SVEN GC-2040 Wireless Gamepad Instruction Manual

SVEN GC-2040 Wireless Gamepad Instruction Manual

www.sven.fi

Congratulations on the purchase of Sven gamepad!

Please read this Operation Manual before using the unit and retain this Operation Manual in safe place for future reference.

COPYRIGHT

SVEN PTE. LTD. Version 1.0 (20.09.2021).
This Manual and information contained in it are copyrighted. All rights reserved.

TRADEMARKS

All trademarks are the property of their legal holders.

NOTICE OF RESPONSIBILITY RESTRICTION

Despite the exerted efforts to make this Manual more exact, some discrepancies may occur. The information of this Manual is given on «as is» terms. The author and the publisher do not bear any liability to a person or an organization for loss or damages which have arisen from the information, contained in the given Manual.

BUYER RECOMMENDATIONS

• Unpack the device carefully. Make sure there are no accessories left in the box. Check up the device for damage; if the product was damaged during transportation, address the firm which carried out the delivery; if the product functions incorrectly, address the dealer at once.
• Check up the package contents and availability of the warranty card. Make sure the warranty card has a shop stamp, a legible signature or the seller’s stamp and purchase date, and the number of the wall mount corresponds to that in the warranty card. Remember: in case of warranty card loss or discrepancy of numbers you forfeit the right for warranty repairs.
• Shipping and transportation equipment is permitted only in the original container.
• Does not require special conditions for realization.
• Dispose of in accordance with regulations for the disposal of household and computer equipment.
• The date of manufacture of the product is indicated on the box.

DESCRIPTION

GC-2040 wireless gamepad can be used in different games such as simulators, arcades, shooter games etc. Vibration feedback imparts a feeling of realistic experience during games. Rubber coating and ergonomic construction of GC-2040 enhance accuracy of its
operation during games.

PACKAGE CONTENTS

• Gamepad — 1 pc
• 2.4GHz USB Nano-Receiver — 1 pc
• Рower cable USB to micro USB — 1 pc
• Operation Manual — 1 pc
• Warranty card — 1 pc

SAFETY PRECAUTIONS

• Do not disassemble or repair the device on your own. Maintenance and repairs should be carried out by qualified service centre staff only.
• Protect the device from direct impact of high humidity, dust, strong magnetic fields, vibrations, high temperatures, toxic liquids and gases.
• Instructions for device maintenance: for cleaning the case of the device please use clean soft cloth. Do not use such solvents as gasoline or spirit for cleaning, since these solvents can damage the surface of the device.
• Do not drop the device to avoid damaging it.

SPECIAL FEATURES

• Ergonomic design of the gamepad
• Supports: Windows 7/8/10, PS3, Android*
• USB Interface
• Turbo function for continuous firing
• Built-in battery
• 4 axes, D-Pad, 2 mini joysticks and 11 buttons
• Soft-touch coverage for confident control while playing
• Digital and analog modes available

SYSTEM REQUIREMENTS

• USB port available

• Windows 7/8/10, PS3, Android* Operational System

• There may be incompatibility with individual versions of Android and models of Androiddevices.

DESCRIPTION OF CONSTRUCTION

1. D-Pad
2. Button SELECT
3. Button HOME
4. Button START
5. Buttons 1-4
6. Left joystick
7. Operation mode indicators
8. Right joystick
9. Button RT
10. Button RB
11. Connector for charging
12. Button LT
13. Button LB
14. Button RESET
15. USB nano-receiver

Fig.1 Top View

Fig.2 Front View

Fig.3 Bottom View

Fig.4 USB nano-receiver

CONNECTION AND INSTALLATION

Fig.5

Fig.6

• Connect the USB receiver to an available USB port on the computer.
• Download the software from the official site from the product page and run the program «SVEN Gamepad.exe».
• In order to test and configure the gamepad, choose «Control Panel» «Devices and Printers», in the Windows control panel (in the «XInput» mode, the gamepad is displayed as «Xbox 360 Controller for Windows», in the «DirectInput» – «PC / PS3 / PC360 / ANDROID»), then right-click on the device icon and select. Gaming device parameters (administrator rights may be required) (Fig.5,6). The «Game devices» window will appear. In XInput mode, the gamepad is displayed as «Controller (XBOX 360 For Windows)» (Fig. 7), in the «DirectInput» mode – «USB Vibration Joystick (BM)» (Fig.8). To switch between the «DirectInput» and «XInput» modes, you must press the HOME button for the 6 seconds. In the «DirectInput» mode, the second left LED lights up, and in the «XInput» mode – the 3rd LED lights up.

Fig.7

Fig.8

• To check and configure in «XInput» mode, select «Properties» in the «Game devices» window, the «Properties: Controller (XBOX 36 …» window will pop-up (Fig.9). In the «Verification» tab, you can check the execution of commands when you press the buttons and rotate the joystick. To calibrate the joystick, select the «Settings» tab, click «Calibrate» and follow the instructions.
  Fig.9

• To check and configure in DirectInput mode, select Properties in the Game Devices window, and the Properties: USB Vibration Joystick (BM) window pops up. In the «Test» tab, you can check the execution of commands when you press the buttons and rotate the joysticks, and also check whether the joystick is connected to the PC in the «Connected State» line (Fig.10).In the «Calibration» tab, you can center the position of both joysticks (Fig. 10). To do this, you need to set them to the middle position, then click «Default» and «Set». After calibration, you must click «Accept»or «OK» on the bottom line of this window to save the changes.
  Fig.10

• In the «Vibration Test» tab, you can check the operation of both vibrators together by pressing the «Both force» button; or separately, by pressing the «Left force» and «Right force» buttons. And also by rotating the left joystick in the analog mode of operation or by pressing the 8-way joystick in the digital mode of operation (Fig. 11). To stop the test, press the «Stop» button. Moving the cursor in the row «Vibration strengthv» we can increase or decrease the force of vibration. To save the settings, click «Apply» or «OK» in the bottom line of this window.

• The «About» tab provides information about the version of the installed driver.

• The device can work in analog and digital modes. The modes are switch by pressing the HOME button, depending on the mode, the operation mode LEDs light up. In digital mode, two axes are available (one LED on the left is lit), and in analog mode all 4 axes (two LEDs on the left are lit).

• With PS3.

• Connect the gamepad to an available USB port. The system will automatically establish a connection, and the LED corresponding to the number of the gamepad in the system will light up.

• With Android.

• To connect to devices running Android, you need a USB OTG cable (not included). After connecting the gamepad with this cable, the system will automatically establish a connection, while the two rightmost LEDs will light up.

• Connector for charging.

• To switch between the «DirectInput» and «XInput» modes, you must press the HOME button for 6 seconds. In the «DirectInput» mode, the second left LED lights up, and in the «XInput» mode – the 3rd LED.

Fig.11

Fig.12

TROUBLESHOOTING

If none of the above mentioned solutions removes the problem, please seek professional advice at your nearest authorized service center. Never try to repair the device on your own.

Wireless Gamepad

Model: GC-2040
Importer: Tiralana OY, Office 102, Kotolahdentie 15, 48310 Kotka, Finland.

® Registered Trademark of Oy SVEN
Scandinavia Ltd. Finland.

GC-2040

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>