NOTIFIER BREAK-GLASS Kit Automatic Fire Alarm Warden Station Installation Guide
- June 9, 2024
- NOTIFIER
Table of Contents
NOTIFIER BREAK-GLASS Kit Automatic Fire Alarm Warden Station Installation
Guide
The break-glass kit comes with
a tempered glass plate, a hammer attached to a chain, and a screw to attach
the hammer to the door.
TO INSTALL BREAK-GLASS KIT
-
Remove metal plate from phone storage box by taking off the trim ring.
-
Locate and drill hole for the hammer. Attach chain with screw.
Flush Mounting
Surface Mounting
Hole Locations -
Place tempered glass plate on box in the space left by the metal plate.
-
Reinstall trim ring with wing nuts over the glass plate.
TO REPLACE BROKEN GLASS
- Remove any remaining broken glass with care.
- Insert tempered glass plate at an angle into upper left corner of door assembly (A arrow at right indicates direction of movement).
- Slide plate upward into the glass slot. (B arrow at right indicates direction of movement).
Removal of the trim ring is not required for this operation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>