Bauhoo Z12 3 in 1 Wireless Charging Station User Manual
- June 9, 2024
- Bauhoo
Table of Contents
Bauhoo Z12 3 in 1 Wireless Charging Station
Product Description
- 3 IN 1 charging design supports charging all iPhone series devices
- the charger can be used as a mobile phone holder
Specifications
| Name | 3 in 1 charging station |
|---|---|
| Material | Plastic+PC |
| Color | Black/ White/ Pink |
| Charging Port | Type-C |
| Input Current | 5V-3A |
| Phone Output | 10W |
| Watch Output | 2.5W |
| Earbuds Output | 3W |
| Adapter | ≥ QC 3.0 18W |
| Size | 16514115mm |
| Compatibility | All iPhone series, AirPods, iWatch |
| Product List | Charging station1 QC3.0 adapter1 TypeC cable*1 User |
manual*1
Lighting way| Power-on: the green light flashes three times and then goes out
Stand-by: light off
Charging: the icon attached corresponding devices lights green
Fully charged: light off
Operation Steps
- Firstly power on the device by our equipped QC 3.0 adapter and Type-C charging cable.
- When charging iPhone, iWatch, and Airpods devices, insert the iPhone and AirPods into the Lightning head and place the iWatch on the wireless charging area. Please insert your phone or airpods perpendicular to the lighting head and do not pull it too hard. When the devices are charging, the corresponding indicator icon turns green. The indicator light turns off when the device is fully charged.
Notes
- Adapter power supply and socket installation must comply with safety regulations.
- Adapter voltage requirements: between 4.9-5.3V, do not use non-standard power supply.
- Do not disassemble or break the product by yourself to avoid damage to the product.
- Do not expose this product to rain or moisture or high temperature.
- Optimum operating ambient temperature is -10℃-35℃.
- Please place the product away from flammable and explosive liquids, gases or explosives.
- For safety concerns, this product should be kept away from children.
- Do not place magnetic cards and metal objects in the charging area.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning : changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Radiation Exposure Statement
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>