SVEN E-705BT Wireless Stereo Headphones with Microphone User Manual

Wireless Stereo Headphones
with Microphone
User Manual

BUYER RECOMMENDATIONS

• Shipping and transportation equipment is permitted only in the original container.
• Does not require special conditions for realization.
• Dispose of in accordance with regulations for the disposal of house- hold and computer equipment.

APPLICATION

SVEN E-705BT wireless stereo headphones with microphone are designed for operation with PC, notebookes and other mobile devices by means of data transfer via Bluetooth protocol. They can be also used in internet telephony, during video conferences, in multimedia applications, in interactive games, for speech recognition and  foreign language teaching.

PACKAGE CONTENTS

•  Wireless stereo headphones set – 1 pc
• USB power cord to micro USB – 1 pc
• Charging case – 1 pc
• Additional interchangeable ear pads set – 2 pcs
• User’s Manual – 1 pc
• Warranty card – 1 pc

SAFETY PRECAUTIONS

• Don’t use the stereo headphones while driving.
• Don’t use the stereo headphones at high volume for a long time (more than 15 minutes), as this may cause hearing impairment.

SPECIAL FEATURES

• Bluetooth wireless signal transmission
• Touch control of incoming calls and track switching
• Two additional sets of interchangeable ear pads
• Battery operation time up to 4 hours
• Operating time using a charging case up to 24 hours

DESCRIPTION

1. Multifunction sensor button
2. Headphones LED indicator
3. Magnetic contact with charging case
4. Ear pad
5. Charging case
6. Micro USB jack for battery chargingg Charging сase LED indicator

CONNECTION

First connection

• Remove both headphones from the charging case, then put them back to the case to activate the headphones.
• The battery in the headphones and case is used as an integral part of the device. Before using for the first time, make sure that the headphones are fully charged. If the headp- hones are discharged, they need to be fully charged (see headphone charging section).

Headset to a device interfacing

• It is necessary first to interconnect the device with a signal source (see the connection diagram in Fig. 2) to transfer signals via Bluetooth. To pair the headphones with the device, put them to the charging case, then get them out. Both earphones are automatically switched on and connected to each other. At the same time on the right earphone LED indicator 2 will alternate blue and red glow, and indicator 2 on the left earphone will light blue.

• It is necessary to select Bluetooth device search mode on a signal source (telephone, notebook, smartphone, etc.). «SVEN E-705BT», massage will be displayed on the screen, which is to be connected to*.

• If connection successful, there will be a short beep signal in the headphones; the search mode indication on the headphones is over. If no devices connected, headphones will turned off automatically in 2 minutes.

• If you cannot connect your device or connect a headset to each other, or the sound is played from only one earphone, you must re-enter the system to the search mode. Put the headphones to the charging case (headphone indicators 2 turn red), press and hold the multi-function button 1 for 8 seconds, until the light indicator b on the right earphone does not blink blue 4 times and then lights up in red.  Take headphones out the caseand they will automatically connect to each other. After that, pair the headphones with the device, as described above**.

• You might have to enter “0000” code to connect some models of devices via Bluetooth.
  ** If the item has been already registered to the source device list, then the second search mode activation is not obligatory. Choose only the item name «SVEN E-705BT» and the “connect” command on the source.

Bluetooth Technology

• Wireless data transfer via the Bluetooth protocol enables to connect wireless headphones to compatible devises. Maximum radius of action of data transfer is 10 m. Such obstacles as walls or other electronic devices can interfere with the signal transfer.

OPERATION

Case Charging

• Connect the charging case (jack f) 6 to PC USB port or USB charger using USB/micro USB cable (included). During battery charging indicator 7 lights red alternately. When device is charged full, indicator 7 is red. When the battery charge level is low LED indicator g lights blue alternately.

Case Headset Charging

• Put the headphones to the charging case. During battery charging indicator 2 lights red. When device is charged full, indicator 2 is blue within 1 minute, then go out.
• The battery in the headphones and case is used as an integral part of the device, therefore do not try to extract or replace it, because this can result in the warranty cancellation or the device damage.

Device switching on

• Remove the headphones from the charging case and they will automatically turn on. Make sure the headphones are charged.

Device switching off

• Put the headphones to the charging case. They will automatically turn off.

Headphone control

When connected to 1 telephone:

• In order to receive an incoming call press multifunction button 1 twice. Press button a twice again to finish the call;

• In order to reset the call, press and hold button a (~2 seconds)*;

• Рlay/Рause: while listening music press button a twice on the right earphone.

• Previous/Next track: while listening music press and hold button 1 on the right earphone to go to the next track, press and hold button 1 on the left earphone to go to the previous track.

• Depending on telephone/smartphone configuration.

TECHNICAL SPECIFICATIONS

microphone: -58 ± 3
Frequency range, Hz| headphones: 20 – 20,000
microphone: 30 – 16,000
Impedance, Ohm| 16
Membrane, mm| Ø6
Connection type| Bluetooth
Bluetooth supported profiles| HSP, HFP, A2DP, AVRCP
Radius of operation, m| up to 10
Operation time, h| up to 4
Operation time using a charging case, h| up to 24
Weight, g| 50

Notes.

• Technical specifications given in this table are supplemental information and cannot give occasion to claims.
• Technical specifications and package contents are subject to change without notice due to the improvement of SVEN production.

Congratulations on your purchase of the SVEN stereo headphones!
COPYRIGHT
© 2019. SVEN PTE. LTD.Version 1.0 (V 1.0).
This Manual and information contained in it are copyrighted. All rights reserved.
Technical support is on www.sven.fi.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>