hama 00124024 USB 2.0 and USB 3.0 Card Reader Instruction Manual

: June 9, 2024
: Hama

Table of Contents

Introduction
Explanation of Warning Symbols and Notes
Safety Instructions
System Requirements
Product Features
Getting started
Care and Maintenance
Exclusion of Warranty
Service & Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

hama 00124024 USB 2.0 and USB 3.0 Card Reader Instruction Manual

Introduction

Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Safety Instructions

The product is intended for private, non-commercial use only.
Protect the product from dirt, moisture and overheating and use it in dry rooms only.
Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
Do not drop the product and do not expose it to any major shocks.
Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
Do not open the device or continue to operate it if it becomes damaged.
Dispose of packaging material immediately according to locally applicable regulations.
Do not modify the product in any way. Doing so voids the warranty.
Keep this product, as all electrical products, out of the reach of children!

System Requirements

The Card Reader supports the following operating systems:

Windows 11 / 10 / 8/7/ Vista / XP
Mac OS 10.x or higher

Product Features

Note

You will find a list of the supported card formats on the packaging or at www.hama.com (enter the item number in the search).
Please refer to the packaging or our homepage www.hama.com (enter the item number in the search) to know whether the card reader supports UHS-I, UHS-II (SD / microSD) or UDMA (CompactFlash).
The maximum data transfer rate is achieved when both the card and the card reader support UHS-I, UHS-II or UDMA.
Please refer to the packaging or our homepage www.hama.com (enter the item number in the search) to know whether the card reader supports data exchange directly from memory card to memory card.

Getting started

Note – Compatibility

USB 3.1/3.0 card readers are downward compatible with USB 2.0.
No additional drivers are needed. The installation runs automatically.
Plug your memory card into the appropriate slot of the Card Reader.
Connect the Card Reader to an available USB port on your terminal device.
You can now run the data transfer between your terminal device and the memory card.

Warning – Data Loss

Ensure that the data transfer is done before you remove a memory card from your Card Reader.
Always use the eject function of your operating system before you remove a memory card from your Card Reader or disconnect your Card Reader (with inserted memory card) from your terminal device.
Data loss can´t be excluded at disregard!
Under no circumstance does Hama GmbH & Co KG accept liability for loss of data stored on data storage media.

Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents. Make sure that water does not get into the product.

Exclusion of Warranty

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/ or safety notes.

EAC Icon
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.