TsMADDTs 10-US-X1S-FT02 Cordless Electric Nail Drill User Manual
- June 9, 2024
- TsMADDTs
Table of Contents
TsMADDTs 10-US-X1S-FT02 Cordless Electric Nail Drill
Easy to use Set to Care For Your Nails
- PLEASE CHARGE THE NAIL DRILL FIRST BEFORE FIRST USE
HOW TO USE
-
Insert your desired nail drill bit
-
Long press on the power switch and level 1 light up
-
Adjust the speed you want (6000/8000/9000/11000/13000mp)
-
Adjust the direction
▶up is clockwise rotation
◀down is counter clockwise rotation
-
Start your nail work
Tungsten Carbide Flame Bit
Remove acrylic and hard gel, polish nail surface. sidewalls, and cuticles
part.
Ceramic Corn Bit
Remove the surface gel. easy reach small and tight areas without scratching
nails
Ceramic Barrel Ball Bit
Designed for safe cuticle work, easily reach cuticle and sidewalls, without
damage the nails.
Brush Bit
Clean the dust on the bits or nails easily. Keep these bits clean
Flat-end Cylinder Bit
In treating the surface area and side grooves. Removing shine from the nail
plate.
Needle Bit
Filing away residual cured gel or cuticles in hard to reach areas. under-nails
clean, sidewalls. carving out designs and smile lines.
Safety Bit
Smooth round top. Doing surface work for backfill cutting, shorten, infill
cuticle.
Point Bit
In treating the surface area and side grooves. Removing shine from the nail
plate.
Micro Ball Bit
Safely removes dead skin, clean around cuticles and under he nails.
Ball Bit
Clean sidewalls and under the nails and prep for backfill.
Nib Bit
Used for delicate cuticle work, lifting the eponychium.
Flame Bit
Remove cuticles and dead skin, clean sidewalls, and under the nails. some nail
technicians use this for making designer style manicures.
Customer Questions & Answers
Q:Can I use it for natural nails, or it’s only for gel polished nails?
A:Sure, you can use it on natural nails, just be careful not to damage your
natural nail bed.
You can use it on a low speed without the smoothing piece for your cuticles.
Q:How long does the drill take to charge?
A:1.5 hours fully charged and apply 3 hours cordless working time. When the
indicator light is breathing, that means the device is charging.And when it
full charge, the light will stay on.
Q:How I use it when I first get it?
A: First, please full charge the device and make sure it can work on. If you
have any problem on your first use, please contact us ASAP. We will be here to
help you. Then after fully charged, you can use it wirelessly, follow the
usage steps and start working.
Q:How to maintain the nail drill?
Clean the nail drill after every use. Before cleaning, always unplug power
adapter from the electrical outlet. Clean the device with a slightly moistened
cloth. You can also moisten the cloth with a mild detergent.
If necessary, attachments can be cleaned with a cloth or brush moistened with
isopropyl alcohol. Dry them carefully afterwards.
If you don’t use it for a long time, please charge it every three months.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>