JAXPETY WG71E0003 Steam Cleaner Instruction Manual

JAXPETY WG71E0003 Steam Cleaner

Product Characteristics

Technically leading
With exclusive patented technology, high-temperature and high-pressure steam is used for clearing away the dirts and stains on the floor boards, doors, windows and clothes; The machine also can be used for killing bacteria on surfaces, and removing dusts and bacteria, and it is an environment-friendly and sanitary product.
Automatic control ofheating,.able to generate steam continuously and continuous cleaning is easy. With pure high-pressure water steam used, no chemical agents are added, completely environment-friendly.

Higher Safety
Designed to prevent heating empty boiler, after the water in the boiler tank is heated and evaporated completely, the machine will automatically disconnect the power supply and thus prevent empty heating. With high-sensitivity thermostat, 140’C high-temperatul’e steam is available, ensuring dis.infection and ste,rilization. Toe safety valve has automatic pressure release function. When there is high steam pressure in the tank, the valve will automatically open and release the pressure.
Extended power ·cord with double insulation, can effectively insulate the cable from water and dust, and ensure safety.

Durable
The machine is designed to have aluminum alloy die casting boiler body with extra-thick inner wall, and can resist high pressure and has a long service life. Complete plastic shell is made from quality PP and PA with anti- corrosion and high strength.

Energy-saving
With integrated design of specially-made heating tubes and boiler body, overall heating is provided, high heating efficiency and energy-saving.
Double-layer shell structure can effectively prevent beat loss, environment- friendly and energy-saving.

Easy to use
Switch on power supply, and the machine immediately starts beating process. When it heats to specified temperature, press the steam button, and steam will be sprayed out slowly. So the machine is easy to operate. With complete cleaning accessories supplied, the machine can be assembled and disassembled easily. It can be used to clean the doors, windows, floor boards and clothes, and thus is applicable widely.

Description of Structuring Parts

1. Body
2. Short spayer nozzle
3.  Safety cap
4. Steam buttl>n
5. Handle
6. Power cord
7. Power indicator 8zz Funnel
8. Measuring cup
9. Nylon round brush
10. Bent spray noule
11. Long spray nozzle
12.  Extended connecting spray nozzle
13. General spray nozzle
14. Spray noxzle for door/window
15. Tower sleeve

Safety Precautions

1. Do not allow children to use this machine independently or little children to be too near to this machine when no adults attend to them.
2. To prevent electrical shock, do not immerse power cord or power plug in water or other liquids.
3. The power cord and power plug should be in good condition and must not be damaged. Damaged or defective power cord and power plug must not be used and should be repaired at appointed service center.
4. This product is for only use in households and must not be used for industrial applications,
5. Do not turm on power supply until the tank is full of water.
6. Used power supply should comply with the product requirements of the manufacturer.
7. During operation, the tank mouth must be phugged hermetically and safety cap should be tightened in position.
8. A socket with special earthing wire must be used.
9. In use, the machine body must not be inclined at more than 45 degrees. Or otherwise boiling water will be sprayed out together with team.
10.  Do not direct the steam towards persons, animals or other electrical products.
11.  Before refilling water, ensure to unplug the power cord to disconnect power supply. It is necessary to unplug the power cord after the machine is used, before it is cleaned and while it is repaired.
12. Do not add any rust remover, odorcounteracting agent, alcohol and detergent into the tank, which will possibly cause damage to the tank.
13. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
14. The appliance has to be unplugged after use and before cleaning or user maintenance of the appliance.
15. Do not use in swimming pools containing water.
16. Liquid or steam must not be directed towards equipment containing clectrical components, such as the interior of ovens.
17.  The filling aperture must not be opened during use.

Important: never overfill the tank, or otherwise the steam generation will be affected
or too high steam pressure will be caused.

Accessories supplied with the machine

Technical Specification

• Rating of power supply: 110-120V, 60Hz
• Tank capacity: 350ml
• Suggest water capacity: 250ml
• Rated power: 900W-1050W
• Steam pressure: 0.25MPa
• Injected steam capacity: 28g/min
• Temperature controller: functioning temperature: 135C;
• fuser: functioning temperature:167C
• Overall dimension: 415x131x215 mm
• Net weight: 1.25kg

Functions

Disinfection and sterilization
Install the long spray nozzle on the main body and aim the spray nozzle at the position that needs disinfection, and then press down the steam button. High-temperature steam can kill bacteria.

Cleaning the clothes
Install the general spray nozzle on the main body, and then cover the towel sleeve on it. Aim the spray nozzle at the hung clothes, and press down the steam button and move the nozzle up and down as well as to the left and to the right at the same time. Then stains can be removed from the clothes.

Cleanin11 doors and windows

Install the general spray nozzle on the main body, and then install the spray nozzle for door/window on it. Aim the spray cup at the door/window, and press down the steam
button and mo,••· the nozzle up and down as well as to the left and to the right at the same time. Then stains can be removed from the door/window. Cleaning the Door boards
Install the extended connecting spray nozzle on the main body, then install bent spray nozzle or round spray nozzle. Aim the spray nozzle. at the floor board, and press down the steam button to remove the dirt and stains in wall comers and on the floor.

Operating Instructions

Operation Procedures

1. Unpack the product, check the accessori0$ and documents supplied with die product and make sure that the product and accessories are not damaged.

2. Before use, please read the User Manual caref\llly. Toe steam cleaner is oniy for use in households.

3. First, place the steam cJ..,,er oo a level platfo,m, push down the safety cover, unscrew the safety C”J> counterclockwise, and then in,,’tall the funnel. As chatting:

4. Take suitable clean water with the measuring cup, and add the ·water into the tank.
   (Max. capacity of the tank is 350ml. Do not overfill the tank and some space must be left in the tank). Re-install the safety cap and tighten it in position

5. Check the power supply and socket, and confirm they comply with the reqt,irements given in the user manual, then connect the power supply.

6. Indicator lamp will tilm off in 3 minutes after connect the power supply,.it means steam is ;ready. Af this time put forward the safety switch on the ,5te’ID) button theq lightly press the steam button and check whether steam is sprayed Ollt of the nozzle. (Do not. aim the spray nozzle at any .animal, person or electrical produ’ls).

7. If there is ste’lm sprayed out, release steam bllttl>n and instl!lls suitable accessories aooorQill:g to your needs, then press down the steam button again •in order to carry out the. operatioo,; required by you.

8. When finish the cleaning job or stop the machine to do some other things; raise  the steam button., then safety switch will takes effort.

lnstallation of Accessories

1. Install the spray cup with hairbrush Hold the pipe section of the spray cup with hairbrush in your hand, align the arrow on the spray cup with th• sil,gle-line mark on short spray noz:ole on the machine b<>dy, and in.,ert the spray cup in position. Rotate the spray cup in clockwise directiQQ, and align the arrow on the• spray cup with the doul>le-lioe mru:k on short spray n.ozzle on the machine body, as shown in Figure J. Fix the• spray cup on the machine body. To remove the spray cup with hairt>rush, please rotate the spray cup inversely (counterclockwise) as shown in Figure 2, and align the atr<>W on the spray cup with the single-line mark on the machine body. Theo the. spray cup with hairbrush can be pulled out.

2. Install spray cup with round brush o,-bent spray cup For direct installation on short spray no<Zlo, aim the spray cup with round brush or bent spray cup at the top of spray-nozzle, as shown in Figure 3, and push the spray cup upwards until it is in position. As \he shott sp,:ay nozzle 3lld spray cup are positioned in six ditections, the angle and direction can be adjusted during 1he installation. Or, first in.,tall long spray cup and then the spray cup with round brush or bent spray cup. The long spray cup is installed in the same method .., the installation of spray cup with ba.irbrusb. The spray cup with round brush or bent spray cup and long spray cup can be installed in the same procedures as the installation on short spray nozzle.

3.  lnstallation of spray cup for door/window First install the spray-cup with balrbru,h on short spray nozzle As shown in Figure 4 and Figure S, iJ1stall the two small books of the pray cup for door/window onto sUSpension lugs of the spray cup with hairbrush, and then trigger the big boo!< of the spray cup for door/window, and p1’Sb the spray cup for door/window op and clutch it onto the body of tho spray cup with rush.

Refill water during operation

1. Unplug the power cord and disconnect the power supply
2. Press down the steam button to release the pressure until no steam is injected out.
3. Slowly unscrew the safety cap but do not remove it, and residual steam will be discharged slowly until no steam comes out. Then place the machine in a cool place to cool it down for about five minutes. Finally, completely remove the safety cap.
4. Use the funnel and measuring cup to refill a suitable quantity of cold or hot water into the tank.
5. Re-install the safety cap onto the machine body and tighten it in position-.

After the machine is used

1. After the cleaning machine is used, unplug the power cord and disconnect the power supply.
2. Press down the steam button to release the pressure until no steam is injected out, when no steam injected dut, raise the steam button, then safety s,vitch will take effort.
3.  Slowly unscrew the safety cap but do not remove it, and residual steam will be discharged slowly until no steam comes out. Then place the machine in a cool place to cool it down for about five minutes. Finally, completely remove the safety cap.
4. Empty the residual wat<,r in the tank and clean the external surface with a piece of dry cloth.
5. At last, re-install the safety cap onto the machine body and tighten it in position.

This appliance is not intended for use by pc,sons (including children) with reduced pby<ica!, sensory OT mental capabilities, or lack of ex.pcrieoce and knowledge, uoJess they have been given $upcrvisioo or instruction conceming use of tho appliance by a person res-po.llS:ible for their safety. Cltildrcn sbouJd be supervised to ensure that they do not play with the appliance. Tho filling aperture musl not be opened during use. DO NOT di,cct steam toMll<i., person>, animals or other electrical products.

Correct Disposal of this product

This marking indicates that this product shouhl not be· disposed with other household wastes throughout the EU. To prevent possible harm to the cnviro.nment or human health from uncontrolled waste disposal, recycl” it responsibly to promote the sustainable reuse of material resources. To return your used device, please 11se the return and collection systems or contact the retailer where the- product was urchased. The can take this roduct for environmentally safe recycling

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>