Pass the cord over the ring.

make-it-real-1403-Insint-Dreamcatcher-FIG-25

Slide the cord through the loop from the back.

make-it-real-1403-Insint-Dreamcatcher-FIG-26

Place the cord on the mark and pull gently on the cord to tighten it.

make-it-real-1403-Insint-Dreamcatcher-FIG-27

Clamp the second clip onto the cord intersection to hold it in place.

make-it-real-1403-Insint-Dreamcatcher-FIG-28

Repeat steps 10 to 14 until you have 8 loops on the ring.

make-it-real-1403-Insint-Dreamcatcher-FIG-29

Unclamp the silver cord. Following the pattern, thread 12 beads onto the cord.

make-it-real-1403-Insint-Dreamcatcher-FIG-30

Wrap the silver cord as in step 8 and 9.

make-it-real-1403-Insint-Dreamcatcher-FIG-31

Slide the first bead to the left.

make-it-real-1403-Insint-Dreamcatcher-FIG-32

Using the same technique as step 11 and 12, pass the cord and the beads over the cord.

make-it-real-1403-Insint-Dreamcatcher-FIG-33

Slide the cord through from the back.
Make sure the beads are following.

make-it-real-1403-Insint-Dreamcatcher-FIG-34

Move the holding clip to secure loop.

make-it-real-1403-Insint-Dreamcatcher-FIG-35

Repeat steps 17 to 21 until no more beads are left on the cord.

make-it-real-1403-Insint-Dreamcatcher-FIG-36

Unclip the cord and thread the 12 remaining beads.
Continue to weave the web pattern as in steps 18 to 21 until no beads are left on the cord.

make-it-real-1403-Insint-Dreamcatcher-FIG-38

Continue weaving for 1 last row.

make-it-real-1403-Insint-Dreamcatcher-FIG-39

To secure the weaving, tie a double knot on a junction, as shown.
Add a drop of glue or clear nail polish on the knot, let dry for 5 minutes.

make-it-real-1403-Insint-Dreamcatcher-FIG-41

Cut the excess cord.
Use the remaining piece of cord to create a loop to hang the dreamcatcher.

make-it-real-1403-Insint-Dreamcatcher-FIG-43

Thread one sequence of beads and secure them by making a knot on top of them.
Make a knot at 10 cm (4 in) and cut the excess cord.

make-it-real-1403-Insint-Dreamcatcher-FIG-45

Hang the dreamcatcher to help you complete the following steps.
Put a drop of glue on the ends of the 3 nylon cords and wait 5 minutes for it to dry.

make-it-real-1403-Insint-Dreamcatcher-FIG-46

Thread a pendant bead onto the end of a nylon cord.
Make a double knot to hold the bead in place.
Add a drop of glue on the knot.
Don’t cut the excess now! Cut them only on step 42 when all the bead strands are attached to the dreamcatcher.
Thread the beads following the pattern until you have 43 beads on the thread, including the pendant. This is the middle strand and the longest.

make-it-real-1403-Insint-Dreamcatcher-FIG-51

Attach this strand onto the middle of the ring with a double knot. Add a drop of glue.

Tip: Use the threader to thread the beads if needed.

Repeat steps 33 to 37 for the 2 other strands, but this time using 36 beads on each strand.

make-it-real-1403-Insint-Dreamcatcher-FIG-53

Attach the strands at 8 cm (3 in) from the middle strand with a double knot.

make-it-real-1403-Insint-Dreamcatcher-FIG-55

Add a drop of glue on all the knots. Wait 5 minutes for the glue to dry. Cut the excess cords.

make-it-real-1403-Insint-Dreamcatcher-FIG-56

One color at the time, cut pieces of 70 cm (27 ½ in) long.

make-it-real-1403-Insint-Dreamcatcher-FIG-57

Attach the ribbons by making a double knot onto the bottom of the ring distributing them evenly.

make-it-real-1403-Insint-Dreamcatcher-FIG-58

Put a small drop of glue on the ribbons ends to prevent them from unraveling.
Repeat for the other ribbons.

make-it-real-1403-Insint-Dreamcatcher-FIG-59

Add gems to the butterfly.
Gently fold the wings to make the butterfly more realistic.
Use a small piece of adhesive tape to fix the butterfly in place.

make-it-real-1403-Insint-Dreamcatcher-FIG-63

WARNING

CHOKING HAZARD – small parts. Not suitable for children under 3 years. This toy contains functional sharp points .

MAKE IT REAL
1700 Reisterstown Rd Ste 211 Pikesville MD 21208 USA 410-995-8685 © 2020 MAKE IT REAL, LLC G.08 Flint Glass Works, 64 Jersey Street Ancoats Urban Village, Manchester, M4 6JW UK +44 (0) 161 302 4100 makeitrealplay.com