HOVER STAR 2.0 Motion Controlled Stunt UFO Chrome Edition Instruction Manual

STAR™ 2.0
Motion Controlled Stunt UFO Chrome Edition

STAR 2.0 Motion Controlled Stunt UFO Chrome Edition

INSTRUCTION BOOKLET
WARNING: Never leave product charging unattended for extended periods of time.
Always disconnect your HOVER STAR 2.0 from the charger immediately after the HOVER STAR 2.0 is fully charged. Please refer to enclosed safety instructions.

PACKAGE CONTAINS:

HOVER STAR™ 2.0| USB Charging Cord| Instruction Booklet
---|---|---

Colors and styles may slightly vary from photo

FEATURES

• Easy to Launch and Fun to Play
• Obstacle Avoidance Technology
• Hand Motion Controlled
• New 360˚ Somersaults!
• Infinite Spinning and Hovering
• Crash Resistant Design for Extra Durability

CHARGING THE HOVER STAR 2.0

1. First make sure the HOVER STAR 2.0 power switch is in the OFF position (see diagram A) Next plug the included USB charging cord into the charging socket on the underside of the HOVER STAR 2.0 (see diagram A).

2. Connect the other end of the USB cable to either your computers USB port or a UL/CE approved USB wall charger (see diagram B). IMPORTANT: If using a high-speed USB wall adapter make sure that the output is less than 8V otherwise the HOVER STAR 2.0’s internal charging circuit will shut down for safety reasons and not allow the HOVER STAR 2.0 to accept the charge.

3. When charging begins, the indicator lights on the HOVER STAR 2.0 will light red to indicate that the battery is charging.
   When the battery is fully charged the indicator lights will turn a solid green color.

4. The charging time may vary depending on the remaining percentage of charge the battery had left in it from previous use. The average charging time is approximately 35-45 minutes. Once fully charged the HOVER STAR 2.0 operates for approximately 5-7 minutes depending on the intensity of play.

LOW BATTERY INDICATOR: During play, when the HOVER STAR 2.0’s batteries begin to get low, the onboard indicator lights will change to a solid RED color indicating that you have approximately one-minute left to play and shortly the HOVER STAR 2.0 will automatically begin to descend and land.

UNDERSTANDING THE ONBOARD INDICATOR LIGHTS WHEN FLYING YOUR HOVER STAR 2.0

• A BLUE light indicates that the HOVER STAR 2.0 is flying horizontally across the room.
• A GREEN light indicates that the HOVER STAR 2.0 is stabilizing and is in a good place for beginner and younger pilots to attempt a 360˚ flip.
• Solid RED lights indicate low power mode and you will not be able to perform 360˚ flips during this time.

HOVER STAR 2.0 DIAGRAM

THE HOVER STAR 2.0 WILL WORK BOTH INDOORS OR OUTDOORS. WHEN USING THE HOVER STAR 2.0 OUTDOORS TRY TO AVOID EXTREMELY BRIGHT OR DIRECT SUNLIGHT AS THIS MAY AFFECT THE INFRARED SENSORS. THE HOVER STAR 2.0 WILL WORK PERFECTLY IN OUTDOOR SHADED AREAS, AT DUSK OR AT NIGHTTIME. IT IS ALSO ADVISED WHEN USING THE HOVER STAR 2.0 OUTDOORS TO ONLY USE THE HOVER STAR 2.0 IN ZERO WIND OR VERY LIGHT WIND DAYS.
WARNING
DO NOT FLY YOUR HOVER STAR 2.0 IN FOUL WEATHER!

PREPARING FOR FLIGHT

• Verify that HOVER STAR 2.0 has been fully charged.
• Make sure the empty space has no obstacles that would obstruct flight.

DO NOT ATTEMPT TO FLY YOUR HOVER STAR 2.0 IF THERE IS RAIN, SNOW, HEAVY WINDS, THUNDER OR LIGHTNING OUTDOORS. IT COULD DAMAGE YOUR PRODUCT.

LET’S GET STARTED!

Follow these simple steps in the order below and you will be successfully flying your HOVER STAR 2.0 in no time!

1. Suggested to play indoors first to get the hang of it!
   When using the HOVER STAR 2.0 indoors, first find a room in your house with high ceilings and a large open space where you have room to walk around. You may need to move some furniture.

2. Make sure all external sources of wind like ceiling fans, floor fans or opened windows are turned off and closed. Central Air conditioning should be okay but it is a good idea to stay away from strong drafty areas.

3. Make sure your HOVER STAR 2.0 is fully charged.

4. Short press the Power Button until the LED lights on the HOVER STAR 2.0 turn on and become solid green (see diagram D)

5. Hold the HOVER STAR 2.0 in the mid-air and then give it a small gentle toss upward or simply release it as if you were dropping it from your hand. The HOVER STAR 2.0 will automatically turn on and begin hovering. TIP: Make sure to hold the HOVER STAR 2.0 level to ground when starting or it may fly sideways.

6. To stop the HOVER STAR 2.0 quickly capture the HOVER STAR 2.0 with your hand and turn it upside down (see diagram E) the blades will stop spinning.

7. When done playing make sure to turn the power off by depressing the power button for 3 seconds (see power button diagram on pg. 3 ) All the lights will turn off.

HOW TO CONTROL YOUR HOVER STAR 2.0

Your HOVER STAR 2.0 is equipped with motion sensors and air pressure sensors which read your hand motions to determine its direction for flight.
TO MAKE YOUR HOVER STAR 2.0 GO UP:
There are 2 ways to make your HOVER STAR 2.0 ascend:

1. Place one hand palm side up directly underneath the bottom of the HOVER STAR 2.0 and slowly move your hand straight up, HOVER STAR 2.0 will rise upward (See Diagram F)
2. The second way which will create a faster response, is to hold both your hands out simultaneously on both sides of the HOVER STAR 2.0 about two inches from the body so the HOVER STAR 2.0 is in the center space between your two hands. The drone will quickly ascend! (See Diagram G)

TO MAKE YOUR HOVER STAR 2.0 FLY HORIZONTALLY ACROSS THE ROOM:
Hold your hand up vertically palm side facing the HOVER STAR 2.0 like your going to push it away, but don’t actually touch it. The HOVER STAR 2.0 will begin to move in the opposite direction of your hand (See Diagram H).

TO MAKE YOUR HOVER STAR 2.0 MOVE FASTER AND FURTHER.
Once you have gotten the hang of controlling the direction of your HOVER STAR 2.0 simply move your hand along outside of the HOVER STAR 2.0 as it begins to fly away, literally follow the HOVER STAR 2.0 with your hand. The longer and faster you move your hand behind the HOVER STAR 2.0 the further and faster it will fly (See diagram I) Remember to follow behind it, not touch it.

HOW TO DO 360˚ STUNT FLIPS!

The NEW HOVER STAR 2.0 allows you to command 360˚ stunt flips with a special hand movement! Your HOVER STAR 2.0 has the ability to do a 360˚ flip in all 4 directions..

• First pass your open palm face down across the top of your HOVER STAR 2.0 from one side to the other like doing a horizontal karate chop in the air, you are crossing an invisible sensor
• Complete the move by rounding the corner and moving your hand down the side. The fluid combination of going across the top and down the side will activate the 360˚ Flip.

NOTE the HOVER STAR 2.0 will do somersaults in the direction of the side where your hand completed the movement (SEE DIAGRAM J1, J2, J3).

• GREEN MEANS GO! FOR BEGINNER and young players we suggest waiting for a GREEN light to show up on the HOVER STAR 2.0 before attempting the 360˚ stunt flip. The GREEN light indicates the HOVER STAR 2.0 is stable and level to the ground and will result in 360 flip that doesn’t launch very far and is great for beginner pilots. Once you get the hang of flipping you can begin more advanced stunt flips when the HOVER STAR 2.0 is in motion.
• FOR ADVANCED PLAYERS: Your HOVER STAR 2.0 is capable of 360˚ flips even when moving sideways at top speeds, we suggest that older children or more advanced players activate flips while the HOVER STAR 2.0 is in sideways motion. The sideways motion is indicated by a BLUE led light. Activating multiple flips when the HOVER STAR 2.0 is in motion can be exciting and fun but make sure you have a very large space to play in.

TROUBLE SHOOTING

If your HOVER STAR 2.0 drifts uncontrollably or does not respond correctly to the hand movements as explained above you may need to recalibrate the internal gyro sensor.
HOW TO RECALIBRATE THE GYRO:
a) First start with the HOVER STAR 2.0 in the power-on position. Next, hold the HOVER STAR 2.0 upside down (See diagram K).
b) Quickly depress and release the power button 2 times and the lights on the body should begin to rapidly flash red and green, this is how you know that you are in “Calibration Mode”. (See diagram L).
c) While the lights are flashing turn the HOVER STAR 2.0 back over right side up and set it on flat level surface (See diagram M).
d) When the lights stop flashing and you have solid green light on the body, you have successfully completed the calibration process and you are ready to fly!

HOW TO PLAY SAFELY!

Safety is number one and should be taken seriously! Please carefully study the below DO’s and DON’Ts so that you may always enjoy the safe operation of your HOVER STAR 2.0.

IMPORTANT SAFETY INFORMATION: KEEP YOUR HOVER STAR 2.0 AWAY FROM FACE AND EYES.

HOVER STAR 2.0 WARNING:

Always play in a large open space and warn spectators that you will be flying your HOVER STAR 2.0 so that they are aware of its position. Before flight, inspect the HOVER STAR 2.0 to make certain that there is no obstruction to the propellers or damage to the product and that everything appears to be in good working order.
WARNING!

• Choking/Cutting Hazard. Small Parts/Sharp Rotor Blades.
• Keep hands, hair and loose clothing away from the propeller when the power switch is turned to the ON position.
• Turn off the HOVER STAR 2.0 power switch when not in use.
• The included charger is built specifically for the HOVER STAR 2.0 Li-Poly battery. Do not use it to charge any other battery.
• Parental supervision recommended for children under 8 when flying HOVER STAR 2.0.

BATTERY WARNINGS

This HOVER STAR 2.0 uses an internal Li-Poly rechargeable battery and is not replaceable. If the battery can no longer be charged, dispose it properly according to local disposal requirements.
CAUTION: If the rechargeable battery leaks fluid, avoid contact with eyes and dispose the HOVER STAR 2.0.

• Rechargeable batteries are to be removed from the item before being charged (if removable).
• Rechargeable batteries are only to be charged under adult supervision.
• Exhausted batteries should be removed immediately and must be recycled or disposed of properly according to state or local government ordinances and regulations.
• The supply terminals are not to be short-circuited.
• Do not dispose batteries in a fire! Batteries may leak or explode.
• This toy is only to be connected to equipment bearing either of the following symbols: or ****

CARE AND MAINTENANCE

• To clean, gently wipe the HOVER STAR 2.0 with a clean damp cloth.
• Keep the toy away from direct heat or sunlight.
• Do not submerge the toy into water. This can damage the unit beyond repair.
• Parental guidance recommended when installing or replacing the batteries.

Limited 90-Day Warranty

NORTH AMERICA
AMAX Group USA warrants to the original consumer that this product is free from any electrical or mechanical defects for a period of 90 DAYS from the date of purchase. If any such defect is discovered within the warranty period, AMAX Group USA will repair or replace the unit free of charge upon receipt of the unit, shipped postage prepaid and insured to our warranty center ALONG WITH THE ORIGINAL RECEIPT evidencing that the product was purchased from an approved AMAX retail partner and that the product is still within the 90 day warranty period. The warranty covers normal consumer use and does not cover damage that occurs in shipment or failure that results from alterations, accident, misuse, abuse, neglect, wear and tear, inadequate maintenance, commercial use or unreasonable use of the unit. Removal of any parts/components voids all warranties. This warranty does not cover cost of repairs made or attempted outside by third-party individuals or companies. Any applicable implied warranties, including warranties of merchantability and fitness, are hereby limited to 90 DAYS from the date of purchase. Consequential or incidental damages resulting from a breach of any applicable express or implied warranties are hereby excluded. Some states do not allow limitations on the duration of implied warranties and do not allow exclusion of incidental or consequential damages, so the above limitations and exclusions in these instances may not apply.
REPAIR/REPLACE PRODUCT
If your product begins to malfunction or stop working, immediately contact our warranty center (contact details listed below). If it is determined that a return is necessary, our warranty department will issue you an RMA number/form and an address to the nearest return center for shipping the product to us. When honoring the warranty, AMAX reserves the right to either repair, replace or refund the product.
IMPORTANT NOTICE:
We will reject and return to sender returns that are not accompanied by an AMAX issued RMA form and RMA number so make sure to contact our warranty center before attempting to return your product!
PREPARATION FOR SHIPPING YOUR PRODUCT:
Please repack your product in a durable box, preferably in the original carton, and send it prepaid, and adequately insured. Include the RMA form that was issued by our warranty department along with your daytime telephone number and email address inside the shipping carton. If your warranty has expired and you still require service please contact our customer care team For further information please send all inquiries to: customercare@amaxbrands.com
IMPORTANT NOTICE!
DO NOT ATTEMPT TO SHIP YOUR PRODUCT BACK WITHOUT FIRST CONTACTING OUR WARRANTY DEPARTMENT AT: www.amaxbrands.com
Email: customercare@amaxbrands.com

FCC Part 15 B Notice
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Distributed by:
TRACTOR SUPPLY COMPANY
5401 VIRGINIA WAY
BRENTWOOD, TN 37027
For customer support,
call: 1-888-376-9601
www.TractorSupply.com

WARNING!
CHOKING HAZARD – Small parts.
Not suitable for children under 3 years.

Conforms to safety requirements of ASTM, CPSIA and FCC.
This product is manufactured by Amax Group
Office No.3,10/F Witty Commercial Building 1A-1L Tung Choi street,
Mongkok. Kowloon Hongkong
HOVER STAR™ 2.0 is the registered trademark of Amax Group USA, LLC.
©2022 All rights reserved. Visit us at www.amaxbrands.com

Made in China
C012-USA-V1.0

Documents / Resources

| HOVER STAR 2.0 Motion Controlled Stunt UFO Chrome Edition [pdf] Instruction Manual
STAR 2.0 Motion Controlled Stunt UFO Chrome Edition, STAR 2.0, Motion Controlled Stunt UFO Chrome Edition, Controlled Stunt UFO Chrome Edition, Stunt UFO Chrome Edition, UFO Chrome Edition, Chrome Edition, Edition
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>