SIEMENS Cerberus Pyrotronics CXL-UK Kit Instruction Manual
- June 9, 2024
- SIEMENS
Table of Contents
Cerberus Division
Installation Instructions
Cerberus Pyrotronics CXL-UK Kit
CERBERUS PYROTRONICSTM
Model CXL-UK Kit CXL
Software Rev 8.0
INSTALLATION
(Refer to WIRING below)
To upgrade CERBERUS PYROTRONICST” CXL software to Rev 8.0 or greater:
Remove all system power before installa-tion, first the battery and then AC.
- Install IC18, 1019, 1022, and IC5 as shown below. Note that IC19 is new effective with Rev. 8.0.
- Verify that 101, 102, and IC3 are present and that the switches are set as shown.
- When the installation is complete, connect the AC power first and then the battery to the CXL system.
WIRING
Siemens Building Technologies, Inc.
8 Fernwood Road Florham
Park, New Jersey 07932
P/N 315-091782-4
Siemens Building Technologies, Ltd.
50 East Pearce Street Richmond Hill,
Ontario L4B 1 B7 CN
firealarmresources.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>