SVEN GC-150 Game Pad User Manual

SVEN GC-150 Game Pad User Manual

DESCRIPTION

GC-150 gamepad can be used in different games such as simulators, arcades, shooter games etc. The ergonomic design of the GC-150 manipulator increases the accuracy of control during the game.

SAFETY PRECAUTIONS

• Do not disassemble or repair the device on your own. Maintenance and repairs should be carried out by qualified service centre staff only.
• Protect the device from direct impact of high humidity, dust, strong magnetic fields, vibrations, high temperatures, toxic liquids and gases.
• Instructions for device maintenance: for cleaning the case of the device please use clean soft cloth. Do not use such solvents as gasoline or spirit for cleaning, since these solvents can damage the surface of the device.
• Do not drop the device to avoid damaging it.

PACKAGE CONTENTS

• Gamepad — 1 pc
• Operation Manual — 1 pc
• Warranty card — 1 pc

SPECIAL FEATURES

• Ergonomic design of the gamepad
• Supports: Windows 7/8/10
• USB Interface
• 2 axes, D-Pad and 13 buttons
• 3 additional buttons “Turbo”, ”Auto” and “Clear”

SYSTEM REQUIREMENTS

• USB port available
• Windows 7/8/10 Operational System

DESCRIPTION OF CONSTRUCTION

1. D-Pad
2. Additional buttons “Turbo”, “Clear” and “Auto”
3. Buttons 1-4
4. Buttons “Select” and “Start”
5. Buttons “R1” and “R2”
6. USB cable
7. Buttons “L1” and “L2”

CONNECTION AND INSTALLATION

Connect the manipulator with a USB cable to an available USB port f on the computer.

• No additional software is required for operation.

• In order to test and configure the gamepad, choose «Control Panel» → «Devices and Printers», in the Windows control panel (gamepad is displayed as «USB Gamepad»), then right-click on the device icon and select «Game Device Settings» (administrator rights may be required) (Fig.3,4). The «Game devices» window will appear. You must select “Properties” (will flash the “Properties: USB Gamepad” window). In the «Check» tab, you can check the execution of commands when you press the buttons (Fig.5). To calibrate the joystick, select the «Settings» tab, click «Calibrate» and follow the instructions.
  
  
  

• Turbo” mode.
  This mode allows you to emulate a rapid repeated press of a button while holding it. To assign the selected button to this function, it must be clamped simultaneously with the “Turbo” button. To reset the function, press the button simultaneously with the “Clear” button.

• ”Auto” mode.
  This mode allows you to emulate the “sticking” button when it is pressed once. To assign the selected button to this function, it must be clamped simultaneously with the “Auto” button. To reset the function, press the button simultaneously with the “Clear” button.

TROUBLESHOOTING

After connection, the game
controller does not work
normally| А. Check whether the cable of the controller is strongly
connected to the USB port.
B. Open the Properties: USB Gamepad, and check that the
gamepad is connected correctly.
C. Restart your PC, if the controller still doesn’t work normally.
The analog axis worked
automatically without the
intervention of the player.| The manipulator calibration is not adjusted or confirmed after
adjustment.

If none of the above mentioned solutions removes the problem, please seek professional advice at your nearest authorized service center. Never try to repair the device on your own.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>